yeah, i seen that numbers b4,
from my experience, i tried to change adsl mode from default (G.Dmt/Multimode) to 'G.Lite' Mode!!!,
it was working at my old workplace when one day, the modem suddenly went haywire
then, i play2 la with the setting (followed my instinct ),
then ok la downstream around 1536, thats normal,right? try it, trust me

This post has been edited by leopardus: Nov 2 2008, 11:41 AM

hows my snr?is it good?


Attached thumbnail(s)

i think this manual would help u to tweak the modem
Preliminary Viking™ Chip Set Family CLI Reference Manual
if not mistaken, there is a command to cap ur modem manually, but i don't sure it works or not
this guide maybe the key to reduce the Rx line rate from your side



This post has been edited by leopardus: May 16 2009, 11:48 AM

refer Topic 3.272 modify dsl config
Page 496-500

maxdnrate <hexvalue>


but before that ,i need ur dsl config parameters.

if u don't know yet, here is the steps:

1) Run command prompt OR start menu>run>cmd

2) telnet

3) open <your modem ip> e.g: open 192.168.1.1

4) enter login and password

5) then, you can run any command from the 'thick text book'. to get the parameters, type

get dsl config

6) then, paste the results here...

Disclaimer: there are some commands that risk ur modem, i will be not responsible for any damages in your peripherals..

This post has been edited by leopardus: May 17 2009, 03:13 PM

ooh it should be ok,
oh well just wait for tmnut then