mine is now 10dB...
no dc
Streamyx Streamyx SNR Margin, --Read here if you face disconnections--
|
|
 Nov 26 2005, 02:48 AM
Return to original view | Post
#1
|
 
Senior Member
2,330 posts Joined: Jan 2003 From: 192.168.1.2   
|
|
Quote|
|
|
|
|
Apr 11 2006, 02:28 AM
Return to original view | Post
#2
|
|
Senior Member
2,330 posts Joined: Jan 2003 From: 192.168.1.2
|
Link Status Connected Us Rate (Kbps) 512 Ds Rate (Kbps) 1024 US Margin 27 DS Margin 31 Modulation MMODE LOS Errors 0 DS Line Attenuation 18 US Line Attenuation 14 Path Mode Fast Path planning to downgrade to RM66 |
|
|
Apr 17 2006, 01:52 AM
Return to original view | Post
#3
|
|
Senior Member
2,330 posts Joined: Jan 2003 From: 192.168.1.2
|
QUOTE(scorps @ Apr 11 2006, 04:17 PM) why?? i didn't change anytime about this..and why u choose the modulation as mmode?? why not glite?? tell me what the different between this mode??   i set it any default... |
|
|
Feb 15 2008, 04:59 PM
Return to original view | Post
#4
|
|
Senior Member
2,330 posts Joined: Jan 2003 From: 192.168.1.2
|
DSL Status: Connected
DSL Modulation Mode: MultiMode DSL Path Mode: Fast Downstream Rate: 1536 kbps Upstream Rate: 512 kbps Downstream Margin: 8 db Upstream Margin: 27 db Downstream Line Attenuation: 48 db Upstream Line Attenuation: 14.5 db Downstream Transmit Power: 12 db Upstream Transmit Power: 17 db Mine, the upload is much better. |
|
|
Jun 30 2008, 03:36 AM
Return to original view | Post
#5
|
|
Senior Member
2,330 posts Joined: Jan 2003 From: 192.168.1.2
|
With Phone Spliter.
DSL Status: Connected DSL Modulation Mode: MultiMode DSL Path Mode: Fast Downstream Rate: 1536 kbps Upstream Rate: 512 kbps Downstream Margin: 10 db Upstream Margin: 26 db Downstream Line Attenuation: 48 db Upstream Line Attenuation: 14.5 db Downstream Transmit Power: 12 db Upstream Transmit Power: 17 db Ah..... Downstream Margin become 10bd after using the phone spliter. ================================================== Without Phone Splitter. DSL Status: Connected DSL Modulation Mode: MultiMode DSL Path Mode: Fast Downstream Rate: 1536 kbps Upstream Rate: 512 kbps Downstream Margin: 20 db Upstream Margin: 27 db Downstream Line Attenuation: 48 db Upstream Line Attenuation: 14.5 db Downstream Transmit Power: 12 db Upstream Transmit Power: 18 db This post has been edited by Suk: Jun 30 2008, 04:13 AM |
|
|
Jul 31 2008, 07:14 PM
Return to original view | Post
#6
|
|
Senior Member
2,330 posts Joined: Jan 2003 From: 192.168.1.2
|
Connection Status Connected
Us Rate (Kbps) 1024 Ds Rate (Kbps) 8192 US Margin 3 DS Margin 8 Trained Modulation ADSL_G.dmt |
|
|
|
|
|
Aug 18 2008, 01:56 AM
Return to original view | Post
#7
|
|
Senior Member
2,330 posts Joined: Jan 2003 From: 192.168.1.2
|
QUOTE(Effect @ Aug 17 2008, 03:18 AM)  is bad eh?   any1 know what the problem with the ping? i tried some foreign country the ping even is lower compare with KL... can any1 help me i cant even play on9 games it's lagging  btw i keep getting ip address like 60.52.XX.XX , i tried to reconnect many times but still its giving me tht ip start > run > cmd > ping www.tm.net.my see the "ms" |
|
|
Jan 15 2009, 01:07 AM
Return to original view | Post
#8
|
|
Senior Member
2,330 posts Joined: Jan 2003 From: 192.168.1.2
|
QUOTE(feizhai007 @ Jan 12 2009, 05:40 PM) i called 1300889515, and they say you only get 80% of what you subscribed?i pay for the 1mb package....i used to get 1024..... this is what i get,o.o,my line att is high,margin is low,and i think i am using an underground cable?is it troublesome to fix it?does it cost alot?i am just 15 this year..i don't know alot about this. Try plug your phone cable ( use short cable) directly to Modem.. see your margin can goes higher or not. |
|
|
May 16 2009, 05:15 AM
Return to original view | Post
#9
|
|
Senior Member
2,330 posts Joined: Jan 2003 From: 192.168.1.2
|
QUOTE(aichiban @ May 13 2009, 08:58 PM) Browsing is too painful U have changed to G.dmt right ?Downloading (not p2p) also stopped halfway any way to improve? esp on the SNR Added on May 14, 2009, 11:27 ami called tm twice to reduce the Rx line they claimed they kenot reduce the Rx line rate from their side how do i reduce it? Did your SNR margin increase. Please connect your telephone cable to modem only > restart modem > and upload the SNR margin again. Attention to all Users, Your SNR margin must at least 12dB. higher better. What caused Disconnection, DSL light Blinking, / How to increase my SNR margin 1. Bad Internal Cable wiring, ( example, your house > 10 years, please change your house telephone wiring ) 2. Bad External Phone Wiring. ( Rewiring ) 3. Your Phone line got noise - call 100 to fix it. 4. Your Phone has alarm system - apply for another line. 5. Request other brand of Modem to test ( borrow from frd ) 6. Use shortest telephone line. avoid using old phone line, avoid using long phone line 7. Remove Spliter, Remove all phone cable, Remove Surge protector. FAQ: Q: I got SNR Margin below 12dB, what can i do. A: First, Is your connection stable? (Yes, nth i can do ) (No, Please read above) Q: I got SNR Margin above 12dB, but always disconnect, What can i do. A: Make sure u connect your phone line directly from Phone socket to Modem. Q: I apply for 512kbps package, but i check in Modem, it stated 2048kbps or 1536kbps. A: 1. Is your SNR margin below 12dB, and frequently disconnect ? Yes, Request TM technician to lower the speed capped at the DSLAM. once they did, your modem will state. as your package speed. Rate my post if this is usefully. Thanks. suk This post has been edited by Suk: May 16 2009, 05:29 AM |
|
|
May 16 2009, 05:41 PM
Return to original view | Post
#10
|
|
Senior Member
2,330 posts Joined: Jan 2003 From: 192.168.1.2
|
QUOTE(aichiban @ May 16 2009, 02:48 PM) phew...so think Aichiban what is your connection problem? didnt manage to find rx line reducing though. thanks Slow or DC ? try to ping 192.168.1.1 and www.tm.net.my Guide : Vista start > type cmd > type "ping 192.168.1.1" XP : Start > run > cmd > type "ping 192.168.1.1" |
|
|
Mar 29 2010, 12:19 AM
Return to original view | Post
#11
|
|
Senior Member
2,330 posts Joined: Jan 2003 From: 192.168.1.2
|
QUOTE(aidilsyar @ Mar 22 2010, 03:37 PM) can help me explain this.... right is betterleft no spliter and right with spliter....which 1 better??? |
| Change to: |  0.0190sec
 0.49
 7 queries
 GZIP Disabled
Time is now: 5th December 2025 - 01:34 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.