Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

Streamyx Streamyx SNR Margin, --Read here if you face disconnections--

views
     
Gh-x
post Feb 13 2010, 02:28 AM

Casual
***
Junior Member
475 posts

Joined: Nov 2006
From: Kuala Lumpur


QUOTE
Mode: ADSL2+
Line Coding: Trellis On
Status: Connected
Link Power State: L0

  Downstream Upstream
SNR Margin (dB): 30.1  14.2
Attenuation (dB): 10.0  6.1
Output Power (dBm): 12.4  -4.5
Attainable Rate (Kbps): 15034  1301
Rate (Kbps): 2047  508
MSGc (number of bytes in overhead channel message): 65  16
B (number of bytes in Mux Data Frame): 54  14
M (number of Mux Data Frames in FEC Data Frame): 1  1
T (Mux Data Frames over sync bytes): 1  3
R (number of check bytes in FEC Data Frame): 0  16
S (ratio of FEC over PMD Data Frame length): 0.9129  1.0000
L (number of bits in PMD Data Frame): 482  248
D (interleaver depth): 1  2
Delay (msec): 0  0

Super Frames: 2521223  456162
Super Frame Errors: 0  0
RS Words: 0  203362
RS Correctable Errors: 0  40
RS Uncorrectable Errors: 0  N/A

HEC Errors: 0  0
OCD Errors: 0  0
LCD Errors: 0  0
Total Cells: 197232628  2358828346
Data Cells: 43098769  192499780
Bit Errors: 0  139084

Total ES: 0  372
Total SES: 0  286
Total UAS: 16  70166
How is my line, does Attainable Rate mean i can get 15mb connection on this line? so can upgrade to 4mb line right?

This post has been edited by Gh-x: Feb 13 2010, 02:29 AM

 

Change to:
| Lo-Fi Version
0.0333sec    0.67    7 queries    GZIP Disabled
Time is now: 4th December 2025 - 07:08 PM