Dude.... open eyes wide wide, read and COMPREHEND before you shoot yourself in your arse....

Removing the cat should not have increased the noise to such high level that you can hear it from the cabin.....

Could it be the 4-2-1's 2in stainless steel pipes giving out higher resonance than compared to the shorter ori 4-1 extractor??

Also, do you have the pic of the ori extractor, wanna see if they are the same for 1.8 and 2.0...??

I suspect the noise level increased due to the stainless steel pipes and the longer length, as compared to ori short steel headers.....

And yet you change the header to 4-2-1.... bravo....

What you did only changed the header (aka extractor) and removed the cat con.... but you are still using the ori muffler box and the end pipe (the box you see from the back of your car). In this muffler box, they exhaust pipe gos thru a series of bends (designed to increase back flow pressure to help with low end performance) and there are plenty of noise insulation foams in the box to help reduce the "noise" from the back..... thats y the ori exhaust "note" is relatively soft and silent....

To improve higher end performance, some ppl change the intake and exhaust, to increase the free flow of air from the intake (bigger snorkel, K&N Filter, Open Pod), change the header (from short ori to longer 4-2-1) remove cat con, remove 1st silencer box, and change the ori mufflers box to straight flow.... all done to ensure better and faster air flow, more air the easier the fuel burns and the better the high end performance lor....

---

Added on February 13, 2012, 9:29 pmCan just read the max HP churned out, from the dyno...???

This post has been edited by Poadster: Feb 13 2012, 09:29 PM

Nice.... 115 ponies, similar to the one Rublik had when he first dyno his car.....

Just curious, what does the Lancer dyno show as their max HP...????

That means you can get 120++ HP with K3 remap lor....

Where? How much for rims? What tyres and how much each donut??

Hmmm... how come the rear tyre/rim come out from the wheel arch so much wan???

Don bluff....!!!

When you buy 18" u oredi using SSR Type C, so you mean TE37SL oso no 18in...?????

Not found by you dont mean dont have.....

Sorry, old unker tot one is rear wheel.....

You kena this a few times and you still dont learn....

The shop dont have, mai go other shops and check lor..... even if the shop have stock, you still go other shop to compare prices....

Me cheapskate and poor.... not reeeeeeech like you ma.... u can install, take off and re-install others....

---

Added on February 13, 2012, 11:00 pmOh blimey, much apologies.....!!!

This post has been edited by Poadster: Feb 13 2012, 11:00 PM

Old man cant squint too much see the pic la.....

+42 means comes out a lot compared to stock +46.... also, 225/45/18 is thicker and wider, so it seems come out more....

Nice shoes....!!!

On the contrary...... u reeeeeech.... buys and pays RM2500 in CASH.....

Me cheapskate, ask what bank merchant their credit card machine, then uses credit card from the same bank, and then apply for 0% interest free installment plan.....

So i pay in 12months installment, more cheapskate and poor......

Installment plan la.... each month pay.... not owe CC pay minimum..... diff la....

His new one RM1800..... while your used ones RM5100.... see the diff when you can lok your mummy card...????

CHAbutzzz....

See.... this is how the reeeeech ppl behave..... no mods wor....

Now change back to 18in.....

For LHD Mirsu Lancer..... prolly from China..... dont fit our LHD car....

How much???

Not launched ma..... y butthurt???

May get the 1.6 coz me cheapskate ma.....

---

Added on February 14, 2012, 12:20 amShhhh.... u never see i ask how much meh....?????

Shoo shoo.....

This post has been edited by Poadster: Feb 14 2012, 12:20 AM

Price leh???

We still have you "the Ferarri killer" ma.....

Also your car oredi have KNN+snorkel, 4-1 decat, and stage 2 remap with custom map..... and ave 210km/h drives..... who can touch Inspira wor....???