Outline ·
[ Standard ] ·
Linear+
Samsung Galaxy S II Official Thread V27, New Users, Please read the 1st Post!
|
antt00
|
 Feb 21 2012, 08:10 AM
|
|
QUOTE(hykho @ Feb 21 2012, 07:46 AM) Now with CR V6, tried neak kernel, but having the svnet wakelock, drain 60% batt overnite. Then change to Siyah 2.6.12, also got the svnet wakelock. Remember antt00 using Siyah 2.6.7 got no svnet wakelock problem. Any other good kernel with no svnet problem recommend? All kernel i tried will have svnet wakelock (unless you turn on flight mode i think). Just that on siyah 2.6.7 it is not as severe as 2.6.12. 60% batt drain is extreme and i dun think its related to svnet. I am guessing it is some other app draining your batt. |
|
|
|
|
|
antt00
|
Feb 21 2012, 09:28 AM
|
|
|
QUOTE(hykho @ Feb 21 2012, 08:40 AM) Around 3hours of svnet wakelock.. I think the battery drain mainly from svnet... Check others... All normal..
Added on February 21, 2012, 8:47 amI leave wifi on.. Normally drain around 5 to 10 % overnite.. Svnet wakelock for almost 3 hours.. Will try siyah 2.6.7 and monitor again.. 3 hrs is not normal. Try another kernel like siyah 2.6.7 or redpill 1.3. |
|
|
|
|
|
antt00
|
Feb 21 2012, 04:41 PM
|
|
|
QUOTE(erymanthus @ Feb 21 2012, 04:39 PM) The famous sayings go "If it ain't broken, don't fix it"..  But if you break it, you can experience new things...  |
|
|
|
|
|
antt00
|
Feb 21 2012, 05:45 PM
|
|
|
QUOTE(snigapoe @ Feb 21 2012, 05:40 PM) turkbey v35 + neak kernel 1.3.3x + thunderbolt script I think got something wrong with this combo as i also get sod/hang.  |
|
|
|
|
|
antt00
|
Feb 21 2012, 09:11 PM
|
|
|
QUOTE(ZRong223 @ Feb 21 2012, 09:09 PM) Hmmm I can get this amount of ram if I restart the phone. My RAM will increase until 450mb after 50hours of uptime. Now the RAM keeps constant at around 500mb ( 210 hours of uptime for now). This should be normal I think? I have 4 page of widgets. Most are original while there are 2 from other apps. My ram usage is similar to yours. Its normal. As long as your phone dun slow down or lag its not an issue. |
|
|
|
|
|
antt00
|
Feb 21 2012, 09:18 PM
|
|
|
QUOTE(ZRong223 @ Feb 21 2012, 09:14 PM) Thanks. You reply helped me a lot!!  I have nearly the same opinion with yours one. However, I feel strange as there are many people telling me that they have only 300 - 400mb of ram usage only. Why can't I reach it? T.T I get 3++ at boot. Then it normally goes to 400 - 500 and stays there. Try exiting app/games properly. This post has been edited by antt00: Feb 21 2012, 09:19 PM |
|
|
|
|
|
antt00
|
Feb 22 2012, 07:57 AM
|
|
|
QUOTE(abdane @ Feb 22 2012, 03:19 AM) galaxy s2 stoped vibrating !!! after rooting via doomlord, it was working, but when added CWM, the vibration stopped working automatically !!! help ? G or nonG version? Flash a diff custom kernel specific to your model. |
|
|
|
|
|
antt00
|
Feb 22 2012, 08:56 AM
|
|
|
QUOTE(Wira_lover @ Feb 22 2012, 08:50 AM) guys my S2.. with airplane mode on, no wifi, no network, no data, no live wallpaper,exit all apps, lost 13% battery in standby mode when i went to sleep at 11.30pm-6.30am. is this normal? no blackmarket apps, ori ROM, not rooted etc. what might be the issue? what can be draining my battery? No its not normal. Try using betterbatterystats to see if any app is causing problem. |
|
|
|
|
|
antt00
|
Feb 22 2012, 09:18 AM
|
|
|
QUOTE(kazama82 @ Feb 22 2012, 09:13 AM) DXKL3 Firmware info PDA:DXKL3 PHONE: DXKL1 Date: 15/12/2011 Android 2.3.6 MultiCSC Package (GLB, MM1, SIN, SMA, STH, THL, XEV, XME, XSE, XSP, XTC, XTE, XXV): http://www.multiupload.com/AK0TGH6WXXDXKL3 Stock Kernel: http://www.multiupload.com/PY2EJTIQ2EPassword: intratech@XDA
Added on February 22, 2012, 9:14 ami heard you need to used different kernel to make MC3 working.. I think his problem is that the multiupload link is dead. QUOTE(reapertiew @ Feb 22 2012, 09:06 AM) anyone can upload the stock dxkl3 firmware again??? plz...  Look in samfirmware. |
|
|
|
|
|
antt00
|
Feb 22 2012, 09:28 AM
|
|
|
QUOTE(Shizuru @ Feb 22 2012, 09:25 AM) Ergh.. if that's the case, I guess I will just have to delete the game then. I deleted that game as well cos i run out of space in my internal SD. Maybe i should look into hacking gameloft games to use the external sd. |
|
|
|
|
|
antt00
|
Feb 22 2012, 09:34 AM
|
|
|
QUOTE(MYstombox @ Feb 22 2012, 09:31 AM) Its not so much on the game side, but whether the firmware allows apps2EXT. Need to partition the extSD into 2 with 1 being EXT3 another being NTFS. Worth a shot at it. I did ext partition before when on HD2, dun really like it. Dun ask me why its just a feeling. Feels insecure with your data in external sd because for me the external sd is more easily to get damaged or corrupted. And also removing the ext partition later is not easy. There is this patch here http://forum.xda-developers.com/showthread...hlight=gameloftto move gameloft data to external sd. But never tried before and there could be a few games that won't work. |
|
|
|
|
|
antt00
|
Feb 22 2012, 09:43 AM
|
|
|
QUOTE(MYstombox @ Feb 22 2012, 09:42 AM) EXT partition removal is easy using console parted, or chuck it into a SD reader to format. Well that did not work on my previous SD card that i formated to add a 1GB ext 4 partition. I gave up after sometime and just let it be.
Added on February 22, 2012, 9:45 amQUOTE(snigapoe @ Feb 22 2012, 09:37 AM) yea unless i can found back the version i use before this other than this i only can run them manually
Added on February 22, 2012, 9:39 amno need to be hacking just some 2 line script will do i have done it not only for gameloft but for other application as well even papago gps data file also on external sd card  just notice your sig v36 came out already? gonna flash it hope solve my problem Turkbey V36 is just a minor update to incorporate the latest jkay. Which script i have heard of it but dunno where it went? Also saw a program that will do what you said as well  http://forum.xda-developers.com/showthread...hlight=gameloftThis post has been edited by antt00: Feb 22 2012, 09:45 AM |
|
|
|
|
|
antt00
|
Feb 22 2012, 09:46 AM
|
|
|
QUOTE(MYstombox @ Feb 22 2012, 09:45 AM) why ext4? parted gives u ext2 then u gotta swap it to ext3. It was recommended for operating HD2 android roms. HD2 got very small internal memory and no internal sd. |
|
|
|
|
|
antt00
|
Feb 22 2012, 09:53 AM
|
|
|
QUOTE(MYstombox @ Feb 22 2012, 09:47 AM) I know, I have a milestone as well. But it was recommended to swap to ext3 and not 4. HD2 android roms are mostly ext4. Forgot why already, there was a thread comparing ext 2, 3 and 4 and in the end most favored 4. |
|
|
|
|
|
antt00
|
Feb 22 2012, 09:56 AM
|
|
|
QUOTE(MYstombox @ Feb 22 2012, 09:55 AM) No, the ROM itself can be ext4 or YAFFS, but the external SD card, is not relevant to that. CM7 runs YAFFS but my ext partition is on ext3. I ran CM7 without any ext. The rom was light enough. 
Added on February 22, 2012, 10:00 amQUOTE(tenchi0205 @ Feb 22 2012, 09:27 AM) anyone had tried [LPH]Batista70 FOXHOUND EDITION 0.1 Are you trying it? It seems most of the user here still prefer stable GB. I will probably be waiting for official release before moving to ICS. GB is already fast and smooth for our device. This post has been edited by antt00: Feb 22 2012, 10:00 AM |
|
|
|
|
|
antt00
|
Feb 22 2012, 10:21 AM
|
|
|
QUOTE(Wira_lover @ Feb 22 2012, 10:18 AM) do you guys normally keep the : background data on or off? auto sync - off or on? mine was checked on both. could this be the cause of severe battery drain ? background data - on auto sync - off |
|
|
|
|
|
antt00
|
Feb 22 2012, 10:27 AM
|
|
|
QUOTE(Shizuru @ Feb 22 2012, 10:26 AM) restore my nandroid backup. on CF-root also have MC3 FC prob  have u tried editing the build.prop like that guy on xda? |
|
|
|
|
|
antt00
|
Feb 22 2012, 10:38 AM
|
|
|
QUOTE(Laier @ Feb 22 2012, 10:35 AM) Guys,what I can't receive any MMS via my phone ah? Already applied the DiGi MMS settings. But,my phone can't receive it. Our phone model is I9100G,right? For the G variants. Is your data turned on? |
|
|
|
|
|
antt00
|
Feb 22 2012, 10:46 AM
|
|
|
QUOTE(Shizuru @ Feb 22 2012, 10:37 AM) haven't flash back thunderbolt! yet since my last wipe last night. Do I still need to use the restore pack? Well first try this. Do a wipe data/factory reset. Do not restore anything only the MC3 see can run or not. |
|
|
|
|
|
antt00
|
Feb 22 2012, 10:50 AM
|
|
|
QUOTE(brotan @ Feb 22 2012, 10:49 AM) is it worth it to upgrade? Umm, he is using galnex...  |
|
|
|
|
Quote
0.0433sec
0.82
7 queries
GZIP Disabled