hi, sharing my result tat i juz did today
kingston value ram ddr3 1333@9cl oc to ddr3 1600@7cl, 1.65v
screenshot taken about 6mins after 1hr20mins of bf3 gameplay
loving it~



This post has been edited by crrazzycat: May 27 2012, 01:25 PM

u mean taking actual photos of the modules? if so, sry cos its alot of work n also cos i m lazy XD~~~ but i'll take snapshot u_u
your rams r running at higher speed, not? i c 952@cl6

both stick double sided(heard the saying alot, but i hav no idea wats the difference wiv single-sided)



*how come your aida benchmark shows nb speed but mine shows fsb ratio, i c same version...

This post has been edited by crrazzycat: May 27 2012, 05:21 PM

erm... comparing our benchmarks, although i do see difference in gaming performance after setting, seems 7cl timing doesnt mean absolute advantage over 9cl, i m thinking its your higher cpu speed? if tats the case then i wont feel so discouraged, cos the gains r so minimal(i know its juz benchmark results, which in reality, i wont experience the difference of 1.5ns latency, but... >"<)

i only started oc'ing my rams a year after i bought my pc, n was only running 733mhz@9cl, then overtime i tried tightening timings more or increasing the clocks. up till few months ago was running 880mhz@9-9-9-22-31-1t, 1.65v, not stable for long hrs operation. since then i've always like tighter timings so i tried lower clocks n timing n added volts again.

the photo, becos u went tru the trouble for it as well, i guess it'll hav to respect the request, but has to b tomorrow but peeping inside(sff case), i see kingston printed on the chip, n the kvr lable too


my cpu has probably got a bad core or something, it can boot at 3.9ghz, but it wont work stable at anything above 3.68ghz, not even with 1.45v, n i wont try any higher volt, so, sigh...

thnx for the link to proc oc, will check into it

actual shots


according to manuals info, they r the same modules like yours, mine is babg


my mobo has got 1866 oc feature, i think tis helped alot




*i went tru the oc list again n noticed something, can i know wat is the 2nd volt for?
*example : fatalynx | X6 1090T | asus sabertooth 990FX | 2 x 2GB ADATA G series DDR3-2000 CL9 @ 9-9-9-24 | 1540MHz | 4-7-5-18-28 1T | 1.63v | 1.262v | Dual Channel

thnx in advance for enlightening

thnx for clearing my nb-cpu volt is 1.287

erm, i hav no idea whether those rams r relabeled o not, the info i hav, i got from my mobo manuals, those digital copies r exactly the same as my hard copy