QUOTE(kchoo @ Apr 26 2012, 02:04 PM)
Thanks for the recommend

Not looking for the r3 edition, just standard will be fine. Will google ACT subang.
Added on April 26, 2012, 2:06 pmThanks

I probly will have to change the cat-con due to the corrosion problem, but what is a mid-section bullet?
I got a quote from Proton, could be between rm400 (half) - rm700 (full set) not inc labour... is it just me, or is that expensive?
Too expensive. just go normal exhaust shop can d. Just make sure you get stainless steel pipes when replacing any section. Lasts longer than the standard ones (for 2007 above, 06 & below have better quality pipes for some reason)
Definitely ditch the cat, replace it with bulltet. It looks something like below. If you go exhaust shop sure can see one. No need spiral or whatever crap design the shop tells you. Normal one also ok d.


QUOTE(NOX @ Apr 30 2012, 12:50 PM)
what mileage is your car? time to over haul the aircond system.. ready rm1k ++.. ask jiash for recommend shop..
he already did his.. most >5 year car will have prob with aircond sooner and later..
*jiash _87 search for his id, he's quite popular selling automotive parts..
Ya meh? Mine 6+ years d never had aircon problem so far (touchwood), works just fine. Just refill gas 2 times only. First time, it ran out, 2nd time because take out compressor, so have to refill. Just make sure you use "proper" gas on it and clean the blower fan every once in a while. Which reminds me, time to clean mine also.. hehe
For the 1 sided hot air problem, check piping. Most likely got blockage from compressor to inside. No need to take out everything. Most aircond shops can do this.
Jiash one was cooling coil problem, have to take out whole dashboard and replace coil. That's why so expensive..