i'm using front perdana spring on my rear end, but already cut 2 ring out so not so tonggek.. but now regret.. cause still sangkut blakang..

david, so it struck the bumper side.. ok.. will do something later..
fender is for front side.. sure makan tyre @ cutting the tyre on front..

i have that mounting buffer before on my rear standard spring but car look hediously high..
change to perdana better but rubbing issue on 4 people inside..

any shop to recommend on rolling front fender? or any tyre shop can do?

lolz..

r3 i think bodykit.. some put r3 muffler, r3 spring..

r3 version got but need extra moolah to make one.. hahaha..

mine is equipped with r3 muffler..

dunno.. i heard that too.. the fiber inside easily fried.. but till now using near to 2 year.. still sound ok to me..

might want to dekit r3 cause wanna go prang prang one.. haha..

inspect first, if not broken no need change la..

normally change during timing belt change.. but depends..

both belts cost less 100, labour depend on shop..


Whats wrong with JEC? i'm using the blue cable, so far so good..

metal grind during idle on morning startup?

mine have that problem too.. if depress clutch, noise dissapear.. release, it appear again..

wah.. everyone jump ship.. me sail on another but still sayang to sell this superb small car..

good share..

want to sent my car to osman baba later..
ask this magician to treat my bluey carefully until can perform like new..

i think so..

mine have this same issue.. got noise when clutch not press..
press clutch, no noise..
but only happen during cold start..
fix after engine warm up..

Is it me or your headlamp turn to oldslkool before restore look?

nice rim..
hunting for abs and tyre next week.. might go for 2nd tyre again, budget puny..

90 per piece for 195/50/15.. 50-70%.. ori tayar made outside malaysia.. shop in puchong.. hunting for pirelli..

wahhhh.. nice ICE stuff.. me cant stand the paper speaker of standard one in my wife swift, change to aftermarket.. my savvy run on mtx speaker.. got it during purchase of the car.. just change my HU to sony single din and use that plastic coverplate too..

update of my car :
i just change my sawi 3 x 195/50/15.. include balancing rm100 per rubber.. 2nd tyre from puchong shop (behind tesco extra)..

front both old eagle f1 already end of life with 20% treadware and very noisy, changed to bridgestone turanza.. tyre from japan, treadware is 50% left but nice grip yoo..

change one of rear tyre cause old one crack like wrinkle on nanny face.. worry tyre blow, so change same pirelle p5000 made in italy.. treadware is superb 80%..

next month schedule is absorber change. all gone now. can feel car not absorb bump on uneven road surface. just on spring only.

new problem arise, speed sensor. during drive back seremban yesterday kmh drop 0 near seremban exit. damn. 2 year ngamsoi spoil again.

Alpine hu.. Double din.. Huhu.. Most likely rm1000++ i guess..

Modulator sousou la.. Can hear different if use cd compare to modulator la.. I cant stand the buzz of the fm modulator used one before..

This post has been edited by NOX: Dec 12 2013, 08:20 PM

change extractor 4-2-1, power up.. but not good for environment.. more pollution cause no catcon (catalizer converter-resonator is not)..

mine cut off the catcon long2 time ago.. feel power up a bit cause engine can exhaust gas faster..

or is it absorber?

sure paper one aa? sound not paper to me..
previous owner change speaker already?

sure paper one aa? sound not paper to me..
previous owner change speaker already?

4 possible problem overheat :

Radiator - leak, clog, coolant not working.
Temp sensor - spoil.
Motor fan - spoil or cable not good connection.
Thermostat - spring kaput or thermostat housing leak.

Mine, change coolant not solve, change motor fan solve the prob halfway, last change thermostat housing straight away no problem anymore now, if hike 4 bar then few sec back to 3 bar.

I once go to,mr ho, straight suspect my head bengkok.. Wtfish, say change new engine better RM2k.. Walouweiii.. Go other shop one by one troubleshoot.. Cuci radiator once together flush new coolant..

thermostat block water in engine wall.. heat up and vapour it.. water not circulating to cool down la tu..

just my assumption*

david, how much?

if gatal later want install too..

wah.. so silence..

just got my hand on a set of stopper.. did not fix yet at my car..

hope it can solve my rubbing rear end issue..

yoko parada will be my next tyre if things work fine.. haha..

What does that mean bro? Cant understand..