The fan really anoying at 65%++ >.<

I want water block!!!

Sure... but i dont know why my 3Dmark score is 0 >.<

Its been about 5 years since im benching my rig ahahahah

help here~

here the pic...


and why my score really low ? or is it because i max all the setting.....



This post has been edited by kambing69: Jan 21 2012, 09:45 PM


Attached thumbnail(s)

WTF with this scores!!


Owh ... thanks for the info

Here's the latest OC at 1000mhz


PS: OC'ed @ GPU:1000mhz + CPU:5ghz (i5 2500k)

This post has been edited by kambing69: Jan 23 2012, 05:08 PM


Attached thumbnail(s)

NICE score..!!!

I cant even make it for 1150/1575 for stable OC now... it seems it really need water block >.< ... because i ran graphic test for straight 3 hours and it seems there 2 error detected (with temp avrg:78 max 82)

PS: and when i increase the cvolt it crash ....

This post has been edited by kambing69: Jan 31 2012, 07:14 PM

Mine was gigabyte version . . . it can be OC'ed at 1150 but the heat was #$%^&, unless i manual set the fan... i tried bum volt . . . but ntg happen, its kinda weird because i still can only max OC it up till 1150/1575 or do i need to restart PC to adjust it further?


BTW i share my OC result in this thread before

OCCT is for GPU or CPU??

For the OCCT how much shader and what resolution should i use.. the default?

Nice marks...but i dont play lost planet, dint like FPS actually... playing skyrim now >.<

Quick question, CCC version 12.1 dint support 7900 series right? so we using 11.12?

shepard... i got question...
with default voltage, i can get 1125 core clock but i need to set the memory clock at default clock (1375) if i want to do it more, it seems i need to add volt(havent tried to increase volt yet)....

So the question is... core clock or mem clock better set higher?


note: last time i said i cant OC beyond 1050 right? it's because i dint increase the volt and the power limit (set it at 0%)...

right now already tested 1200/1550 with 1175cvolt.... seems stable but the heat was #@$%T^Y around 80~88 so i readuce back to stock volt..

This post has been edited by kambing69: Feb 9 2012, 01:51 AM

Aik???? is 1175 the stock voltage??? because before this using MSI burner my voltage was set at 1049 (core voltage <---in MSI burner). . . so the stock was 1175 ? not 1050/1049? (with 1050cvolt i can use around 1025/1450 stable OC'ed..

This post has been edited by kambing69: Feb 9 2012, 01:58 AM

O.o


Okok2 let straigten thing now... what the default volt for the GPU actually Now im confuse too


Good Job!!!

This post has been edited by kambing69: Feb 9 2012, 02:01 AM

>.< dont OC'ed it over 1200/1550 because with stock cooler even set at 95% my temp jump too 80~85....

right now using 1125/1525 with 1100 core volt..

used this to test stability .. Tech GPUTool or OCCT stability test

This post has been edited by kambing69: Feb 9 2012, 02:10 AM

Owh... that's why i saw diffrent ppl with diff stock voltage.. dint get it before..
Thanks for the info~

Why my score really low eh ??

OC'ed @

1150/1525 @ 1125volt.... need to retune... but dont have time... now its time for Skyrim!!!!









Edited: dint see it was P scoring.... (max temp running 3dmark 63)

---

Added on February 9, 2012, 2:39 amDont be because your ASIC value really high >.< mine was 84.9% only


This is the description about the ASIC value "Lower % = higher leakage chip = easier to overclock because it can take a higher voltage. But a higher leaking chip requires a higher voltage to operate at the same frequency (a low leakage chip may require only 1.05V to operate at 925Mhz while a high leakage chip requires 1.125V), so power consumption and heat are increased. " taken from GPU-Z page

This post has been edited by kambing69: Feb 9 2012, 02:45 AM


Attached thumbnail(s)

You are AWESOME!!!! . ..


one more thing WTF with my score... i cant even get pass 9k marks in Performance benching...




PS: already clock at 1150/1600

edited: is CPU contribute that much for score because im using 2500k running at 4.8

This post has been edited by kambing69: Feb 11 2012, 02:09 AM


Attached thumbnail(s)

damn!! i though soo

thanks for the info~

No idea... what your current volt right now? You better ask in intel 1155 OC room for this...

Im thinking about this too... Will wait for gtx680 review 1st. . Then i decide.. but but..i already order one waterblock !!... aish.. Hope 680 will out late late later this year.. ahaha



This post has been edited by kambing69: Feb 13 2012, 06:12 PM

What game? my skyrim yesterday lagging very very bad.... 5fps only..

ahaha, well that because of my graphic mod dint go well.... btw, i got BSOD many time when trying to OC before...
Posibilities if your GC performance down because of the software/forceware/ccc . . i dont think BSOD can make hardware performance down... maybe abit but not noticable..

This post has been edited by kambing69: Feb 14 2012, 10:51 AM

right now my voltage @ 1046 clocked at 1040/1450 this is the most stable i can get with stock voltage... i dont want to add voltage now because the heat, need to wait for my Water block from cyntrix >.< then il add 1.2 volt....for 24/7 hours...

owh my temp when playing game around 73' with customize fan speed (afterburner) . .
I find that the stock fan speed too slow and because my room doesn't have ac, i really need to customize the fan speed....make it around 50~80 at 60c and above...

sry for late reply, kinda bzy yesterday ..

Faith, you dont need to clock higher than 1040 for crysis2 or other for most of the game... because 7970 already fast enough even at stock clock~(unless you using more than one monitor) . .



im using 11.12 CCC already... just waiting for the officiall ccc for 7970.... arghhh cant wait, because skyrim +enb +SAOO max + FXAA max = crash >.< ahahaha


This post has been edited by kambing69: Feb 16 2012, 09:22 AM