Hi All,

Join our LIKE My Ride Contest in Facebook.

Contest Details:
http://stiffring.com/contest.html

http://www.facebook.com/media/set/?set=a.3...85827140&type=1

Thank you.

Hi,

Yes, we have plenty of model coming soon including local car brand proton and perodua.

For more details about coming soon model, please visit our website:
www.stiffring.com/event.html

We commit to study & design for each type of car model, making Stiff Ring to perform maximum effect to improved car handling and suspension setup.

Thank you for our kind customer support.

Hi all,

Kindly contact Chin 012-670 5167 we will help you to solve this issue. You can come over to us and install at our panel installer in Cheras.

Fyi, some Myvi subframe is really badly misalign but not to worry, we will help you solve it.

Further enquiries, you can contact us via info@stiffring.com

Thank you,
Stiff Ring

Hi, we have contact the mention dealer and they will get back to you again after they try another way to install at their other Myvi.

We also replied you in email, thank you.

Stiff Ring

Hi, you are welcome guys.

Customer satisfaction is our priority. We are happy to help.

FYI, promotion for some Proton Model is now started.
Check out www.stiffring.com/event.html
or our facebook
http://www.facebook.com/pages/Stiff-Ring/275332785827140

Thank you
Stiff Ring

Hi, yes Kancil/Mira, Kenari/Move, Kelisa is not applicable for this concept.

Check out our promotion for Proton models !! Hurry up !! While stock last !!

http://www.facebook.com/photo.php?fbid=378...&type=1&theater

Thank you,
Stiff Ring

---

Added on February 11, 2012, 5:35 pmHi,

Please see our Proton Model Promotion !!

Proton Model Promotion

Thank you,
Stiff Ring



This post has been edited by stiffring: Feb 11 2012, 05:35 PM

Hi all,

Sorry for the late reply.

Clarification: The picture shown by member moon is not our product.

Yes, we develop based on each car model for upper & bottom neck Stiff Ring design.

The upper neck is use to sit into car chassis.
The bottom neck is use to sit into subframe/crossmember bolt hole.

Some of the car model do not have the upper neck due to no space on chassis bolt hole.

In this case, in order to maximize the effectiveness, we develop for the upper Stiff Ring with the neck is facing down and sit into the subframe bolt hole. Which means, upper Stiff Ring neck facing down, bottom Stiff Ring neck facing up. Both neck sit into subframe bolt hole. Thus, maximize the effectiveness of prevent subframe from moving.

More info:
http://www.facebook.com/photo.php?fbid=387...&type=1&theater

http://www.facebook.com/pages/Stiff-Ring/275332785827140

http://www.stiffring.com

Hopefully we could clear your doubts.

Thank you,
Stiff Ring

Hi,

We have a offer for Proton Iswara/Saga LMST for being reference.

Kindly contact us via info@stiffring.com for more info.

Offer is first come first serve, we only require 1 car.

Thank you,
Stiff Ring

Hi,

We have replied your email.

Hope hearing from you soon.

Thank you,
Stiff Ring

---

Added on February 18, 2012, 11:15 amHi,

Subframe/Crossmember

Some newer car model use subframe.
Some older car model use crossmember.

Thank you,
Stiff Ring

This post has been edited by stiffring: Feb 18 2012, 11:15 AM

Hi,

We do not have this model at the moment.
You might go for customization option.

Contact us via info@stiffring.com for process and pricing.

Thank you,
Stiff Ring

Hi all,

Sorry for the late respond.

For more efficient communication, contact us via info@stiffring.com / our facebook page:
http://www.facebook.com/pages/Stiff-Ring/275332785827140

FYI,

Crossmember/Subframe at some points is used to support the car engine/transmission/steering rack and it's also used to hold and give support to the car suspension setup. It's tighten directly to the car chassis to suppose maintain the car geometry setup.

The imperfect is happen in this situation where the crossmember/subframe is able to move and not perfectly align to the car chassis due to the big bolt hole. A small position shift occur on the car crossmember/subframe during a stress situation will cause a big compromise on the suspension setup.

Thus, eliminating this problem will helps on the car handling.

Hope this helps.
Thank you,
Stiff Ring
www.stiffring.com

Hi all,

Stiff Ring Sponsor 4 Cars in Dato Sagor Track

7AM-3.30PM Sunday 11/03/2012

Event info:
http://www.facebook.com/events/304200719646519/

More info:
http://www.facebook.com/pages/Stiff-Ring/275332785827140

See you there...

Thank you,
Stiff Ring

Dear all members,

Enjoy 20% EXCLUSIVE DISCOUNT for any purchase at Litar Dato Sagor on Sunday !!
(Term & Condition apply. Not valid for promotion items)

www.stiffring.com/model.html

Stiff Ring

---

Added on March 13, 2012, 10:31 amSTIFF RING WON THE RACES IN DATO SAGOR CIRCUIT !! Congrats to our Stiff Ring sponsor cars !! Finish 1 & 2 in both CATEGORY & GRAND CHAMPION RACES !!

http://www.facebook.com/photo.php?fbid=405...&type=3&theater

This post has been edited by stiffring: Mar 13 2012, 10:31 AM