any lubang on 3rd party firmware for MF 60 to run on usb power without battery?
Cause I can turn on, the screen show 'please insert battery'

as far as i know, mifi some model capable to run without battery dont need third party software, like the novatel mifi, just plug in cable power, and on and use direct,..
MDMA 1.0.0.31 Beta 10 , if u use any modem like Huawei, u can select which frequency ( UMTS900MHz or UMTS2100MHz ) u want to use,. and it will help your modem to concentrate in signal, as 900MHz signal is stronger indoor and 2100MHz is stronger outdoor
Download here :
http://nerve.org.za/mdma/mdma10031beta10.zip----------------------------------------------------------------------------------------------------------------------
For User who facing error on Com Port is using by other application, Please close your Maxis/mobile partner/ other dashboard first before u RUN MDMA,....
----------------------------------------------------------------------------------------------------------------------
To use MDMA connect your Huawei modem:
(please do step below for Error 623 cannot find the phone book number )
U need to create a RAS( 2 TV + 1 telephone icon / dial up ) connection so your MDMA will connect when u click connect :
1) go to open network and sharing centre
2) set new connection or network
3) connect to internet
‎4) choose dial up
5) set the *99# dial number
6) connection name -> MDMA
7) click connect
8) click skip
9) done
10) disable Netbios at MDMA connection ( remember this step )
11) run MDMA
12) click connect
----------------------------------------------------------------------------------------------------------------------
U can click Reset Device when u need to unplug your modem and replug into USB port to save u from do the unplug and replug action,.. is not good for usb port if u did it too many times ,.
---------------------------------------------------------------------------------------------------------------------
For those who need to check balance through *menu # send, you can try to use USSD command, enter *100# ( for maxis ) and press send USSD.. the menu will disaply on the MDMA column
-------------------------------------------------------------------------------------------------------------------
If u want to check what Firmware /com Port & other detail of your modem , u can click device info
---------------------------------------------------------------------------------------------------------------------
For this MDMA, u need to move your modem around in Your area and keep click Detect Device button to find better signal...
How to determine signal is good ?
1) green bar is higher = good signal
2) RSSI number lower = good signal
3) SNR ( sound and noise ratio ) number lower = good strong signal
Lastly, Huawei modem is best choice to support MDMA FULLY,.. other modem some might support and some dont support,..