Gonna try that.

meaning, if i wanna upgrade/downgrade openwrt to openwrt i will just use sysupgrade? if i restore the the trunk from your file will i get the original default setting, or the setting with iptv which had been created?

anyway blindbox, take ur time, i just found out that my NAS HDD DIE!! This might be why suddenly upnp and port forward works weird from openwrt

Depends how you do it. If you took my compiled file, and ticked the box that tells you to reset everything after flashing, it will go back to the settings with iptv created. If you took openwrt's official images, and do the same thing as the previous sentence, it will go back to openwrt's default i.e. no vlans configured at all.

lol
Busy la bro, been a while didn't test OpenWRT since the last RC4/5 ..... last night started to re-test again, so blur-blur thought still RC, so just grab the bottom one RC6, honestly didn't notice the final was released

Guess it's time to test & document the reset procedure then re-test on the final release ....

Previously, for ftp I tested the vsftpd ok no problem. But for the Transmission, I remembered initially was ok, just that Transmission is quite hungry suck most CPU power, after some tests (also forgot what I did) the Transmission keep eating up the flash memory size until "no space left" error and the router freeze/crash/re-start ...

Ya later I read somewhere about the extroot thing, trust me, being a part-time-beginner, my whole head wet may be you can show me more layman term on how to setup

Not sure whether new build/release fix it, may need to find time to test again .... but I don't really feel like putting the Transmission on this 400Mhz cpu with 32MB ram size again, also worry the swap space might not fast enough, it's just too hungry ...

Thanks for ur advice...

u use wr941nd for unifi ?

Thank you.

yes, but i plan to replace with 1043nd . hopefully, the stock will available soon.

oic, u just use 1043nd for usb storage ?

Thank you.

With regards to my guide on the USB here:
http://klseet.com/index.php?option=com_con...d=103&Itemid=95

I re-visit & test recently, seem like I'm unable to mount the external USB2 HDD properly, fstab & swap space seem ok, but can't see the main storage /mnt/sda2 under df -k
which I'm now thinking this could possible cause my Transmission "no space left" issue, I'm suspecting it could be combination issues with build/partition layout/mount point/packages/etc ....

I'll find some time this weekend to re-run/test again on latest final build, will post the steps once result confirmed.

This post has been edited by klseet: Mar 9 2012, 01:26 PM

installed: OpenWrt Backfire 10.03.1 / LuCI 0.10.0 Release (0.10.0)
kernel version: 2.6.32.27

everything runs smooth. just install the luci-ddns apps for my dyndns account.. no problem for now..

Guys, after upgrading to OpenWRT firmware from TP link firmware, do I have to setup or install anything else?

I'm thinking of getting OpenWRT since I just can't get my router to enable ddns since it keeps getting stuck at 'connecting..' ever after I restart it several times.

Should I reset it?

you can use firmware from blindbox which just need to enter your user name and password
or if you use OpenWrt standard image, you can follow https://forum.lowyat.net/index.php?showtopi...post&p=49570563

May I know is it only TP-Link 1043ND with OpenWRT can replace tm router? how about other router such as dir825 with openwrt?

my luci-app-ddns didnt update the hostname once modem rebooted.. how ah? need to manually push the service? lazy to ssh ah hahahahaha

i will said yes, because it support VLAN configure just like 1043 ND i think you can follow the same configuration
as in https://forum.lowyat.net/index.php?showtopi...post&p=49570563

but i dont think is a good idea, as dlink 825 cost u 340RM and 1043nd only 150, do you want to burn the money for something similar?

I'm using DIR-825 right now.. and bought it long long time ago already..

Hi there!
You can refer to the following:-
http://forum.lowyat.net/index.php?showtopi...post&p=39681542

@blindbox: did u tried freedns?? i tested it but seem like openwrt fail to talk to it. It never update the ip everytime i reconnect..

Hi I'm not a Unifi user but am just exploring the 1043ND. May I know for those who are on OpenWRT, does it support VLANs of UP TO 2000?

You're right it doesn't work. I'll see what I can do with it.

VLANs follows the IEEE's vlan standard, i.e. you can do vlan 1-4096.

EDIT: I found out that freedns just doesn't work right now. It's a bug that openwrt is currently having.

This post has been edited by blindbox: Mar 14 2012, 09:08 AM

i've found a solution for freedns (afraid.org) to update the ip everytime the WAN unplugged/plugged or modem reboot.

at this office rite now, so no screenshot. sorry guys.. so heres the step:

assuming ur at the MYDDNS TAB:

1. Service - Select CUSTOM
-after select CUSTOM OPTION, automatically the below OPTION become CUSTOM UPDATE-URL

2. Go to http://freedns.afraid.org/dynamic/ and u will see ur own hostname there eg: ahlong.smokeganja.org
- see the Direct URL button? point ur mouse there and copy the entire URL and put it in the CUSTOM UPDATE-URL field at ur modem.
- this because afraid.org changed their update ipaddress using a unic hash sums for user.

3. Hostname - ur previous hostname

4. Passwd - urs not mine (haha)

5. Source of IPaddress - Interface

6. Interface - WAN (pppoe-wan)

Others leave it to default

7. Save & Apply

then try reboot ur modem and check back the IP address.

Sorry for the long explaination. Will try to take a screenshot tonite at home.

hope u guys understand my step? haha?