My stacker
hmm the wiring will do later after i finish testing
cause i left the 3 extra 6 pciex hanging since was using ultra slied and gtx slied last time
but plan is by end of the year either run quad or dual core atleast 4ghz
with crossfire 24/7

then will be complete monster

This post has been edited by cstkl1: Oct 20 2007, 11:53 PM

later bro
cause now sometimes changing proc/ thermalpaste/ reading voltages etc

trying to find the best stable 24/7 mhz to run . also hmm might give up this proc

anybody looking for a e6850 that can do 3.6ghz at 1.39v stable

also as i said i left some pcie wires hanging.
lexus setup weird

he could have done it the easy way
just get another hdd cage
and invert both..
also it would solve a lot of sata cable wiring and u can hide them..
invert the fans also..
thats what i did and my hdd temps are fine all 4 of them .. and it will coold down ure gpu for top
and ure mobo for hdd cage below.
put ure dvd drive in between them.

will post detailed pics after i am done with this search for the best proc.


This post has been edited by cstkl1: Oct 21 2007, 01:01 AM

sishh will post later
i used 2 vizo's for the hdd cage
just get another cm hdd cage.. its cheap
invert them so pulling air from front

kekek damn easy to do this case
the top above the cage.. kekek mine is clear of all cables right to the PSU.. u can see it clearly.. plan ure wires

ok for the hdd cage y invert reason is this..
the cm hdd cage u have space between the side plates.. u can run and hide ure sata and sata power connectors here.

u need to push ure hdd cage further in so u can use the stock filter at the front.
trust me and i say .. that will solve ure sata cable clutter and sata power connector clutter.. cannot be seen at all..

ok for the fan bit for both hdd cage
theres a space on the side.. mobo tray..
run all your wires including the 24pin along it
thats one of the reason y i told u to do ure optical drives in between .
the 2nd cage u can bring it down almost to the bottom but leave that one small space down there..
y u ask
here u can place all your led/etc power rubbish... and best part the molex from ure psu all hidden behind the inverted fan of your hdd..

i know the explanation is hard but its not that difficult.. just tiring to do it.
promise to post as soon as i settle this comp.
it was perfect when i was running the 8800 ultra's but didnt take any pics.

just posted since i saw u had a stacker.. so wanted to give u some ideas.
PS for stacker keep to the mesh grill looks cooler and get rid of the side 12 fans.. if i was u..
i know a lot of dust. .but regular cleaning no probs

hmm for your usb and front power connector..

get a strap measure them to be perfect and run them exactly at the top of the mobo plate.

dude u can definately do perfect cabling for this case
except for the side 12cfm thing would be a problem.