Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 >>**LYN Perodua MYVI Owners Club vTwentyONE°°<<, The New Myvi -> The Best Gets Better!

views
     
canho
post Dec 27 2011, 11:31 PM

Getting Started
**
Junior Member
103 posts

Joined: Oct 2004
From: Kuala Lumpur


QUOTE(chs880221 @ Dec 27 2011, 11:18 PM)
Hello, I am new here and driven my one month old myvi 1.5 se manual so far. I am encountering some problem and would like to know if anyone could help me out. The fuel consumption for the past 1 month was around averagely 16.8 km / l or rm 40 I could go around 310km - 340km depending on my foot.One of the problem is during gear shift from 2nd to 3th gear, there is a "click" sound after 10 minutes of driving and thereafter and no such sound for other gear shift. The other problem that worries me is the EPS system. I dun know how it actually function. During high speed, yes it should be tighter, but when I slow down, the steering is still tight. Sometimes upon driving around 20km per hour the steering will be lose but sometimes not, how does the eps actually function towards different speed? Solution from dear sifu here is very much appreciated T_T
*
Good FC you get man!!! for city drive i only get around 15km/L ++
I suggest go back to SC take a check for your EPS system, maybe have issue over there.

This post has been edited by canho: Dec 27 2011, 11:50 PM
canho
post Dec 27 2011, 11:34 PM

Getting Started
**
Junior Member
103 posts

Joined: Oct 2004
From: Kuala Lumpur


QUOTE(billy_overheat @ Dec 27 2011, 11:33 PM)
i thought the foaming is a way to insulate the noise?  sweat.gif  sweat.gif
*
I think will help on overall handling and some noise, because reduce bending on the body when cornering or bump.
canho
post Dec 27 2011, 11:44 PM

Getting Started
**
Junior Member
103 posts

Joined: Oct 2004
From: Kuala Lumpur


Just done a photo shoot for my bella,
Is my 1st try on light painting shot... smile.gif
user posted image

And Area51SE, can you update my car photo? Thanks
canho
post Dec 27 2011, 11:47 PM

Getting Started
**
Junior Member
103 posts

Joined: Oct 2004
From: Kuala Lumpur


QUOTE(billy_overheat @ Dec 27 2011, 11:38 PM)
btw, changing to 15' rims, adding front struct bar + anti roll bar, large pot brake kit and changing suspensions, will it be increasing the handling a lot? i dont really like the handling now. for instance, body roll is kinda obvious even in low speed.
*
You need take a balance on overall, power and handling...
Larger wheels and tires size sure will increase handling but sure will lose power as well.
Personal suggest is take a balancing and look something you like.
canho
post Dec 27 2011, 11:54 PM

Getting Started
**
Junior Member
103 posts

Joined: Oct 2004
From: Kuala Lumpur


QUOTE(billy_overheat @ Dec 27 2011, 11:50 PM)
power is not really my concern though as manual is serving me good, losing a bit is ok as i dont use MyVi to be like a RACE CAR as those youngsters did on highway.  doh.gif  doh.gif
*
Haha... for me, handling is important that others... but sure i will remain the power as good as i can without power mods.
Please go a head for rear anti roll bar, is a faster solution to solve Myvi body roll issue!!!
canho
post Dec 27 2011, 11:55 PM

Getting Started
**
Junior Member
103 posts

Joined: Oct 2004
From: Kuala Lumpur


QUOTE(Area51SE @ Dec 27 2011, 11:45 PM)
195 would be enough already LOL
Nice Rims Bro! I like it. Updated your photo smile.gif
*
Thanks bro!!!
canho
post Dec 28 2011, 12:04 AM

Getting Started
**
Junior Member
103 posts

Joined: Oct 2004
From: Kuala Lumpur


QUOTE(ikiey @ Dec 27 2011, 11:57 PM)
After i change to wider tires, my top speed drop 190kmh to around 180kmh(same distance accelerate, but think it have a bit more go, but dare not try cuz acceleration was getting really slow n need longer straight)... Not only the width is important, whats important is also the tire's rolling resistant... Higher rolling resistant tires surely will sap more power from our tiny engine...
*
You are right bro!!!!
canho
post Dec 28 2011, 05:25 PM

Getting Started
**
Junior Member
103 posts

Joined: Oct 2004
From: Kuala Lumpur


QUOTE(colinwong89 @ Dec 28 2011, 06:22 AM)
To those with Myvi LB manuals regardless of 1.3 or 1.5, what are your cruising speeds at 110km/h on fifth gear?
*
Lighter wheels from Rays, Enkei or others expansive brand sure will harder compare to Taiwan made replica wheels smile.gif


Added on December 28, 2011, 5:26 pm
QUOTE(GamersFamilia @ Dec 28 2011, 09:06 AM)
may i know the sports rim size plus the tyre size , i might get myvi extreme edition next month
*
Currently run on 15inch 6.5J Enkei RP01 Replica wheels and 185/55R15 tires smile.gif

This post has been edited by canho: Dec 28 2011, 05:26 PM
canho
post Dec 28 2011, 06:48 PM

Getting Started
**
Junior Member
103 posts

Joined: Oct 2004
From: Kuala Lumpur


QUOTE(yhlim93 @ Dec 28 2011, 06:23 PM)
mine full tank rm60 oni cn run abt 31X km n it start blinking d zzzz


Added on December 28, 2011, 6:24 pm

if wan thn str8 buy branded taiwan rims lik advanti all those rite?


Added on December 28, 2011, 6:25 pmand how much will b trade in value for SE3 rims? approx...?
*
Different shop will get a different price for it.
And also judge on condition or wheels, i suggest make a wash before trade will get some extra point smile.gif
I trade in my original SE 1.5 Wheels + 2 weeks old goodyear duraplus tires with Rm900 in Klang.
canho
post Dec 28 2011, 08:00 PM

Getting Started
**
Junior Member
103 posts

Joined: Oct 2004
From: Kuala Lumpur


QUOTE(megat89 @ Dec 28 2011, 07:50 PM)
is the ride of the 1.5 se is really bad?...the suspension is bad for comfort driving is it?..how is it compare to the 1.3?..i hate hard suspension..feel like the brain also vibrate when hitting potholes..
*
No worry about stock suspension setup, is soft enough and comfortable as your request.
But just suggest install a rear anti roll bar for less body roll when take a high speed corner. smile.gif


Added on December 28, 2011, 8:05 pm
QUOTE(ikiey @ Dec 28 2011, 07:52 PM)
Hehehe, thanks Bro.. But very hard to get... Even when im on the highway, i even let all the lorries etc passed me n i need to avoid being on the left most lane because need to let the pass without loosing much momentum, n after the lorries etc passed me, i go back to the left most lane.. like evry 3-4 sec look at my rear view.. Takot kacau other motorists... N damn sleepy for me to drive that slow.. But, well, for the sake of experimenting...  tongue.gif  I wonder if with KnN air filter n irridium plug maybe can get even better FC reading...?? N also with low resistant tires n not my potenzas...??? hmm.gif hmm.gif
*
I have a better ideal to get a better FC when in highway,
Just following behind a bus, sure will get low wind block from bus behind
but for sure is dangerous because bus block front view of the road. XD

This post has been edited by canho: Dec 28 2011, 08:05 PM
canho
post Jan 4 2012, 06:00 PM

Getting Started
**
Junior Member
103 posts

Joined: Oct 2004
From: Kuala Lumpur


QUOTE(matmoto5125 @ Jan 4 2012, 05:28 PM)
I think I saw Myvi SE 1.5 is fitted with 2 different tyres. One with Continental CC5,  the other is Goodyear NCT5.

Any difference in driving experience?
*
i get a Goodyear Duraplus on stock... sad.gif
canho
post Jan 4 2012, 06:10 PM

Getting Started
**
Junior Member
103 posts

Joined: Oct 2004
From: Kuala Lumpur


QUOTE(V12Kompressor @ Jan 4 2012, 06:08 PM)
wow,

dont be sad. You'll be amazed how long that tyre could last.
*
My duraplus last for less that a week.... XD
Current run on PS3
canho
post Jan 4 2012, 06:16 PM

Getting Started
**
Junior Member
103 posts

Joined: Oct 2004
From: Kuala Lumpur


QUOTE(V12Kompressor @ Jan 4 2012, 06:13 PM)
=.=

i feel like wanna cekik you thru the internet.

sad for nothing.
*
Base on the tires shop saleman told me, if i get better stock tires will get a better trade in value...
But is already pass... looking forward!!! smile.gif
canho
post Jan 4 2012, 06:34 PM

Getting Started
**
Junior Member
103 posts

Joined: Oct 2004
From: Kuala Lumpur


QUOTE(V12Kompressor @ Jan 4 2012, 06:18 PM)
they always tell you beautiful lies de lah

even if you take a set of Pirelli to trade in, they will just say "second hand tayar all depending on the bunga only".

Always twist and turn just to satisfy the customer. haha
*
yah... sure their have a lot of reason...

Now i fine with my PS3 and PS3 did a good job as well smile.gif

canho
post Jan 4 2012, 07:03 PM

Getting Started
**
Junior Member
103 posts

Joined: Oct 2004
From: Kuala Lumpur


QUOTE(Area51SE @ Jan 4 2012, 06:49 PM)
Guys, What brand  of rims is recommended if i were to buy 15' rims ?
*
All about budget man!!!
What is your budget? smile.gif
canho
post Jan 13 2012, 09:46 AM

Getting Started
**
Junior Member
103 posts

Joined: Oct 2004
From: Kuala Lumpur


QUOTE(Aj6009 @ Jan 13 2012, 09:21 AM)
Yahoo...today already 1000KM ........push to the max....push to the max !!!!
*
If your right leg can Tahan Sikit, try push to the limit after second service which mean 6000km.
Engine still new and still a lot of need time for run in. smile.gif

This post has been edited by canho: Jan 13 2012, 09:47 AM
canho
post Jan 16 2012, 09:18 AM

Getting Started
**
Junior Member
103 posts

Joined: Oct 2004
From: Kuala Lumpur


QUOTE(tom@nec.ap @ Jan 16 2012, 02:17 AM)
I just book my car will be getting my 1.5se silver in 3 days time ! but feel a bit dissapointed cause cannot get my lucky number.
*
congrats on you 1.5SE... are you paying for a numbers?
canho
post Jan 16 2012, 01:20 PM

Getting Started
**
Junior Member
103 posts

Joined: Oct 2004
From: Kuala Lumpur


QUOTE(tom@nec.ap @ Jan 16 2012, 11:43 AM)
Can Ho ,
yup paying for my new numbers for rm 310 ! number is 8330
*
you paying for Rm310 but you get nothing? that's was weird


Added on January 16, 2012, 1:22 pm
QUOTE(matmoto5125 @ Jan 16 2012, 12:44 PM)
Anyone knows what's 1.5 SE original rim's jj? 6.5? 7? The bigger the number, the wider, right?
*
SE original wheels is 14x5j if not misstaken, yes... number bigger getting wider!!!

This post has been edited by canho: Jan 16 2012, 01:22 PM
canho
post Jan 16 2012, 05:39 PM

Getting Started
**
Junior Member
103 posts

Joined: Oct 2004
From: Kuala Lumpur


QUOTE(ikiey @ Jan 16 2012, 05:38 PM)
Urs new myvi or the previous model...??
*
Oh yah.... any ideal new myvi front brake pad share with any others car ?
canho
post Jan 17 2012, 09:40 AM

Getting Started
**
Junior Member
103 posts

Joined: Oct 2004
From: Kuala Lumpur


QUOTE(matmoto5125 @ Jan 17 2012, 09:35 AM)
Which one is it? rclxub.gif
*
my information get from here....
http://www.mudah.my/Sport+Rim+14+Inci+seco...RU-12874540.htm
donno it's right but if not misstaken when i take out the my stock wheel is write 14x5j smile.gif

This post has been edited by canho: Jan 17 2012, 09:40 AM

2 Pages  1 2 >Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0205sec    0.51    7 queries    GZIP Disabled
Time is now: 11th December 2025 - 09:24 AM