Outline ·
[ Standard ] ·
Linear+
AMD X2 Overclock, will this help?
|
ahpaul82
|
Feb 14 2006, 02:03 AM
|
|
Is it a bit late to play X2 now ? Initial testing for my AMD64 X2 3800+ : ======================================== Short description: CPU: 240x10 @ 2400Mhz, 1.25v+113% RAM: DDR480, CL2.5-4-3-7-1T @ 2.8V ======================================== AMD64 X2 3800+ Manchester E4 CDBHE 0533SPDW @ 2400MHz (240HTTx10) 1.25v+113% stock cooling 2 x 512MB Corsair TwinX XMS PC3200 PRO v1.4, 240MHz at 2.5-4-3-7, 1T, 2.8vdimm, Orange Slot DFI LanPartyUT NF4 SLI-D (BIOS 704-2BTA) 1.6v chipset Galaxy 6600GT (Zalman) PCI-E x16 (default speed) WD 40GB 8MB - IDE1 ASUS 52X CD-ROM - IDE2 WD 160GB SATAI - SATA3 Samsung Floppy Drive OCZ ModStream 520W PSU Window XP Pro SP2
|
|
|
|
|
|
ahpaul82
|
Apr 30 2006, 09:34 PM
|
|
My new stepping of X2 3800+ :  Link over here > AMD64 X2 3800+Prime/SP2004GO screenshot will post up soon
|
|
|
|
|
|
ahpaul82
|
Apr 30 2006, 11:54 PM
|
|
My test bed : AMD64 X2 3800+ Manchester E4 LDBFE 0607TPMW @ 2800MHz (280HTTx10) 1.35v x 113% =1.526v CoolerMaster Aquagate Mini R120 2 x 512MB Kingston Value RAM DT-D43 DDR400 @ ddr466, 2.5-3-3-7,1T, 2.8vdimm, Orange slots. DFI LanPartyUT NF4 SLI-D (BIOS 704-2BTA) 1.6v chipset Galaxy 6600GT (Zalman) 128MB PCI-E x16 (default speed) WD 40GB 8MB - IDE1 TDK 52X32X52X CDRW - IDE2 WD 160GB SATAI - SATA3 Samsung Floppy Drive Chaintech VA-710 Sound Card OCZ ModStream 520W PSU Window XP Pro SP2wanna see 3G sceeenshot ? haha.. AMD64 X2 3800+ @ 3GHz screenshot My previous X2 3800+ need >1.6v only able to do 2.6G... this babe realy didn't disappointed me. week06xx realy GOOD~ More result you can refer Xtremesystems forum. same stepping with WC can do more higher  In fact i still finding a best memory timing for my DT-D43 now. and, X2 is Hotttttttttttttt This post has been edited by ahpaul82: May 4 2006, 01:03 AM
|
|
|
|
|
|
ahpaul82
|
May 16 2006, 11:43 AM
|
|
Just got 2x1GB Kingston ValueRAM UCCC chips and test, here is the result : This post has been edited by ahpaul82: May 16 2006, 11:44 AM
|
|
|
|
|
|
ahpaul82
|
May 16 2006, 08:29 PM
|
|
QUOTE(soulfly @ May 16 2006, 05:23 PM) when you switch from D43 to UCCC.... is there any change in cpu voltage? remain same, 1.35v x 113%. whY ?
|
|
|
|
|
|
ahpaul82
|
Jun 1 2006, 11:28 AM
|
|
Soufly you are right~ after few days use Folding to purposely burn in the Core0, (Core0 alwaz fail first) finally it can do 2700MHz with 1.413v ~   looks like my Manchester X2 3800+ love the Samsung UCCC a lot ~ wonder <1.4v can do 2700MHz or not leh... This post has been edited by ahpaul82: Jun 1 2006, 11:38 AM
|
|
|
|
|