Closed
This post has been edited by Funded88: Sep 23 2012, 11:27 AM
Closed
|
|
 Dec 20 2011, 05:13 PM, updated 14y ago
Show posts by this member only | Post
#1
|
 
Junior Member
11 posts Joined: Dec 2010  
|
|
Quote|
|
|
|
|
Dec 20 2011, 05:49 PM
Show posts by this member only | Post
#2
|
Senior Member
1,894 posts Joined: Jul 2011 From: Heaven in Hell
|
Q1 > 2 3pin to 1molex
Q2 > if im not mistaken, is not same~ but u cant use push pull for H100 on 400r~ if u wan P/P, u need to mount the top fan outside of the case~ btw~ U CAN FIND IN GOOGLE OR YOUTUBE  http://www.youtube.com/watch?v=S-u7FdeLSMI http://www.youtube.com/watch?v=OCmnKpWB7ek This post has been edited by 1qaz1qaz: Dec 20 2011, 05:50 PM |
|
|
Dec 20 2011, 09:31 PM
Show posts by this member only | Post
#3
|
Senior Member
2,640 posts Joined: Sep 2010 From: Kuala Lumpur.  
|
QUOTE(Funded88 @ Dec 20 2011, 05:13 PM) QUESTION 1: can anyone tell me what connector the provided fan of 400r's connectors is? i quite sure the rear 120mm fan is normal fan connector.. but the 2x 120mm fan on the front is connected through 4pin molex connector? if it is 1 molex per fan or two molex for two fans. can't found on google. 1) Its 3 pin and a molex converter will be provided.QUESTION 2: Can I plug the rear fan into h100 pump unit along with two fans with the h100.. are the fans same?   2)Yes,you can add it to the H100 kit. They both are using 120mm fans. |
|
|
Dec 21 2011, 12:23 AM
Show posts by this member only | Post
#4
|
|
Junior Member
11 posts Joined: Dec 2010
|
QUOTE(Source96 @ Dec 20 2011, 09:31 PM) 1) Its 3 pin and a molex converter will be provided. thanks for information.. it will work fine with the fan controller along with the h100 pump unit? they are same fan? 2)Yes,you can add it to the H100 kit. They both are using 120mm fans.  |
|
|
Dec 21 2011, 05:11 PM
Show posts by this member only | Post
#5
|
|
Senior Member
2,640 posts Joined: Sep 2010 From: Kuala Lumpur.
|
QUOTE(Funded88 @ Dec 21 2011, 12:23 AM) thanks for information.. it will work fine with the fan controller along with the h100 pump unit? they are same fan? As long your extra fans are using 3 pin,no worries.It'll work. |
|
|
Jan 17 2012, 11:20 PM
Show posts by this member only | Post
#6
|
Junior Member
69 posts Joined: Jan 2011
|
that right.. use some extra fan.. make air flow through them..
 my dekstop use 5 big fan.. |
|
Topic ClosedOptions
|
| Change to: |  0.0179sec
 0.44
 5 queries
 GZIP Disabled
Time is now: 20th December 2025 - 02:50 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.