That would be 704-2BTA bios or the newest beta bios. Will work on orange slots, yellow i don't know

The main timming CAS plays its role alot in this ram for Oc'ing so just remember to tweak the CAS if you can't oc futher...the best thing about this ram is that if it boots+memtest past a few rounds(test 5) it will be stable if it doesn't then it will not pass POST or load windows, just tweaker with the main timming...the other timming has less effect but play around it to know whats best with this ram.

This post has been edited by DaBaD: Apr 22 2006, 01:43 AM

That would depend on luck actually since they are rated at ddr400 (200fsb) so going futher then that would really depend on the chip's bin that u got and luck

I had a chance to OC these ram for a friend and they turned out pretty good where it reached ddr500 (250fsb) at 3-3-2-0, better then UCCC at this timming...further then that i dunno since the ram was taken away by it's owner

This post has been edited by DaBaD: Apr 22 2006, 02:16 AM

Guys why not try different dividers for the rams at high fsb for the opties....
For me when using TCCD divider 133 gives me alot of problems...memtest ok, superpi 32m ok but prime failed, when changed to divider 150 prime passed

But for BH-5 it was ok to use divider 133, so i think that you guys must try what your ram+opty best divider is, i know it sounds abit whacky but on my system this is what happens...

Another tip is to up your Max Asyn and Read Preamble when using high fsb for the opties...try reading at DFI street about this

Link -> http://www.dfi-street.com/forum/showthread...eron+unofficial

Here's my lastest oc on Opty 144

Waaa....i was also going to try and under volt my opty...hmmm,maybe i'll give it a try later

Tunjuk ler power skit nanti

But still there are dual cores that can reach 3.0ghz...but of course its very rare

Any good single core stepping? CABYNE?


Try asking to make a bulk for dualcore good steppings

CAB1E
but different week from dinster's new stepping



This post has been edited by DaBaD: May 24 2006, 10:46 PM

CAB1E can be said rare stepping mine is 0604,but to get 3.0ghz prime stable the jump is to 1.52v
Hopefully with some burnin can reduce the voltage...
Dinster's new stepping is really good+rocks
Those that are in that bulk are really lucky

Different stepping la bro
No two opty's are the same................................except from the same stepping+week

This post has been edited by DaBaD: May 25 2006, 08:26 AM

Nope, sold it to a friend who got his opty Toasted!!!

Currently got the GskillFX TCCD but the OCZ is with me on loan for testing