Try 3ghz see how it goes.

Impressive clocks there.

230C is a wrong reading from SmartGuardian anyway. DI is too cold.

3Ghz on air not a problem.

Not really much based on facts, but more onto assumptions. Hardly I can see E6 can overclocks that well like E3 does. I might be wrong on that. Yea, E6 has better memory controller. So in its default clock speed, it still performs better than E3.

This post has been edited by Hyde`fK: Jan 27 2006, 07:47 PM

Haha yea, most people skip E6 batch, so less results are being compared.

This post has been edited by Hyde`fK: Jan 27 2006, 10:29 PM

Eh, wait AM2 released first then consider either AM2 or Conroe mar.

@ikan_semilang
Your FSB is very low.

@fantasy_kenny
Very few Opties have unlock multiplier. If you're lucky to get one that is.

This post has been edited by Hyde`fK: May 4 2006, 08:47 PM

@ikan_semilang
No lar, can try out 200FSB can give a lower multiplier value see see how it does.

@fantasy_kenny
Yea, Opty roxor!

1.6v is considering high for Opty. 1.79v... speechless.....

This post has been edited by Hyde`fK: May 6 2006, 11:28 AM

@ikan_semilang

You might wanna try that.

Just to make your life easy. No need so mafan go through the whole thread.

Thanks dude.

http://forum.lowyat.net/index.php?showtopic=242290

See the first ranking.

@arj
Can ask tAmp0i about it.

Try 1.45 + 107% vcore.

1.425v + 110% then

Wow...

Could be the heat that limits your proc. Yea, get a better cooling first.

Your picture is so small to see.


EDIT : Removed the "_thumb" to see the full size.

This post has been edited by Hyde`fK: May 13 2006, 02:02 AM

Sometimes SP2004 runs fine but not SuperPI, and vice versa. Don't really know which to believe.

Hmm I see, normally my way to test stablility is to run 2 copies of SP2004 for hours too.

Faster operating speed cause of the larger lvl2 cache. Lower temperature and lower power consumption.