Hi! My house is under renovation and almost complete but my contractor just found that 3 pcs of my bath door has been spoilted. May I know where I can find cheap and durable PVC door?

Thanks

Just order from the nearest shop, they won't be expensive anyway

what do u mean? hardware shop?

cost should be around rm 80 - 120

Installation is included?

Nope! Better DIY or ask your contractor to install it...

Yes nearest hardware shop. Get your contractor to install it since he's still working on your house.

unlike timber doors, u need blind rivets to install the hinges and latches or locks on pvc doors

I went to 2 hardware shop just now but 1 hardware shop said they didnt supply and another 1 said they only have standard size dont have custom made. Because according to my contractor, bathroom door normally is not standard size. Any recommendation?

usually PVC door comes standard in size 30" x 72" (IINM la...)

however, this can be adjusted easily by taking off the sides (take off the rivets) and adjust accordingly (if u need it slightly bigger), or cut (if you want smaller)

with this, u can add 1 - 2" max, or reduce to whatever size you want

of course at most you can get is 32" wide, wider than that, then consider buying waterproof timber doors - less hassle than custom order from factory

Can your contractor give you the size before you go and buy?

Agreed with ozak, ask your contractor to give you the measurements. I went around to check on pvc doors also. Got 2 type. 1 type is the fold type, the other type is a whole leaf like wooden door. My contractor said those are very nipis pvc. He said he can help me to order custom made, thicker pvc door with lock etc... cost around 280-300 per door include installation. I am still waiting to see how it looks like. Hope no regret.

I don't like bifold door but it is nice more expensive of course.

This post has been edited by Skydrop: Dec 4 2011, 09:16 PM

According to my contractor, custom made pvc door with lock is thicker than those standard pvc door selling at hardware shop. Custom made pvc door about RM250 per door. I need check with him again tomorrow.

I ordered my PCV doors from the same shop I got all my other doors from. Apparently, thicker PVC material, and cost RM250 per door including installation with 3 stainless steel hinges and the door knob.

I'm quite pleased with it.

Can I know where u bought it?

A shop in SS2, Setia Venture, No. 9, SS 2/30.

Tq bro