…and Water Cover, too.

Vengeance C70 is also outfitted for liquid cooling upgradeability. You get 240mm radiator compatibility on top of the case, and if that’s not enough, you can remove the lower hard drive cage to fit a second 240mm radiator for a dual-loop setup.

This casing is Corsair's answer to the ultimate Cooler Master 692A.

The C70 does a few thing better than the 692A at additional cost:

1) Accommodates 1 x 240mm x 60mm thick radiator in the bottom compartment with the bottom hdd cage removed. This is similar to the 692A but WAIT!

2) Accommodates 3 hdds AFTER removing the bottom bay. The 692A can only support 2 x hdd bays. With the C70, you can get a 2 x 2.5" to 3.5" bracket and mount 2 x ssd for a raid 0 setup, and still have 2 additional bays to do a raid 0 with mechanical hdd for storage. With the 692A, you can only do 2 x SSD + 1 HDD, or 2 x HDD. There is a work around for this limitation....mount the SSD in the 5.25" bay.

3) Accommodates 1 x 240mm x 35mm thick radiator on the roof of the casing. Again, similar to the 692A.

4) Hard powder coating finish on external frame. Full metal casing (felt that way in person). 692A is plastic + Metal.

5) RM180 more than CM 692A <----Ouch.

Thus explain why those normal fan screws can't fit properly ...
@legend86, could you ask Corsair regarding this? Even mine does not come with those screws

You're not sacrificing anything since that is the place where you supposed to put 240mm rad. You also can put 240mm radiator at the front if you're willing to sacrifice the HDD bays.

Probably won't clear the mobo

actually im thinking, the radiator below can still put 140mm*2 and top put 120mm*2 with filter

Probably won't clear the mobo

what you mean by that

Basically, the 240mm rad will be inside the casing (at the top) while the two 120mm fans at the top under the filter. You can't put the fans inside the casing too because it will block by motherboard.

what if i put at top and do not want to cover with the mesh that been provided?

Yes you can do like that too. If you're going to setup push/pull configuration (four fans on both side of the radiator), the ideal way is to make sure all four fans have the exact RPM. Of course it is difficult to get ideal setup, so, examine all four fans & the two weaker fans, you use them for pull fans.

Thus explain why those normal fan screws can't fit properly ...
@legend86, could you ask Corsair regarding this? Even mine does not come with those screws

Hi lacus, kindly send me the pic of the screw or the case screw hole? I need evidence to proof to corsair.. Tq

hey bro~
r u from malaysia corsair??

---

Added on June 25, 2012, 9:11 amwondering how will it cost when reach malaysia?? anyone hv idea how much will it cost???

he is one of the worker and dealer from kl plaza near lowyat, if i not mistaken

LOL.. nope.. im not worker or dealer from lowyat or watever.. 
U no need to know my identity.. i will help u guys to solve every problems regarding corsair.. right Cyntrix?