can the 3930k takes up more than 1.5v? and how high can the temp 3930k handle?

wats ur temp when u oc it at 1.5v??...waiting for new budget for wc then..hehehe

where to get that mobo..hahaha..that one nicer than mine...which is better..or both are the same between that and rive?

This post has been edited by marsha1l: Dec 7 2011, 05:13 PM

to achieve that 5ghz...is it necessary to wc the mobo too?..or the cpu only should sufficient?

cheh..but seeing u wet ur mobo make me ...slowly upgrade then...now trying the entry kit xspc rx240..

owikh..do ram affects the maximum oc u can achieve on cpu?

btw..did u manage to get ur temp?

i manage to get 5ghz@1.49v setting but seems nt stable..

1) the error that occur at bsod is non related with oc..
such as 0xbe 0xc3 0x9c and 0x7e this error does nt indicate that i need to add vcore or vtt/qpi or ram timing..

so does this shows that i cant go for 5ghz?

again with question...its look like the chances for me to boot up on 5ghz are high if i let the processor rest..

so ive come up with this conclusion..

lower temp processor gives u higher success rate on lower volt per ghz?

owi really really rich one eh..buy many to find golden cpu..hehe

anyway i think im too early to enter this enthusiast league...expensive and distracting me from studying..always try oc-ing..

and i reach 5.1ghz but cant reach 5.0...5.1ghz@1.5v with idle temp @68 avrge using noctua..cant run any bench...temp go above 85c+ after 10 second on cinebench

IBT stands for?

5.1 can..wait till i get my wc..should be by this week..then ill try for 5ghz

so anything u want to conclude from the msi mobo?

the color looks nice though..

i thought im the only one who facing the sloww boot time

puas google kat internet..hahaha

make review on the asrock x79 mobo?

x79 extreme 7

Gigabyte smoking issue..to all x79 giga mobo user

just an info

bro owikh..1005 link broken??

sry to ask it here..besides the mobo block from koolance or ek..is there any other product?..ek one looks ugly..

my bad..sryy..btw out of curiosity..

what factor could make ur processor lifespan decrease?

is it heat or the voltage being supply to it?i mean 2011 by right should withstand better than the normal sb-E? since nowdays i often do video rendering and setting up my proc to 5ghz @1.48 ..kinda worried about the lifespan of the processor..

second is my x79 temp is at 41-43c on 5ghz full load..is it safe? currently just blowing the heat sink..

thx for the tips...will do more reading before upgrading my wc setup..

*pm me if ur mobo block available