Special edition=Milk edition (minus different base label)

Commanders and troopers may involve HT.... but not prominent...

T-1000, T-800, Sarah Connor is by using sideshows license but fully produced by HT.... just like Luke Bespin ...

Hence:

using SSC's license...

The (prominent SSC logo at bottom right corner):


This post has been edited by BeastX: Nov 30 2011, 03:56 PM

To owners of TTM19. Do you see a big seam-line at the right side of the body, as shown by Indy's body(below), if so it another drop in HT's production, or Indy's is an alternate torso.:

Not the arrow on the elbow hole.... I use "kui lo"'s pic (his problem can be solved easily: dremel).... The seam on the right side of the body (present on Indy, Whiplash/T-800/BarneyRoss/BL) but not present on Royce/Dastan/Comedian/Wolverine.

I suppose, TTM19 body = Indy's body or = Wolverine's body.....

This post has been edited by BeastX: Nov 30 2011, 04:17 PM

That actually have mold lines (reduced though)... not seams per say....

Not really, A whole body piece casting (silicon) requires a 2 piece mold... the mold will create "flash"es at the joining of the 2 piece mold.... It's a fact of casting/molding plastic/pvc/silicon.... it could be reduced by using perfect non-defective (microscopic exact smooth) molds.

---

Added on November 30, 2011, 4:32 pmIf you are referring to the seam on Indy body... (Maybe) HT has changed from a one complete piece (Wolverine) to a partial jointed piece (Indy)... Good to 'not so good'.

This post has been edited by BeastX: Nov 30 2011, 04:32 PM

more...

Do tell any seams on the right side of the rubber torso (like Indy's pic below).... I've 1 dozen bodies coming... see whether it's worth it for more...

The crack just above the bend of his thumb. Thanks in advance.

This post has been edited by BeastX: Nov 30 2011, 05:11 PM

Yes, but on Wolverine/Royce/Comedian/Dastan it's "seamless"... it "was" an advantage of the body

This post has been edited by BeastX: Nov 30 2011, 05:21 PM

Mk. 5.....

Or 10k yen on Amiami that may have more available in the future... more was brought in after sold out for 2x...

one was going for 8.6k... still not cheap enough to me...

p.s. just paid for my 10th build of Mk. 5.

This post has been edited by BeastX: Dec 4 2011, 12:09 PM

^Something nice on BD body of DX04.... sweat effects

A case of more supply than demand.

All better for me to build my mobile armour army (Mk. 5) ... numbering @ 10 currently.

p.s. right arms are mighty expensive...

This post has been edited by BeastX: Dec 6 2011, 05:12 PM

Well, no amount of Mk. 5s can match one HULK...

Available in HK now is Milk/Special edition WM

My pics from toy-hunter hk today:


The Alien is made of transluscent brown plastic

Tracker/Alice/New Goblin/Mk. 5/DX05.... still available.

Avatar, DX08, DX09 are MIA from display...

This post has been edited by BeastX: Dec 9 2011, 11:39 PM

Hot Stuff, Edation seamless female body review

Overall body:
- The mould lines are present though not as obvious in real-life.
- There are at least 2 observed types of properties of the silicon, very soft squishy breasts and the rest of the body of tougher/harder silicon.
- The body/flesh is thick mimicking body flesh folding.
- The joints are kind of weak/fragile (more on this later) to resist the silicon rubber.
- Nice body sculpt, better definition of the arms, butt, abs/rib cage and the lower legs might make it better.

Neck:
- Cool girl, neck post (top) joint.
- Base of neck articulation, as shown in the pics (below), forward/backward/side.


Arms:
- Wired fingers
- Forearm rotation is (what I presume) is near the wrist region.
- Wrist only allows up/down motion, no sides movement.
- Elbow bending have enough range in them, at least 120 degrees.
- Bending of the elbows does not cause folding of the silicon (elbow point) to look natural, HT's Sarah Connor/Abigail Whistler looks more natural.
- Upper arms have rotation in them.

Shoulders:
- You cannot bring the arms too close to the side of the body, it'll splay out some-what.
- Raising the arms will cause the silicone to fold unnaturally @ the shoulders, though it's better implemented than Phicen's version.
- Static position (I believe) no up/down.. forward/backward motion (movement of shoulders' position in relation to the body).

Abdomen:
- Forward/backward... side crunch and rotation. The pic below (right) shows and example of side crunch and rotating to the left combo.
- ^Great range, I believe it's the best (good) possible implementation.

Hips/leg:
- The most I dare to bend to its limit (I believe) is @ 90 degrees to the body (pic below left), which is a good sitting position.
- The hips' joints are weak/fragile: The silicon rubber offers to much resistance against the bending of the joints
- I may have damage/broke the right hip of my copy, as after to 2 initial bending as with the left leg it no longer offers resistance capability for forward/backward motion.
- The inner thighs have the ability for twisting.
- Knees bending have good enough range and look al-right bent.

Feet/Ankles:
- Articulated/wired toes.
- Down/upward motion , twisting motion and side motion.
- Great range almost humanly possible.

Things Edation can improve on:
- Most important, stronger and more robust joints.
- More shoulder articulation.
- Side bending of the hand/wrist.
- Might be asking too much on a seamless body (as even jointer body can hardly achieve this)... the ability to bend the thighs higher/closer to the body/chest.
- ^Maybe use for the entire body of the squishy silicon of the breast (may solve some of the above issues).


NSFW pic... regarding body articulation




pics attachments:


This post has been edited by BeastX: Dec 13 2011, 09:57 AM