Just won myself a lucky draw

Wow high end distilled water - Spritzer. We use Giant brand only

not confident with giant, lolx.
Spritzer RM2.3 one litre. lolx

EK D5 Dual Top
I can see the coolant inside ur res is not calm anymore.

i just clean the route including the HF block. Found one plastic hair long stuck on the W.B, lolx.

indeed, this new EK reservoir got alot of plastic hair leftover from factory especially at the thread. Internal surface is rough.

Bitspower reservoir is clean and smooth internal and externally.

my D5 dual top single loop.... using apogee HD to split into 2 loop... both loop also got 200 little per hours

looking for flow meter with LCD, any intro?

koolance FM17N interested ? i got one spare. but no lcd

nice. how to use? pm me the price. lolx

change the connector into 3pin fan header . plug in to mobo fan slot, by reading the rpm divide by the calibrate value to get the actual flow.
for me, i plug into aquaero 5. everything is auto
check ur pm.

This post has been edited by pennykia: Dec 29 2011, 06:30 PM

wow... all here nice rig and water cooling....

hope 1 day can build nice Water Cooling System inside my rig ....

i have few question , but i dono this is right place to ask or not -.-''
going get buy some part to do Water Cooling in my Rig...

but i want ask opinion the user here.....
between this CPU Block.... which one okie in my budjet ??(RM300 below *CPU BLOCK ONLY)...

should get :-

Swiftech Apogee XT

or

xspc Raystorm ???

If you are comparing between those two, it would be Raystorm.

Whichever looks better to you ekwb is still one of the top choices. If you were to start with a kit, don't even bother changing until you find out how high ur oc can go.

A lot of the time wc beyond a certain level is all cosmetics, the actual difference in temp maybe 1-2 and your ambient would play a bigger role.

spending RM1k on radiator or WB, a small RM8xx aircon for better ambient temperature will give u better results. :lolx

Apparently the backplate for Raystorm for LGA2011 is not compatible with RivE because the CPU backplate is bigger.. Need to order the fix from XSPC. Just a heads up for anyone considering to get Raystorm for their RivE.

Afaik raystorm doesnt come with 2011 mounting bracket so u hv to use the provided 1366 bracket and x-socket provided by rive.

Just use the 1366 bracket as owikh suggested. The cons of using the 1366 bracket is that you do not get the spring loaded frame to clamp down the cpu. So if the block was not installed properly you may get error 66 when you boot up the PC (something we encountered once )

new danger block: link



they said they gave some blocks free for those who requested on their facebook...

still can compete with raystorm intern of flow...

This post has been edited by Alexes: Dec 30 2011, 06:57 PM

Even with the 1366 socket + x-socket the cpu backplate of rive is in the way. Maybe I am missing something here. Googled about it last night and it seems that it was an issue and XSPC provides a fix...

swiftech 655 is 12v or 24v? i found something new on the label, 24v. lolx