Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

Unifi Official TM UniFi High Speed Broadband Thread V13, FREE Installation & 1-month subscription

views
     
jolmy
post Dec 16 2011, 06:53 AM

Meow
******
Senior Member
1,182 posts

Joined: Jan 2003


I am a TM UniFi High-Speed Broadband VIP5 package subscriber since March 2011. As I am staying at a high-rise building, the TM UniFi service is provisioned to my premise using VDSL (copper) instead of using fiber optics. Ever since one month after I started using TM UniFi, I have been facing two major issues with the service of which one has been completely resolved while another has been happening up till this very day I am writing this letter!

Between April and July 2011, I had been experiencing disconnection where the DSL indicator on the VDSL modem blinked and reconnected itself. This happened randomly a few times a day. After numerous technician visits where they replaced my VDSL modem and changed the port, the problem was finally resolved in July 2011.

However, since May 2011, I have been experiencing what I call the "Upload Speed Syndrome" randomly where my upload speed drops till near zero. This happens randomly almost on a daily basis and at certain times, it happens at about the same time daily! At other times, the problem resolved by itself only to recur after a few days to a couple of weeks! Whenever this problem occurs, my upload speed drops till near zero where a speed test performed would either results in an "Upload Test Error" message or an extremely slow speed of 0.01Mbps! Performing a ping to a locally-hosted web server will even exhibit random packet losses! However, there is nothing wrong with the download speed as in most cases, my download speed is at least 90% of the advertised bandwidth.

For this problem, I have actually lost count how many reports I have lodged to TM UniFi Center! Each time a report is lodged, a technician is sent over where they did all they can such as replacing my modem as well as changed the port and slot card. However, none of these resolved my problem. It has to be noted that my problem does not occur 24 hours a day, 7 days a week, but occurs randomly. As a result, each time the technician came, there was no problem and therefore the technician could not detect at all the cause! If none of what the technician did could resolve my problem, there is definitely some other possible issues causing the problem I am facing, for example, user bandwidth management configuration or networking switching issues! It is very likely this is a network switching issue as I have discovered neighbors who also faced the same problem as myself, but none of them wants to take the trouble of lodging a report to TM UniFi Center.

Initially, TM UniFi Center would make a call to me to verify if the problem is resolved before closing my report. After a few problem-free days, the report would be closed, only to recur later on! However, recently, TM UniFi Center would NOT even call to verify, and they proceed to close my report without verifying that my problem is resolved!

One TM UniFi customer support personnel even insisted that it is only the download speed that is important and NOT the upload speed! How wrong could she be? It looks like many of the TM UniFi customer support personnel are not well-equipped with basic networking knowledge and little did she know that she was speaking to a person like me who has background in networking! In simple language, even for a simple usage of accessing a website, the web browser needs to send a request to the web server via the Up-Link. The web server will then respond to the request by sending the requested file whereby the web browser receives the file via the Down-Link. The near zero upload speed affects the Up-Link, which made it nearly impossible for the web browser to send a request to the web server, thereby causing the Internet service unusable despite having a good download speed (Down-Link)!

The customer support personnel should also know that in many Internet applications today, both the download and upload speeds are extremely important. Today, not only most casual Internet users are just consumer of data, but also producer. With social networking applications such as Facebook, users need good upload speeds to upload photos and video. However, with near zero upload speed, the uploading of photos and video will just not work at all as it will time-out and the uploading fails! Even to attach a file to an email will fail due to this problem! What's the use of advertising the UniFi service of having symmetrical download and upload speeds if they cannot even ensure even at best effort, customers should get at least 80% of the advertised bandwidth?

Ever since I faced this problem, I have to resort to use an alternative mobile broadband service from YTL at a cost! However, I have been paying my TM UniFi bills in full promptly all this while. Yet, there is no compensation in the form of a rebate for the never-ending problems I am facing! Will the personnel at TM UniFi please take note of this issue and resolve it once and for all, and consider providing me with rebate on my bills? I have been even thinking of considering subscribing to other high-speed broadband providers when the service is available, but I am currently tied up with a 24-month contract with TM UniFi! I would believe the problem I am facing is a result of TM's monopoly of the high-speed broadband business!
jolmy
post Dec 24 2011, 07:37 PM

Meow
******
Senior Member
1,182 posts

Joined: Jan 2003


QUOTE(karhoe @ Dec 24 2011, 01:49 PM)
I am currently using Streamyx Blockbuster package 1Mbps.

I am interested to switch to Unify but I am told that I cannot keep my existing number and will be given a new number.

That is difficult for me because many of my old relatives only know my existing fixed line number. Besides that I also make alot of calls on my existing telephone number.

Will it be possible for me to get Unify but the free fixed line calls and 10sen calls to mobile line rate is maintained on my existing telephone number?
*
You can keep your existing fixed line phone, and even Streamyx if you wish.

BUT, if you stay in a condo/apartment where there is only ONE copper pair wire into your unit, then you must terminate both Streamyx & fixed line phone as your UniFi is provisioned via the copper wire.
jolmy
post Dec 30 2011, 12:39 AM

Meow
******
Senior Member
1,182 posts

Joined: Jan 2003


QUOTE(kokifung @ Dec 30 2011, 12:35 AM)
hi there,

guys i need some help/opinions..

recently my unifi, vip5 really slow, i did complaint and gave me a report number, the technician came to my house.. the thing is it seem nothing is been changed.. connection still slow, totally unstable..

after 24hours, pc wireless connection super weird, appear limited connections, not connected..etc etc..

then today i can on9, but slow..

extra info...

using unifi quite some time edi, just the problem happen within 1 week edi..

appear like modem problem the orange white color..
can anyone give me advise what should i do??

maybe change the wireless dongle or something?? as i using D-link usb wireless dongle...
not the unifi stock wan..
*
Do a Ping Test & Speed Test. Make sure you choose a Server based in Malaysia. What are the results?

Also do a ping to your default gateway (router IP). In average how many milliseconds?
jolmy
post Dec 30 2011, 10:07 AM

Meow
******
Senior Member
1,182 posts

Joined: Jan 2003


QUOTE(gHuLzEr @ Dec 30 2011, 10:03 AM)
I heard from a guy at Sri Computers today that if you purchase a WR1043ND from LY, you can just bring it up to TP-Link Service center on 4th Floor and they can flash custom firmware for Unifi. Can anyone confirm this and does it work?
*
If you know what you are doing, you can flash it yourself too.
jolmy
post Dec 31 2011, 08:26 PM

Meow
******
Senior Member
1,182 posts

Joined: Jan 2003


QUOTE(igor_is300 @ Dec 31 2011, 01:08 AM)
Dear all,

I just installed my unifi today, kinda happy with the local speed except I was a bit shakehead when the TM installer told me it's ok to stack the alcatel fibre modem with the Dlink router since I have some space constraint. At first it was ok, until a few hours later (more than 8 hours I think) it got quite hot. Luckily I realised this and unstacked it and put it side by side.

So guys, is there any problem for the unifi modem to generate such heat ?
*
For those using VDSL (copper), if you are using the Huawei (black modem), that device heats up quite fast that I had to put it on top of notebook cooler fan! But last month TM guys changed mine to the ZTE which is standing type & has many ventilation holes, and no overheating problem with that.

Not sure about those using the Alcatel fiber BTU. If it does overheat fast enough, you might just have to make more space for it and consider place it on top of notebook cooler fan.
jolmy
post Jan 13 2012, 06:27 PM

Meow
******
Senior Member
1,182 posts

Joined: Jan 2003


QUOTE(ekudz @ Jan 13 2012, 06:12 PM)
got unifi installation next week on saturday but im working .. ask UNIFI to come on Sunday they said cant .. only weekdays or saturday ...

then how? im working .. cant take leave due to lot of work .. if installation only 1-2 hours maybe can lari kejap la.. but installation more than that ...

Damm!!
*
Are you staying at landed house or high-rise condominium?
jolmy
post Jan 13 2012, 11:01 PM

Meow
******
Senior Member
1,182 posts

Joined: Jan 2003


QUOTE(ckboon @ Jan 13 2012, 05:14 PM)
best practice is to choose channel 1,6,11

those unwritten channel will overlap with each other..

this is a standard for wireless networking

smile.gif
*
Problem is if you stay in a high-rise apartment/condo, you'll have many neighboring hotspots also on 1,6,11. And out of no choice, I have to choose a channel which is least used, although it does overlap with others, but at least, it works. In my case, I am on Channel 4.

This post has been edited by jolmy: Jan 13 2012, 11:03 PM

Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0449sec    1.57    7 queries    GZIP Disabled
Time is now: 30th November 2025 - 10:39 PM