Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
3 Pages  1 2 3 >Bottom

Outline · [ Standard ] · Linear+

Unifi Official TM UniFi High Speed Broadband Thread V13, FREE Installation & 1-month subscription

views
     
ckboon
post Dec 1 2011, 05:26 PM

Casual
***
Junior Member
458 posts

Joined: Nov 2004

QUOTE(muslayer @ Dec 1 2011, 05:17 PM)
Sien...1 month free full package of ipTV expire liao..now left with basic iptv from hyppTv only. Sien liao
*
useless la...

i never watch it also even get full package free for 1 month

lol
ckboon
post Dec 29 2011, 11:16 AM

Casual
***
Junior Member
458 posts

Joined: Nov 2004

QUOTE(debbierowe @ Dec 29 2011, 08:50 AM)
hi all.. am leaving home for 3 days. i forgot to switch off the BTU & Router...

is it gonna be ok?
*
mine had been on for more than 4 months!
no worry
ckboon
post Dec 30 2011, 11:04 AM

Casual
***
Junior Member
458 posts

Joined: Nov 2004

QUOTE(Sadru @ Dec 30 2011, 10:46 AM)
Guys, i have some inquiries about unifi here:

1. we must pay for 2 month first during the activation fees right? example vip5 which is rm150 per month so must prepared rm300.
2. extra charges that we not known of after while installing the unify. for installment at house it free as stated in promotion right?
3. i live in apartment in first floor. * the apartment have 4 top floor, what status am i in? any other extra charges?
4. would i receive an television channel? it it free? plan to quit astro and move on tho these channel provided with the Unifi.
5. how long would it take before i have the access to the internet via unify?

* i really need to know more about the no.2 and no.3, in fact i once heard a case which the unify charges him rm700 on the first bill. * vip5.. really need more info about it since i do not have the luxury to spend a whopping rm700 for the installment alone ;(
*
1. I am not sure is the free 1 month still valid or not. For my case, i paid only RM149 on the first bill, since I am on the 1 month free promotion.

2. Extra charges? They only only charge you extra if u asked them to do extra job, such as conseal cable, or they are pulling the fiber cable more than 15M. For me, I've done all the researching and pull the cat5 cable myself. Fiber is place inside casing, hence no extra cost.

3. I lived apartment and I am getting fiber, not copper. It all depend our TM for high rise. Most high rise will get copper where they will used back their existing phone line. For my case, they pull a fiber straight from my riser box, hence my old copper is not being used.

4. Limited TV channel only. It's free. If you wan more then you need to per channel.

** If they are charging more then just called up TM to confirm. All charge will be recorded on the bill, and not to pay them up directly.
ckboon
post Dec 30 2011, 01:55 PM

Casual
***
Junior Member
458 posts

Joined: Nov 2004

QUOTE(JinXXX @ Dec 30 2011, 01:53 PM)
do HARD reset.. and start back...
*
http://unifi.athena.my/mikrotik_rb250gs.php
ckboon
post Jan 1 2012, 09:49 AM

Casual
***
Junior Member
458 posts

Joined: Nov 2004

klseet.com website suspended!! -.-

so many detail cannot be view


Added on January 1, 2012, 9:51 amhttp://website.informer.com/klseet.com

i guess he forgot to pay up his domain name...


Added on January 1, 2012, 9:53 amerr.. see wrongly.. expire on dec 2012 not 2011..

hmm.. what's happening?

This post has been edited by ckboon: Jan 1 2012, 09:53 AM
ckboon
post Jan 2 2012, 03:59 PM

Casual
***
Junior Member
458 posts

Joined: Nov 2004

possible to use USB splitter to connect to Asus RT-N16?? or we are limited to 2 USB devices only.
ckboon
post Jan 2 2012, 04:26 PM

Casual
***
Junior Member
458 posts

Joined: Nov 2004

QUOTE(klseet @ Jan 2 2012, 04:12 PM)
Try not to, both power & USB devices might not work properly  smile.gif
*
ok thanks.. was thinking of using the splitter for my printer and scanner and 1 ori port for file sharing..

no top of that, custom firmware and asuswrt also support iptv??

currently using stock TM dlink and i keep disconnected from bnet when I am running full download and upload of torrent..

on the first day of UNIFI installation i dont face this problem at all..

i can login in to BNET and max my torrent, but not now..

dunno is it the stock dlink or unifi problem...
haiz...


now whenever i wanna join BNET i got to stop my torrent, which is really a crap having unifi and cant multi-task on game and download...


was thinking of getting a router replacement if confirm is the router problem...

any idea?
ckboon
post Jan 3 2012, 07:18 PM

Casual
***
Junior Member
458 posts

Joined: Nov 2004

QUOTE(xiiao2norm @ Jan 3 2012, 06:50 PM)
If the 2 modem put like this.. the hyyptv will not have signal..
*
??

no such thing la.. u received the signal through fiber and cat5 cable. it's not like normal tv wave!

check ur cabling.. is it loose or not
ckboon
post Jan 3 2012, 07:27 PM

Casual
***
Junior Member
458 posts

Joined: Nov 2004

QUOTE(xiiao2norm @ Jan 3 2012, 07:23 PM)
I check already but all are clear.. may be nid to call tm fixed it
*
lol.. then totally no idea..

i placed my modem on 1nd floor, my dlink router on ground floor and STB near my TV, i don't face the problem as you said..

being using it since 11 May 2011.

smile.gif
ckboon
post Jan 5 2012, 02:25 PM

Casual
***
Junior Member
458 posts

Joined: Nov 2004

QUOTE(xiiao2norm @ Jan 5 2012, 02:18 PM)
Ur house is single storie or semi-d?? if condor and apartment the installation only need for 15 minits~30minits. smile.gif
*
not neccessary... ur statement applied to most of high rise installation only.

I am staying in apartment running fiber... not copper like Most of the high rise. smile.gif

so it take more than 2hr for the contractor to pull the fiber from the riser box to my house, terminate the black fiber and pull the white fiber to my house.

ckboon
post Jan 6 2012, 12:39 PM

Casual
***
Junior Member
458 posts

Joined: Nov 2004

some update on Asus RT-N16 from me.

Flashed it with asuswrt, configure unifi-home using my own range of ip and subnet. Everything is done according to klseet.com; but with the latest firmware compare to klseet site.

Failed to connect to internet. Off all equipment (BTU, Router, STB) for more than 10mins then ON back. Still fail!!

At first i thought it's the IP and subnet problem as i never use the default IP and subnet from the box.

Reset the box again, and this time i used back the original IP. Successfully connected to internet, IPTV and Phone all working. Change the IP back to my desire IP and subnet. Reboot the box, and the internet is up as well. Totally have no idea why the first setup I can't connect to the internet.

Tried BT, Print server and other fancy fancy stuff from the router.

Tried to access from outside (my office) to the router, BT and RDP my home PC. everything is working fine.

** 2 things i hate about it is that, the router can easily hang. I did some minor minor configure the router will just get hang/ not responding. and sometimes the router wouldn't save the configuration even i've press the apply button! the router hang more than 10 times during the setup configuration!! This is ridiculous!

What i can say, once the router is up and running stop messing around with the config!!

i just make a minor change few minutes ago from my office and it hang again!! now i can't access to the router and my BT!! -.-


OVERALL, quite satisfy with the performance of the router but not with the HANGed configuration part.

ckboon
post Jan 6 2012, 12:50 PM

Casual
***
Junior Member
458 posts

Joined: Nov 2004

QUOTE(nabielz @ Jan 6 2012, 12:46 PM)
what firmware r u running?
3.0.0.3.84?
*
RT-N16_3.0.0.3_84.trx

now i needa wait for off office hour to go home and reset the router. damn...

previously my BT was running on max when the router hang...

i still can ping to the IP but cant access, not sure it's still running or not..

might be the firmware issue.
ckboon
post Jan 6 2012, 02:10 PM

Casual
***
Junior Member
458 posts

Joined: Nov 2004

QUOTE(DrBlueBox @ Jan 6 2012, 01:51 PM)
Getting constant hanging with my RT13U as well. The only reason I can think of are either overheating or it can't handle too much data as I have two NAS constantly exchanging data between each other
*
looks like asus is not that stable. Need more comment to verify on this. I get this instead of tplink is because of the standalone BT and Glan.
ckboon
post Jan 6 2012, 02:47 PM

Casual
***
Junior Member
458 posts

Joined: Nov 2004

QUOTE(DrBlueBox @ Jan 6 2012, 02:27 PM)
For me it's the easy to configure QOS. Oh well...
*
the QOS crashed the DM where i need to uninstall it, format my HDD and then reinstalled back the DM..


till now i don't dare to touch and mess around with it.
ckboon
post Jan 6 2012, 02:47 PM

Casual
***
Junior Member
458 posts

Joined: Nov 2004

QUOTE(DrBlueBox @ Jan 6 2012, 02:27 PM)
For me it's the easy to configure QOS. Oh well...
*
the QOS crashed the DM where i need to uninstall it, format my HDD and then reinstalled back the DM..


till now i don't dare to touch and mess around with it.
ckboon
post Jan 6 2012, 02:55 PM

Casual
***
Junior Member
458 posts

Joined: Nov 2004

QUOTE(DrBlueBox @ Jan 6 2012, 02:52 PM)
At least mine would only crash after 10~12 hours but still annoying. oh well TP Link it is next month then
*
u meant ur DM also crashed?
ckboon
post Jan 6 2012, 05:27 PM

Casual
***
Junior Member
458 posts

Joined: Nov 2004

QUOTE(DrBlueBox @ Jan 6 2012, 04:01 PM)
Nope,I meant the router itself. I used my NAS to download so I don't use the built in download manager.
*
oh. ok ok..

i cant comment this yet as i just get the router yesterday and it had already being stress tested by me the whole night yesterday smile.gif

I will config up everything and just play with the BT alone and no more router config after that and see how long it will last.


ckboon
post Jan 6 2012, 06:52 PM

Casual
***
Junior Member
458 posts

Joined: Nov 2004

Nothing to see

my log started at:
Jan 6 16:05:08 transmission-daemon[11896]: Saved "/tmp/mnt/SATA-500G/Download2/config/resume/Arthur Christmas 2011 720p TS XviD 5 1 AC3 - ILLUMINATI.2b12a07644fc1ed8.resume" (bencode.c:1716)

and end at:
Jan 6 18:49:46 kernel: ACCEPT <4>ACCEPT IN=ppp0 OUT=br0 <1>SRC=24.6.137.42 DST=10.12.25.26 <1>LEN=48 TOS=0x00 PREC=0x20 TTL=52 ID=35523 PROTO=TCP <1>SPT=64835 DPT=10669 SEQ=2423330812 ACK=0 WINDOW=8192 RES=0x00 SYN URGP=0 OPT (020405AC04020000)

ckboon
post Jan 6 2012, 11:10 PM

Casual
***
Junior Member
458 posts

Joined: Nov 2004

ok, now i change my mind and expectation for Asus RT-N16 to "IT'S SUCK!" for "ITS LOOKS PROMISING!"

i just dump 2 torrent to it download manager, hibernate my PC and went shopping. 4hrs later i come back, for no reason i found that my PC had be waken up from hibernation, and my PC cant connect to the internet. I tried to ping to all valid external IPs, it can reply... my BT is still running, but the status of the Asus GUI shown Disconnected, but the light with the globe is on.

OK, did say i can ping to IPs, but I can't ping to URL!!! it will return the IP of 10.0.0.1 to what so ever site!!!

Hey, is this really the firmware problem or because of the torrent running on the background?? I never faced this problem even once with my DIR-615, which is being 24/7 for more than 3 months. and today it's the 2nd of router rebooting being perform!!

I do understand I will get a degraded through put if all the function is being, as this is a pro and cons for most of the higher ATM product as well, but to the extend of what I am facing is more than ridiculous!

and today is just the 2nd of my usage of ASUS RT-N16 and I had already had a very had experience on it.

I will give it a week for it to stable down, and if I am still no satisfy with it i will sell it off and get TP-LINK instead.

This post has been edited by ckboon: Jan 6 2012, 11:12 PM
ckboon
post Jan 7 2012, 11:10 AM

Casual
***
Junior Member
458 posts

Joined: Nov 2004

QUOTE(goodseeder @ Jan 7 2012, 05:44 AM)
Wow you must have lots of cash changing routers every few weeks. Anyways I think BT built into router is not good at all. Get a real NAS to do that. The best is:
» Click to show Spoiler - click again to hide... «

SYNOLOGY. Get a 1-drive model and slide in a 2TB drive in there, not expensive and you get the awesome synology software. if you are serious about p2p without using your PC or a big box, get one of these babies.
AND you can use it as a web server, media stream...etc all that.

And the router, get a draytek next time ( http://forum.lowyat.net/topic/2114099/+40 ), costly yes, but you get what you pay for, I have been using mine for weeks now since I bought it and its epic quality and stability, as in literally:
» Click to show Spoiler - click again to hide... «

Those two should set you up nicely nod.gif

I feel TM will impose the cap soon AND throttle torrents for BIZ users. Remember what I said, this was too good to last for long! cry.gif
*
My intention of getting this router is because it have the function to do simple downloading without my PC on. I don't really need a NAS as i already had a media player and getting a NAS is too costly for me.

as for the router, actually i don't have much complain on DIR-615 till recently it giving some weird problem where I will be kicked out from bnet server when I have my DL and UL running on the max. I don't faced this during the first installation of UNIFI, and after I changed it to Asus RT-N16. Draytek is too costly, and I rarely gonna use a single function in there, that's why I will change to TPlink or just remain default to DIR-615.

** I am not that rich, as the router also i bought from a forumer after he claimed a 1-1 warranty, consider 2nd hand? and i will sell it out and get a TPlink which i might as save up a bit of my $. Anyway let see how it goes first.


Added on January 7, 2012, 11:22 amholy crap.. it's really crap!! now some of my download files gone missing from the Ext HDD!! WTF this asus rt-n16..

and after reboot this unit just cant get connected till i manual OFF and ON the connection..



This post has been edited by ckboon: Jan 7 2012, 11:22 AM

3 Pages  1 2 3 >Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0416sec    0.55    7 queries    GZIP Disabled
Time is now: 30th November 2025 - 04:16 AM