1) for me my appointment date is 10th jan but they come on 30th dec. they will call u for appointment.
3) i think they will charge u. after TM call u then will follow up with technician . u may ask him directly.

Yes it is, in fact this is not the first time, it happened before for my other site as well, guess I'll have to host outside Malaysia as I require more monthly bandwidth .....

If you flash Atheros (eg, the TL-WR841ND) or Ralink chip to dd-wrt, you can only create 1 vlan-tag only, meaning it's only Vlan.500 (internet) workable.

Also bear in mind not all Atheros & Ralink chip, i remember i can't get the vlan.500 work on TL-WR1043ND on dd-wrt. Try to use the latest dd-wrt build for TL-WR841ND, it should be able to create vlanX.500

For Broadcom on dd-wrt, can create multiple vlans at port-level, however it can't handle vlan ID more than 15. Previously I tried on some Broadcom routers (eg, WHR-HP-G54, RT-N12, etc), can't even get the vlanX.500 to work ....

I haven't play with dd-wrt for quite sometime already, you may try since they released few builds recently:
ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2011/

Btw, Rizvanrp manage to get both vlan.500 & 600 works on OpenWRT RC6 for TL-WR941ND:
http://klseet.com/index.php?option=com_con...=129&Itemid=114
(use his config file !)

WTF today speed damn fast no lag!!!! XD

This post has been edited by xiiao2norm: Jan 2 2012, 01:57 PM


Attached image(s)

Wow... You do online backup???



I don't think there's Media player with PPS. You can consider to built a HTPC then you can play anything there xD

I think klseet included guide on DDWRT for 841ND on his site. It can't be used for UniFi +IPTV. Only openwrt on 1043 can do this. I'm not very sure. Forgot d

will try my luck to configure and play with it..
yup true, i cant add vlan with ddwrt firmware.. maybe wrongly firmware..
iptv still need to use dir-615 if i flash my tplink841 to ddwrt..
will try the latest release 1st.. if still cant add more vlan, i'll stick to ur firmware then.. thanx for the reply sir..

---

Added on January 2, 2012, 2:37 pmya follow klseet guide.. but maybe wrong firmware upgrade.. cant even add vlan hahaha.. will flash to new release 1st.. for 841ND, only can use for Internet.. no IPTV.. need to bridge it to DIR615 if wanna use IPTV.. nevermind, will play with it now.. lucky have DIR615 as backup if shit happens hahahaha..

This post has been edited by ahlong: Jan 2 2012, 02:37 PM

hi, im unifi wannabe user, the installation will set on this friday, and may i ask if anyone here who before this subscribed to astro, did you deactivate it after u got the unifi on or continue subscribing it?i need opinion in terms of is it worthy to deactivate astro and just watch what the channels that unifi package provided?

welcome to Unifi in advanced
i think not worth it if u terminate astro coz unifi channel are not a WOW channel like astro have
dont deactivate astro 1st, see urself 1st with Hypptv.. if u feel Hypptv better than astro, its ur choice..

ok thanks for the opinion

This post has been edited by masashi89: Jan 2 2012, 03:39 PM

possible to use USB splitter to connect to Asus RT-N16?? or we are limited to 2 USB devices only.

Which dd-wrt version are you using?
I remembered those builds since in earlier 2011 the vlan is broken can't create vlanX.500 properly.

Assuming your is TL-WR841ND V7.x, if you prefer older build, try to use Dec'10 build:
ftp://dd-wrt.com/others/eko/BrainSlayer-V...k_tl-wr841ndv7/
or the latest Dec'11 build:
ftp://dd-wrt.com/others/eko/BrainSlayer-V...k_tl-wr841ndv7/

The steps to create vlanX.500 is important, please refer to the following again:
http://klseet.com/index.php?option=com_con...id=72&Itemid=68
connect the 841's WAN to the BTU/VDSL2 LANport 1

For IPTV, you may need to:
1. login to the DIR-615, set the PPPoE (vlan.500) to manual or even disable it
2. connect the 615's WAN port to the BTU/VDSL2 LANport2

Meaning the DIR-615 only take vlan.600 IPTV traffic from the BTU/VDLS2, whereas the dd-wrt will take vlan.500 for internet, it should just work fine !

Try not to, both power & USB devices might not work properly

ok thanks.. was thinking of using the splitter for my printer and scanner and 1 ori port for file sharing..

no top of that, custom firmware and asuswrt also support iptv??

currently using stock TM dlink and i keep disconnected from bnet when I am running full download and upload of torrent..

on the first day of UNIFI installation i dont face this problem at all..

i can login in to BNET and max my torrent, but not now..

dunno is it the stock dlink or unifi problem...
haiz...


now whenever i wanna join BNET i got to stop my torrent, which is really a crap having unifi and cant multi-task on game and download...


was thinking of getting a router replacement if confirm is the router problem...

any idea?

im using the latest release sir..
everything works perfect but the most annoying part is i realized the ping lost to the router after 15 to 20 reply and the router is about dead/no response in about 5 to 10secs.. this only happened with dd-wrt firmware..
the iptv setup is exactly like what u've wrote up there..

anyway, thanks for the guide on ur web sir.. gonna change and try 1043ND pulak next week..

Wow... u guys all really geng... I thought new year and public holiday this thread will he quiet. You guys still dedicate time for the development of our unifi society. Good job guys.

Wanna ask... VDSL2 BTU LAN1~LAN4 all the same? I can simply connect to any of them? Because TM Technician said must LAN1


All too boring mahhhhhhhhhhhh

HI there just installed Unifi VIP20.
here is the speedtest



P2P Download = Never test it.
Direct Download = Also not tested.

But the performance is superb right now. Will update the info for your guys.

try torrent...got hidden speed inside..

guys...how my 5mbps couldn't reach more than 5mbps one?


This post has been edited by Lynixx: Jan 2 2012, 11:10 PM

Why it should over 5mbps? TM limit it at 5Mbps how you can exceed 5Mbps? Only once in a while will peak over 5Mbps

but i can see someone which with 5mbps could reach 5.10+ something...