u got teh powwahhhh
racing block if u dont lenjan2 can tahan la 1 or 2 yrs

Just share here, if at 155km/h(zxr meter) and u can overtake and leave behind SYM VTS 200/250 then u r very fast......

SYM meter is quite accurate but most of them complain meter heavy....

SYM Modenas 150 top speed 120 GPS

SYM Modenas 200/250 top speed 130GPS +/- 3

I try before with LC meter at 150km/h still got overtake by SYM and kancil.....

---

Added on November 24, 2011, 10:17 amif budget no issue go for UMA sure can go until lepas meter until jarum patah...hehe....

tell u upfront, FZ block the most u can get is 150km/h, maybe new can reach 160km/h on LC meter due to compression...

Need a lot of things to change to get 60mm block performance.....(waste time and money just to get this..... )

I m getting almost 180km/h on LC meter......

First thing, u need find pomen tat know how setup the 57mm block.....

All pomen say can 1 but later sure push buy bigger block, no many pomen know how to mod FZ so there is no fast FZ around.....

I mod my bike with pomen tat still active in cubprix......

---

Added on November 24, 2011, 10:23 ami would prefer tat is measure in Km.....

FZ block at 30k will start lose compression d cos piston ring makan d but still can use.....

This is wat i facing now....

I would say depends la if u 1 mth mileage almost 2k, less than 1 yr the racing block KO d....

This post has been edited by NewGUY: Nov 24 2011, 10:23 AM

--

This post has been edited by alexei: Nov 25 2011, 12:10 AM

i want to test with 2 stroke modi next

it depends bcos for ur TZM also got NCC coat and can only change piston and piston ring or change whole set and is expensive for ori....

For LC is not an issue bcos a lot of choice.....

So far I bought my bike already come with FZ and dun hav any issue, even for other LC user also no issue....but 4 stroke better use DiAsil can last hotter but standard steel lined block cause a lot of problem previously on LC.....

4 stroke need material tat can stand the heat.......

Correct me if wrong....

---

Added on November 24, 2011, 11:21 amu using 60 or 62 mm block give a try, sure at least can follow.....

This post has been edited by NewGUY: Nov 24 2011, 12:56 PM

--

This post has been edited by alexei: Nov 25 2011, 12:10 AM

+1 Agree....Diasil is a material that yamaha use it to made block...Not a coating....

Thanks for the info...

Last time all oni use steel block, can rebore at least 5 times. After kenot rebore just put in slide.....


If 1 want 2 strokers come here the title need change d to......

<<XVI>>[ LYN Yamaha 135LC & 2 stroker Club V16 ] <<XVI>>

or <<XVI>>[ LYN 2 stroke bike & Yamaha 135LC Club V16 ] <<XVI>> or the bike u 1 to invite.....

--

This post has been edited by alexei: Nov 25 2011, 12:11 AM

If u want.. I can change the siggy of the thread to 2 stroker pro is welcome to join..

---

Added on November 24, 2011, 10:17 am

if budget no issue go for UMA sure can go until lepas meter until jarum patah...hehe....

tell u upfront, FZ block the most u can get is 150km/h, maybe new can reach 160km/h on LC meter due to compression...

Need a lot of things to change to get 60mm block performance.....(waste time and money just to get this..... )

I m getting almost 180km/h on LC meter......

First thing, u need find pomen tat know how setup the 57mm block.....

All pomen say can 1 but later sure push buy bigger block, no many pomen know how to mod FZ so there is no fast FZ around.....

I mod my bike with pomen tat still active in cubprix......

---

Added on November 24, 2011, 10:23 am

i would prefer tat is measure in Km.....

FZ block at 30k will start lose compression d cos piston ring makan d but still can use.....

This is wat i facing now....

I would say depends la if u 1 mth mileage almost 2k, less than 1 yr the racing block KO d....

[/quote]

wah.. fz150 can up to 150km/h only? Im thinking of high speed and also can last long block 1, i found out shark block quite interesting, n very cheap oni. RM140 like that can get 62mm, but fz rm340 cheapest i can found. rm140 = more speed, rm340 lower speed than rm140.. hmm.. my fren said racing block if keep on full throttle enjin will terabur atas jalan. true ah?

LOl...Is true la....>< Keep full throttle on racing block will cause u thousand ringgit to repair if got anythings wrong....Crankcase broke...Connecting rod shaking, these two matter can make u spend thousands and thousands...><

yeah, even that SYM 250i can smoke blade 250 easily (saw it with my own eyes, and the uncle on that SYM I think 2 times my size )

my stock ride vs stock SYM 200, took some time to overtake. but once I got smoked by a modded one

SYM 250i raw power got 18hp++.....

err.. is it? if change fz150 only can up 10-20km/h then better use normal lc block.. stil can go max 140km/h I use belang exhaust n racing cdi, only feel pickup better, but top speed still da same. sad..

OK la...140 also got 110kmh what....><

150km/h after change to fz block is not based on lc meter..
its on gps? right?

I think is based on GPS but definaly not lc meter...Cause original engine also can go 150kph on lc meter.

hai all ...

long time not coming here..

just finish change EO + OF

use this one laa..
this weekend maybe i will go to kenduri at Seremban,so need to change early lor..

This post has been edited by LcBoy135z: Nov 24 2011, 07:58 PM

uiks? meaning on GPS mine 140km/h only 110km/h? original engine here fz or lc?