Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
12 Pages  1 2 3 > » Bottom

Outline · [ Standard ] · Linear+

 TAMIYA mini 4wd V12, ミニ四駆公認競技会

views
     
TSszngszng
post Oct 31 2011, 08:07 PM, updated 12y ago

New Member
*
Newbie
0 posts

Joined: Apr 2009
From: uptown, pj
MALAYSIA MINI 4WD CHAMPIONSHIP 2011

user posted image


ROUND 1 JUNE 2011

ROUND 2 JULY 2011 10 SPOTS

ROUND 3 AUGUST 2011 10 SPOTS

ROUND 4 SEPTEMBER 2011 10 SPOTS

ROUND 5 OCTOBER 2011 9 SPOTS

ROUND 6 NOVEMBER 2011 9 SPOTS


GRAND FINALS DECEMBER 2011



TOTAL OF 48 SPOTS ARE UP FOR GRABS


RULE WILL BE OFFICIAL TAMIYA RULES UNLESS STATED RULE CHANGE FOR INDIVIDUAL RACE

ROUND 1 WILL BE RESTRICTED TO ONLY STOCK MOTORS FOR BOTH SINGLE SHAFT AND DOUBLE SHAFT CARS.


OFFICIAL BATTERY FOR THIS SERIES WILL BE ANNOUNCE WITHIN THESE 2 OR 3 DAYS AND IT WILL BE CHEAPER THAN WHAT WE ARE USING NOW TO CUT COST FOR THE RACERS


EACH RACE A SINGLE RACER COULD REGISTER UP TO 2 SPOTS FOR EACH RACE

THE RACE FORMAT WILL REMAIN AS TIME ATTACK FOLLOWED BY 1 ON 1 IN EACH ROUND UNLESS STATED FORMAT CHANGE FOR THE SPECIFIC ROUND

official tamiya rules:
http://www.tamiya.com/japan/cms/servicereg...regulation.html
http://www.tamiya.com/english/mini4wd/regulation.htm

This post has been edited by max_cjs0101: Nov 1 2011, 05:00 PM
TSszngszng
post Oct 31 2011, 09:22 PM

New Member
*
Newbie
0 posts

Joined: Apr 2009
From: uptown, pj
rempit season video stolen from eelen's channel:


This post has been edited by szngszng: Oct 31 2011, 09:23 PM
TSszngszng
post Nov 1 2011, 10:45 PM

New Member
*
Newbie
0 posts

Joined: Apr 2009
From: uptown, pj
QUOTE(izwan.rasip @ Nov 1 2011, 09:56 PM)
user posted image

Finally with a little bit luck manage to completed the track with a little bit speed but it's quite hard to counter the lc with these speed. Damn...

Cheers~

----------------------------------------------

Btw skool87, nice to meet you man.
Please feel free to ask anyone here, Malaysian racer are very friendly. Trust me. Ha ha
*
oh... the war still on!!! ok we know what should do !!
TSszngszng
post Nov 2 2011, 08:39 AM

New Member
*
Newbie
0 posts

Joined: Apr 2009
From: uptown, pj
QUOTE(meio @ Nov 2 2011, 05:58 AM)
Ouh. Any war count me in Mr Ng. Ha ha. Cant sleep la saw that timing.

Madey care to join? I bet ur hand is itching.
*
for sure we never miss you... biggrin.gif
TSszngszng
post Nov 3 2011, 12:57 PM

New Member
*
Newbie
0 posts

Joined: Apr 2009
From: uptown, pj
user posted image
TSszngszng
post Nov 4 2011, 09:35 PM

New Member
*
Newbie
0 posts

Joined: Apr 2009
From: uptown, pj
the purpose "my car is slow" post on the beginning intend to encourage people to post more tips and info to share with newbie, seem only madey able to read his word.... biggrin.gif

so please post more tips biggrin.gif

cheer...

This post has been edited by szngszng: Nov 4 2011, 09:35 PM
TSszngszng
post Nov 5 2011, 01:55 PM

New Member
*
Newbie
0 posts

Joined: Apr 2009
From: uptown, pj
QUOTE(my car is slow @ Nov 5 2011, 10:56 AM)
Mr szngszng u really get me wrong sorry
What I really meant can only be understood by mr madeywa which I respect
*
as i said i know only madey know what you talking about, thus i also know... brows.gif

Added on November 5, 2011, 2:00 pmi am the newbie after apai tongue.gif

This post has been edited by szngszng: Nov 5 2011, 02:00 PM
TSszngszng
post Nov 5 2011, 04:02 PM

New Member
*
Newbie
0 posts

Joined: Apr 2009
From: uptown, pj
user posted image
biggrin.gif
with my new milling bit...nice...
TSszngszng
post Nov 5 2011, 08:26 PM

New Member
*
Newbie
0 posts

Joined: Apr 2009
From: uptown, pj
QUOTE(KeithKW @ Nov 5 2011, 05:18 PM)
He's getting out of hand.. somebody have to stop him  laugh.gif
thumbup.gif  thumbup.gif  thumbup.gif
*
still under control... no worry... hahaha

QUOTE(keenhawk @ Nov 5 2011, 07:38 PM)
Spend how long to cut?
*
within 1 hours but more time on plan and setup equipment to do the job...
TSszngszng
post Nov 5 2011, 11:22 PM

New Member
*
Newbie
0 posts

Joined: Apr 2009
From: uptown, pj
QUOTE(skool87 @ Nov 5 2011, 09:42 PM)
u also got milling machine at home?
*
a multifunction mini machine... biggrin.gif
TSszngszng
post Nov 5 2011, 11:34 PM

New Member
*
Newbie
0 posts

Joined: Apr 2009
From: uptown, pj
QUOTE(skool87 @ Nov 5 2011, 11:33 PM)
tomorrow TU open or not?
*
sure... tu is open tomorrow ... thumbup.gif
TSszngszng
post Nov 6 2011, 01:04 AM

New Member
*
Newbie
0 posts

Joined: Apr 2009
From: uptown, pj
QUOTE(daisuke @ Nov 5 2011, 11:45 PM)
Confirm?coz i m heading there tomorrow for parts
*
yes, it has been confirmed by Mr Teoh from TU smile.gif
TSszngszng
post Nov 6 2011, 09:06 PM

New Member
*
Newbie
0 posts

Joined: Apr 2009
From: uptown, pj
QUOTE(lion leo @ Nov 6 2011, 07:20 PM)
here it is my home made track,it not 100% nice or good to look at and it needs something to support it at the turns , but at least it got the job done  tongue.gif
[attachmentid=2521962]
[attachmentid=2521963]
*
nice at least you have a place to let your car run...

btw, can look for some dry ditch near by, that's the place i put my car, very nice speedway...

at hometown, we call mini 4wd, kete longkang~~
TSszngszng
post Nov 6 2011, 10:05 PM

New Member
*
Newbie
0 posts

Joined: Apr 2009
From: uptown, pj
QUOTE(ur4m3shi @ Nov 6 2011, 09:57 PM)
according to reliable source ... can finish this track at 16secs .... sweat.gif ... pushh!!! pushh !!!! glhf!!! smile.gif
*
1 lap 16 i confident can do!!
TSszngszng
post Nov 7 2011, 11:41 PM

New Member
*
Newbie
0 posts

Joined: Apr 2009
From: uptown, pj
QUOTE(clio8v @ Nov 7 2011, 07:49 PM)
report of an italian race!

*
wooo... this layout is fantastic !!! i like!! biggrin.gif
TSszngszng
post Nov 11 2011, 12:43 AM

New Member
*
Newbie
0 posts

Joined: Apr 2009
From: uptown, pj
QUOTE(clio8v @ Nov 11 2011, 12:33 AM)
after 1h of run-in my result is 21100 rpm@2.9V
tried another hour but no more changes
*
simply that reading is ok for atomic tuned motor... in my opinion...
TSszngszng
post Nov 12 2011, 05:01 PM

New Member
*
Newbie
0 posts

Joined: Apr 2009
From: uptown, pj
omg omg omg....

those cars are bloody fast!! yest stable!!! notworthy.gif notworthy.gif


TSszngszng
post Nov 14 2011, 08:12 PM

New Member
*
Newbie
0 posts

Joined: Apr 2009
From: uptown, pj
QUOTE(clio8v @ Nov 14 2011, 07:49 PM)
I did it with 34mm, but all other racers with standard 31mm

anyway, the track was this one
» Click to show Spoiler - click again to hide... «

*
so what is the result with 34mm? is it better and faster than other racer?

This post has been edited by szngszng: Nov 14 2011, 08:13 PM
TSszngszng
post Nov 14 2011, 08:45 PM

New Member
*
Newbie
0 posts

Joined: Apr 2009
From: uptown, pj
QUOTE(clio8v @ Nov 14 2011, 08:41 PM)
finished 2nd, but other racers were all very fast!
*
at least you break through the traditional of the Italian style with some good result.

can you please post your car, so we can have a look and discussion smile.gif

Added on November 14, 2011, 8:48 pm
QUOTE(the crow R @ Nov 14 2011, 08:43 PM)
Wow....10m/s with hdp? notworthy.gif  notworthy.gif  how heavy is the car? With 34mm or 31mm size tyre ?

Tks biggrin.gif
*
very big and a lot straight layout can do...

This post has been edited by szngszng: Nov 14 2011, 08:48 PM
TSszngszng
post Nov 15 2011, 12:38 AM

New Member
*
Newbie
0 posts

Joined: Apr 2009
From: uptown, pj
QUOTE(MS Pro Pink Panther @ Nov 15 2011, 12:22 AM)
Yes yes.....true! It depend on the lay out! Pls don mind me asking a question! In that video, is that speed really reach up to 10m/sec? That speed in video doesn't look really fast but IMO may be that video is capture far away so it look not really high speed. May I know what is the length in that lay out, how many straights n corner? Got time attack?What fastest time attack? Mind telling me bro? icon_rolleyes.gif

Added on November 15, 2011, 12:30 am
I love your Astute body paint job... notworthy.gif
*
this layout 250meters, they are using 25 sec to complete it, so it's 10m/s...
« Next Oldest · Hobbies, Collectibles and Model Kits · Next Newest »
 

12 Pages  1 2 3 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0217sec    0.38    7 queries    GZIP Disabled
Time is now: 25th November 2025 - 10:07 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.