Around serdang or seri kembangan ada track tak?

setapak?...hmm cam best..ni asyik2 speed houz n TU...but far from my place

So how was the track layout there.....super speed or semi speed? if got, post la some pics here...kasi bakar line

newbies hahaha.....rendah diri betul abang ni

Happy Monday morning everyone..


Still a work in progress. Dunno want to rempit it or not.

hehehe....NICE!! the rime looks 'MENGANCAM'!

setup for super speed ke? what size are the rear rollers?

Macam biasa, semi-speed/semi-tech/tech/jump² one.
Rear rollers are 19mms. The ringless type.

The setapak track at the new building beside columbia hospital if I not wrong..3rd floor atas kedai mamak pelita..track high speed with loop..fun2 okay la..i prefer a semi tech track..but sad..nowdays many track change to high speed track..yesterday go TU them oso change too highspeed track..boring..me meet @toacheng also at setapak track last saturday nite..good place for lepak2 la..

This post has been edited by Ji3MOON: Dec 2 2013, 11:49 AM

hehe...if semi speed, blh test kt speed houz nk turun blh roger2

cam menarik...nvr really try my car on high speed/loop track yet....rasa nye semua brake kena cabut

TU changed high speed....mesti ramai yg suka track cam tu...at least your car is safer

anybody here join the race kt saloma bistro?

Yeah bro..bracke all kasi cabut..if not confirm sangkut..the place ok la for lepak..got table for repair n charge ur battery..and less people too..last saturday I lepak till for 4am haha..

Tourney? Go tgk boleh la..kereta belum ngam.. :-(

kena tunggu stock2 baru sampai first....then I setup 1 for high speed track...current 1 just nice for semi speed, lazy to change again

bunyi cam menarik...can lepak till 4 a.m! hehe, my wife gonna kill me after that

feel free to post pics of that place if u got la

Tamiya official rules allow tires trimming?

As long as your tires when fitted to the rims used by u with the machine you are using, is within the limit : diameter 22-35mm, width 8-26mm brah.

yup, trim tires allowed, based from tamiya official website:

Modifications to the tire's shape are allowed if they comply with the Car Measuring System outlined above. However, changing the material properties of the tire surface (including, but not limited to, applying glue or other substances to the tire surface) are prohibited.

Front and Rear Tires: Diameter: 22-35mm, Width: 8-26mm (Note that tires must be attached.)

semitech or semispeed??


more to semitech??

Yup..
This one more to semi-tech I think with the front 13mm double rollers with rubber rings and those 19mms.

Capai² barang dalam kotak then assemble only.
Later baru perasan, "Eh! Ini semi-tech!"

need to master the art of trimming tire....that's my next mission

Below my latest setup...change front roller to 8 - 9 mm

To be tested at speed houz tomowo....manage to trim the front tires but I guess can still make thinner

Once done....plz post again.....hehe

Always make sure ur tyre are same diameter or else it will slow ur car down or samage ur gear

Hi guys, I used to play this many years ago (maybe about 15 years or more) near Atria, Damansara Jaya and I am just restarting from scratch (my old proto emperor zx had an unfortunate accident with a wall :~( ).

Right now, I have to relearn everything again. I just got myself the basic Shadow Shark AR chassis. I want to know what should I do next?

Any recommendations?