guys..

does thunderbolt! working with latest galnet miui ics?

thanks pikachu..
already downloading the galnet miui ics..waiting to be flash
will share the result later

which version of miui that you are referring?
chameleon stable or ics development?

My current homescreen..



About phone..





Really enjoying using this rom..superb fast

[quote=RoxyMunky,Nov 5 2011, 11:41 PM]
nice bro~~

ICS weekly... is it stable??

[/quote)

Stable and fast..but now realize that they still didn't solved the battery issues..now i've already flash the stable version which MIUI 2.10.21,but the battery drains also same..
i've followed your instructions to disable some sort of things..but it doesn't improve my battery performance..
battery drain even if phone is idle..any suggestions?

same goes to me..really bad battery,but ui was so nice and satisfying performance..so how your battery life after calibration?

same situations here


my baterry drops from 97% to 32% during sleep hours..about 6 hours..
any other things that you do for your battery life?
or the drain is because of the battery itself..the battery already 16 month of age

---

Added on November 9, 2011, 12:43 pmhow about you try it first and share the result here

This post has been edited by fAr3z: Nov 9 2011, 12:43 PM

already applied this step



with autokiller preset to LOST..the result still same..are you using miui with thunderbolt!?


waiting for your result..so far at the forum got no issues regarding that version

will try thunderbolt later on

i also set the timeout to never..but i always lock the screen when not using the phone..
is it not same? lock phone != screen timeout?

but actually i already turn off my screen before sleeps and the battery still drain too fast
nevermind..i'll try it tonight

+1


same goes here..
hopefully can find solutions to solve this issues on this weekend

btw,which version of miui that you are using bro?

This post has been edited by fAr3z: Nov 10 2011, 11:07 AM

is it ICS?

my battery also bad..think we need to calibrate it bro

considering to try this method..seems there are positive feedback from the users

pikachu..
which version of thunderbolt! is the best for MIUI ICS 1.11.7?
because i can see that u got 3 version of thunderbolt! which is 40mb,50mb and 60mb

will try the 50MB
just want to clarify this first, do i need to follow all instructions if i'm on the miui rom with talon kernel?
or i can just start with step 5?

Instructions
1. Copy the CWM zip to your internal sdcard
2. Mount /data and /system in CWM (IMPORTANT!)
3. Install using CWM
4. Wait for bootup
5. Open up Script Manager and launch /sdcard/bolt_scripts/remount_{*} as Root and as Boot. This is done because on Voodoo lagfix, Voodoo will remount the partitions again later after init.d scripts finished launching hence reverting the mounts to stock lagfix mounts. The script then has to be launched only after the Android OS has launched. One way is to use Script Manager.
6. Open up Script Manager and launch /sdcard/bolt_scripts/sqlite_optimize. This script can be used arbitrarily at anytime that you want. Don't load it as boot or copy it to init.d though, it'll significantly slow down your boot up as the script is a very long running script.
7. ????
8. PROFIT

i'm using talondev?

TalonDEV-0.5.1-RC1-1000-I9000-CWM3

lorr..doesn't work???
didn't check it because when i flashed it and its done with no erros..
just now i check the kernel version in about phone and it stills the default miui kernel..

so i need to download the other version of thunderbolt! right(not the talon version)?
and then just follow the instructions?

already installed it through cwm and run the script but when i try to see whether it is works or not, the result was not same as stated at OP

i can find this file under /system/etc/init.d/:
S70darky_zipalign
S98screenstate_scaling
S98system_tweak

using terminal, when i run this code:
sysctl -a | grep vm

i didn't get this:
dirty_ratio = 90
dirty_background_ratio = 70 (when screen is on)
dirty_background_ratio = 55 (when screen is off)
vfs_cache_pressure = 1 (when screen is on)
vfs_cache_pressure = 20 (when screen is off)

same goes to this code:
getprop | grep MEM

the value is not same as this:
[ro.FOREGROUND_APP_ADJ]: [0]
[ro.VISIBLE_APP_ADJ]: [1]
[ro.PERCEPTIBLE_APP_ADJ]: [2]
[ro.HEAVY_WEIGHT_APP_ADJ]: [4]
[ro.SECONDARY_SERVER_ADJ]: [5]
[ro.BACKUP_APP_ADJ]: [6]
[ro.HOME_APP_ADJ]: [3]
[ro.HIDDEN_APP_MIN_ADJ]: [7]
[ro.EMPTY_APP_ADJ]: [15]

how did i conclude this?its not working or i've done it in a wrong way?

wow,can stand up to 1 days?????
how did u do that bro?
any tweaks?