RAM: TWIN2X2048-6400C4 ~ 2x 1GB Corsair XMS2 PC2-6400 800MHz 2.1V
(OCed to 1066MHz w/ same Vdimm 2.1V)
http://www.newegg.com/Product/Product.aspx...N82E16820145034
Timing: 5-5-5-12-2T
Performance rate on Vista: from 5.0 increased to 5.5
----------------------
Qs:
Should I change my timing to 5-5-5-12-2T to 5-5-5-15-2T?

How long will my RAM last if I overclock like this and use it daily basis?

---

Added on December 11, 2008, 10:57 amwoot.. after a few hours of usage.
BSOD 0x00000050 Page_fault_in_nonpages_area.

This one caused by RAM?
Should I change VDIMM originally from 2.1v to 2.2v or what?
Or should I change timing from 5-5-5-12-2T to 5-5-5-15-2T?

(I did set FSB and MEMORY to "unlinked")
after BSOD, now Im trying to make it "linked". Will it work just fine?)
My Q6600 2.4GHz originally 1066FSB.
Overclocked my Q6600 to 3.0GHz with 1333FSB.
Overclocked my XMS2 800MHz 2.1v to 1066MHz 2.1v.
After linked, Processor FSB is 1333, Memory is 999MHz.

This post has been edited by sagittaru: Dec 11 2008, 11:04 AM


Attached thumbnail(s)