Not sure if this is useful, perhaps a database for Corsair Memories Overclocking here is good for sharings and tips. Please follow this format

Type: XMS / Value Select
Revision & type of chips:
Highest FSB reached:
Voltage:
Timings:

Please include a screeny of CPUZ with SuperPi 32M.

How to read memory label: Here
Revision and IC : Here

Please keep this thread clean. Only Corsair discussions.

This post has been edited by kucingfight: Oct 14 2005, 11:07 PM

XMS Series

1. pcmoddingmy - XMS3200 TwinX 512 rev1.2 (TCCD 513) - 325fsb@2.7v 2.5-4-4-8 1T
2.KilJim- XMS3200 TwinX 1024 Rev1.2 (Infineon Die,Rev A) -285fsb @2.85v 3-4-4-8 2T
3. ztlee - XMS3200 TwinX 1024 Rev1.4 (TCCD) - 276fsb @ 2.5-4-4-8- 1T
4. kucingfight - XMS3200 TwinX 1024 Rev5.2 (Promos Rev A)- 271fsb@2.65v-3-4-4-8-1T
5. Najmods - XMS3200 TwinX 1024 Rev5.2 (Promos Rev A)- 271fsb@2.7v - 3-4-4-8-1T


Value Select Series

1. jsnkok - 1x 512MB PC3200 VS - 250fsb @2.7v 2.5-4-4-8- 1T

This post has been edited by kucingfight: Oct 22 2005, 07:15 PM

I'll start

Type: XMS3200 TwinX 1024
Revision & type of chips: Rev 5.2 , Promos -5 Rev A
Highest FSB reached: Currently @ 271fsb
Voltage: 2.65v
Timings: 3-4-4-8 1T




This post has been edited by kucingfight: Oct 15 2005, 03:20 PM

Currently testing @ 265fsb CL2.5-4-4-8-1T @2.65v

I'm impressed with the 'unknown' Promos ICs. Little is known bout these chips. I've even got it to 272fsb @ 3-4-4-8 @ 2.65v, sadly i can't get my CPU stable @ 272x14 . But Stress RAM(in SP2004) passed flawlessly. I've got a feeling, this ICs will scale quite high in CL3

KillJim,according to the House of Help's site. Ur's should be Infineon,Probably CE/BE -5

'CMX1024-3200C2 XMS3202v1.2 0522115-2 = INFINEON, Die Rev A 64M X 8'

The infineons doesn't take voltages well, probably 2.7v max would do the trick

Uhhh...thread getting dead.

Anyways, for those On P4s (875p/865pe) or looking at any XMS series that is affordable and able to do high FSBs @ Slack timings, i recommend getting the 3-3-3-8 XMS3200 rev5.2 version.

This Promos chips are doing really well. waay beyond my expectations

If the 5.1=5.2, i've got the 5.2 to 272fsb 1:1 2.5-4-4-8 @2.65v

Charge, Specs are as of my sig. Uhh..anyways my Asus died Yesterday.

The rams are quite good actually,considering the price (rm480-rm500) . Too bad i was priming at CL2.5-4-4-8 @272fsb @ 2.65v when i smelled burning silicones.

Here's da benchies on 278fsb
As said, i believe these rams could hit higher speeds. MY testbed maxes at 272fsb.



This post has been edited by kucingfight: Oct 18 2005, 10:26 PM

Btw, has anyone come across Corsair 512mb VS with BP and Samsung UCC chips locally?

Been tweaking and playing with my Corsairs, and managed to get them to CL2-3-3-8 @ 2.6v. very impressive for a relatively unknown chips.

@Najmods, 3.2v is alot at 270fsb. mine did 271fsb 3-4-4-8@ around 2.65v. Maybe u can try lowering the voltage and have a try n c?

First of all, which revision is your rams? It's written on the sticker. once the revision is known, we can guide u from there.

Anyways, if your on intel, it's best to run 1:1 with slack timings. [relatively speaking when you don have the rams that will do tight timings]

First of all, is ur CPU capable of doin 13x271fsb stable? If it's guaranteed stable on that speed, mem tweaking is needed

U've got to ensure that the CPU speed isn't the limiting factor. Obviously, if the CPU is the ceiling wall, the RAMS can't be pushed.

YEs, there's a solution. Get a Dry ICe, LN2, Prommy Setup