QUOTE(cyruz13 @ Feb 27 2012, 09:38 AM)
bro.. possible to help me check the user manual or the box of the belkin power pack 2000 ..
the output is how many volt?
considering getting one.. and also the mah.. is 2000mah right?
Here are the specs:
2000mAh
Rated input : DC5V-500mA
Rated output : DC5V-500mA
Battery capacity: 2000mAh
Recharging time: ~3 hours
from my calculation (which i found on the internet), the prime is 25W, meaning 25W / 12V = 2.083 A = 2083 mAh
the Belkin is 2000mAh. therefore, the belkin should almost fully charge the Prime ONCE =p
Added on February 27, 2012, 1:35 pmQUOTE(chiahau @ Feb 27 2012, 01:31 PM)
Very easy 2 apply one, you just clean the screen, wipe all dust and etc.
then slowly place the screen protector and peel off the back layer.
If you are careful, should have no bubbles at all..
Been sticking so much SP for phones and camera lately..
yup, it just takes practice =) before you apply the SP, use cellotape to clean the screen once first. then if got dust or anything stuck, just use cellotape again and remove it
This post has been edited by cursebreaker: Feb 27 2012, 01:35 PM