sold tq support

This post has been edited by IceCube: May 6 2014, 04:05 PM

Hi Bro,

Wah, very poison... I did the chassis foaming 3+ weeks ago. How long is the promo on? No money now!!!!

Think this promo will be running for some times til after CNY maybe.

*reserved for more pics*

any close up for this material? first time see such kind of material for sound proof....curious bout it... =)

Very nice. I would be saving up the the soundproofing. How would rate the sound proofing? I mean for a Iswara, you know very noisy can it be quite like an Altis or Camry? I am not aiming too high here.

Hard to take pic of it. Best if you can drop by and we can show you. But dont judge a book by its cover.

Wah, quiet like camry? Need alot of work to do, can be done but alot of material and work to be done.

Got sample ?? Can try 1st ?

Well, its works well on Lexus and Merc it should work very well on most cars.

Got best price for Foam + This Barrier?

For Alza car...

Have package together???? For the foaming and the sound proof. Savvy is my car.

Hi Bro,

Can do on the floor panel?

Will pm you the package pricing.

We cover the kick panel (front floor near the throttle pedal side and other passenger side).
We cover crucial area which is the cause of noise rather then "cincai" cover the whole floor which cost more and waste material. This make cost reasonable and results is very very powerful.

Thanks to 2 cars today, a Vios and Myvi who did their ride with our Sound Barrier!

Please post your review on how the product perform on your ride. Cheers and Enjoy it~

vios car review:

have done for package 1.

confirm after done the soundproof for the 4 doors, it get better then before. feel more quiet。

however for the dashboard, i feel the sound from engine is still same. maybe all well known Vios engine is noisy.

wind noise no more, but of course it will feel there have increase of engine sound and road sound. it means you have to do the fender soundproof and so on to balance it.hahahaha... save money for next package.

overall, is worth to take. keep it good work kevin.

Bro Icecube,
But how is this material comparable to Dynamat. Reason why I ask cause Dynamat looks much thicker than the picture shown.

For sound proofing, shouldn't thicker foam be better in absorbing the sound away.

aiks poison again...will do it....stil got stock for next mth?

Bro it's me again! This one is stick on plastic panel? Or lik bitumen/dynamat/sp mat stick directly on the metal part? I'm highly interested! Might want to take full package man! Pls me me!

ya...i'm interested to know which part of the barrier sticked...bro icecube can take some installation processing picture post it up ?

Then should come up a special front bonnet package for the Vios. Thanks for the reviews. When you do the fender package,i'll throw in a free bonnet sound barrier to quiet down your engine noise (hopefully).


Dynamat is made from other material, not too sure if better then this but its surely much more expensive and heavy since its thicker. Since this material is used by car manufacturer , i guess its the best bang for money and definitely do a great job too.

Yes, will carry this product from now on. Supply is ample but do sms or pm me to arrange for installation.


Its stick on the plastic panel. Those like bitumen/dynamat/sp mat is more toward vibration damping rather then noise reduction.

Its stick on the door panel, pillar cover, dashboard , kick panel, and other crucial parts.

Its the same old Kelvin, everything no frills, not marketing, just pure workmanship and result! U should not take the photo of the USB lying on the floor lar! Some ppl might think its cheapo...no class etc etc...but i believe that you provide a good, practical and affordable solution...will drop by and have a look at the material...c u soon bro....and keep up the good work! People- please spread out the poison and have Malaysian doing their foam here! Stop cut throat practice and stop exploitation!!

why la this person always poison lyn members..hehehe..nice item!

bro, excessive engine noise above 4k rpm frm saga blm.. i have done pretty sound proofing to my blm, only firewall untouched.. you got solution for me?

nice one kevin

count me in bro.....but only for the 308thp....dun think my better half's ipsum need...too quite will haf the empty hollow effect on the passengers lol

can u explain in detail what can be done for my ride bro?? i'm looking at reducing road/tyre noise as a priority....the rest u can poison away la.....

Thanks for the suggestion bro! When you free come by we chat and check out your ride after the foaming the other day.

He is one of hundreds of satisfied customer who feels that "cheap thing can be good sometimes" and he feel that its a must for you guys to try it out if you decided to do any type of foaming for your ride. We have the 'kung fu' and different application for different cars/drivers. DIY can be cheaper(or more expensive) but once you foam wrongly, you cant revert back. So, play safe, and my sifu perform his kung fu on your ride for the perfect foam.

Hi bro,
Yes, drop by and we see what we can do to reduce the noise.


When coming over bro~

---

Added on October 21, 2011, 12:13 pmFor your 308T, if you want to reduce road/tyre noise, you can do the fender, kick panel and dashboard . Most of the noise is coming in from there.

Will pm you a special price for this special package for your solution.




This post has been edited by IceCube: Oct 21 2011, 12:13 PM

thanks kevin for such a good service, known that my engin sound noisy and he call me up to meet him for some free inspection on engine part. and also thanks for the solution. thumb up~

Aiyoyo....poison alert!!!

How was it? Does it help your engine noise? Let me know if anything..
Lol. Good stuff, so white poison. L lol.

Not to say poison lar...just that good things must share with other ppl, next time ppl will let me know where got good things mah...if not for kelvin, i would have walk straight into JAWs mouth and lose an arm or a leg!! i save at least RM500 bucks edi wor...

Hey bro, nice product there. Still remember me? 1st person to try your foam haha. Anyways, pls quote me good price for fender, roof, dashboard, kick panel, and pillars (exclude foam for pillar)..

Quote me price individually and all together bro. Sadly, doors and rear boot I've already done insulating :/

---

Added on October 21, 2011, 6:59 pmHey bro, nice product there. Still remember me? 1st person to try your foam haha. Anyways, pls quote me good price for fender, roof, dashboard, kick panel, and pillars (exclude foam for pillar)..

Quote me price individually and all together bro. Sadly, doors and rear boot I've already done insulating :/

Perodua viva with adjustables

This post has been edited by noblesse: Oct 21 2011, 06:59 PM

Yes bro~ your ride after foam still good eh?

Yes, bro~ I remember, you are the first with the chassis foaming one and lowered with big disc brake and large rims~

Will quote you by pm for the required location.

Hi Kvin,
The foaming is good, and solid whenever i tackle corner, and i guess the wind noise and other NVH are reduced, now hv a noticeable quieter ride. Not to say very very quiet lar..but i guess it is additional feature for the foaming.... Luckily i asked for comfort undercarriage, if not, might be too hard for me....but it proves that it works!! Laterla bro, I check out The USB, right now a bit pokai edi..hahaha

Dear Kvin,


Mine is the new 1.5 Myvi any ideas where to put this first as i find lots of noise from fender area/tire noise.

engine bay seems quite and also wind noise also minimal but have you tried the new 1.5 varient?

thanks and looking forward to your proposal.


thanks

Yes we now have many new material but come by next week as we are attending sound proofing training on this thurs and friday.

Dear Kevin,

was think of dropping by this saturday after 12 is that possible? or sunday? weekdays both me and the wife works so very difficult to cabut.


thanks

where the picture? i dun see anything?

Ya, sure can. Saturday and Sunday also can. Come over and we can chat more.
Actually my training is next week Thursday and Friday.

Will update soon on more pics on customer's cars.

Already done package 3 and totally happy with the outcome .

Even though the new myvi 1.5 has already come with some new soundproofing (whoch could be seen when kevin dismantled the fenders) there was a significant road noise from the tire's.

After doing and I tested on the roads I usually travel and the change was significant especially when loose stones/pebbels is thrown from the tire's to the fender.

All in all Thanks Kevin for the good work and explanation very happy with the oucome .


thanks and kind regards

wat about Inspira??? tyre there noise ... pls pm me the best price.

Hey,

Have you ever done sound proof on civic fd before?

Thanks bro for the support and review!
You should do the doors also (soon) if you add in better speakers and amplifier.

PM-ed. Let me know if anything.

---

Added on November 2, 2011, 2:24 pmNo but its the same as others car. Do damping, then insulation then absorption.



This post has been edited by IceCube: Nov 2 2011, 02:24 PM

Reason asking as I'm a bit skeptic when it comes to remove/install back panels and other components.
If you've done a civic fd before I might be more confident on your workmanship.

For my new car the kia sportage, there is no screws visible and all the parts fit very snugly. Cover to covers space is around 1mm as its a seamless join. I too was skeptical about workmanship. For my back area, Kevin took out the all the covers and back seat to treat the fender. After putting it back they look exactly like new, like there is no evidence of the covers being pried open. In total he took out 5 covers and back seat. So should not be any issue with workmanship. If you are worried i would suggest go on a day where there is not much customer and you can inspect the work your self. I did it for my 2 cars and it was superb watching them do it and did not even need to supervise them during the reinstalling back

For the price i paid it very much more professional that the other vendors i have been too

Oh, ya we are more worried about this too then the owner of the car~ All cars we try to remove and reinstall back properly. I did civic fd on the pillar before , its quite easy to remove and reinstall. nothing special also, unlike Peugeot or KIA cars, then really have to be extra careful as their clip are very fragile compare to honda or toyota.

hi, can quote me the price for Nissan Livina X-Gear sound proof and chassis foam package?

Thanks.

Hi Kevin,

I really not sure on what you mean by sound barrier.
And your pricing and details are confusing.
Mind to explain even clear wether price is for only Chassis Foam'd car ?

Sound barriers means sound proof ? no more sound from tyre and engine ?

Did you get my PM? If not, let me know.

See you on sunday. I'll explain more when we met up.

Sound barrier is a material for sound proofing use. It filter most of high pitch noise and mid noise.
Depend on area of application, price varies.
We always use it for doors, tyre and engine noise reduction.

Hi Kevin,Im sorry i couldnt come yesterday due to my personal reason.
I wish to come over next this week Sunday if you free.

And again sorry.

Its okie bro. Was busy myself too with 3 cars doing chassis foam and one Rexton sound proofing.

Are you up for a challenge bro? This is my current car ambient. I wonder by how much the average could be reduce.

Lowest reading is when the engine is idle, no traffic.
Average reading is on crusing (read tyre noise).
Highest reading is mostly due to car passes by, traffic noise.




This post has been edited by Underhill: Nov 14 2011, 10:24 AM

hi is it working to block ekzos sound? pm me

Price for Chery Eastar 2.0 pls... TQ

Yes, I am always up for a challenge. If you record with a phone, its quite hard to record some of the noise that is bearly audible by the microphone of the phone itself. But still, challenge accepted~ how much noise can remove also depend how much budget you wanna put in. Drop by my shop and i'll take your challenge but let me know before you come, might have some cars to do if u pop up suddenly.

Yes, we can block the exhaust noise also . You'll be amazed!

For 4 doors? Or rear boot? normally we would cover the most noise part first which is the boot. Then the fenders then the doors.

hi, am interest with your package 1. when can i set an appointment with you?

Kevin,

What is Sound Barrier actually ? Its confusing.

Please sms me 016-6960886 for double confirm on the date and time available.
I tot I pm-ed you the details already? i think the my net got bit of problem sending pm, sound barrier is a material used in Lexus and mercedas , now KIA also for their stock sound proofing.

icecube, can u post up the sound barrier material picture?
btw, dashboard treatment is how? u do below the dashboard or the firewall there?

we want picture of the sound barrier ...

This post has been edited by makaveli: Nov 19 2011, 09:40 AM

bro, if i only want to do 4doors for fiesta how much ya?

or 4doors + front fenders.

thx

I owe a Vios and my car has vibration sound on front seat belt pillars, doors and dashboard.
Is it ok for me to take package 1 and could you pm me the price?
Is there any risk for the ultimate sound barrier? how effective it is after installing the foam and will the problem comes back after the installation?

Dear Kevin,

thanks for helping out with the humming noise from the rear yesterday with my MYVI,

Appreciate it and hope to get the further soundproffing you recommended.


thanks n kind regards

Hi Bro,

I did the undercarriage + rear foam already. Which part would you recommend to soundproof if I want to reduce the engine and tyre noise?

Price?Thanks.

Pm-ed you the price.

Please drop by so i can rectify the noise before suggesting the solution and pricing.

You are welcome bro. Glad to solve any noise , always a challenge.

Hi bro,
Pm you already. Engine noise can be significantly reduce by applying the STP Hood Solution and for tyre noise is the STP Mastic . Pm for price~

Hi, can I have the price of Honda insight modulor bodykit? And can i have your address too? Thanks.

bodykit? Sorry but i dont sell any bodykit , bro.

Sorry wrote on the wrong forum.

Oh, okie. Check out our new package for 4 doors with rear boot from RM650 only!! 4 layer somemore!

PM me for my naza ria.

TQ

UGPM~ let me know if anything.

Can you PM me for toyota altis old model. how long will this take and any warranty?

Hey bro, mind to elaborate wat is dashboard & rear boot treatment?

We treat the upper dashboard and rear boot with a special material to reduce engine noise (dash treatment) and rear echoing sound (rear boot)

boss, proton wira for your rm650 promotion, can it be done? how long usual for the installation takes?

Yes boss, can be done. 2 to 3 hours plus to be done.

Pls PM me for MPV. TQ

Boss best price fr saga flx? and when will u reopen since its chinese new year. No special price?

Open on this Sunday onward... Pls SMS to book the time slot . Thanks bro.

016-6960886

Kevin

Hi Kevin, can you pm me the best price on soundproof and chasis foaming for satria neo?
since my ride only has 2 doors instead of 4...

also i have 2 rolls of superlon....can it be used?

This post has been edited by AjAx: Jan 28 2012, 02:34 AM

Hi bro,

for Satria neo, its RM300 for the chassis foam.

for the sound proof, drop by and bring your superlon and see what we can do with it on your car too.
hopefully its enough. but no worries, we have superlon also at my shop.

Hi Icecube,

Your 650 those mat is not STP right?
If i were to choose the 800, add up the floor what will be the total price?

Yes, the RM800 is with STP as listed.

The floor package with STP Gold + STP VBT = RM850.

So , total RM1,650. If do both together, drop by we give you a special price.

bro, i'm back for "another poison" of urs after a year, i'm myvi owner, wats ur recommendation to treat this 'tin milo' myvi from tyre noise and external voice? doors and fender? doors and boot? floor? pls send me a package quote... if 'chun' price, i'll come on the coming weekdays

Bro for Forte, seems like the front and back door have some vibrating sound. Can the sound proofing handle the vibration as well?

Pm me the price and how much for the front bonet?

Thanks for the support bro~ Time for more poison for other treatments! hehe.

---

Added on February 24, 2012, 3:57 pmThanks for the support bro~ Time for more poison for other treatments! hehe.

Do drop by and let me check on the vibrating sound. It can be solved with sound proofing material , but only with the correct method and material.



This post has been edited by IceCube: Feb 24 2012, 03:57 PM

its time to share my pleasant experience wit bro kevin
well, i'm a myvi owner, today i went to find kevin @ around 11am, i did "Door" & "Fender" treatment until 4pm+.
from cheras back to sg. buloh, i realise the 'roar' from the road has reduced so much! it's a peace of mind for long hours of drives, well it din reduce like 90%, i would say it's 60%, it's not product failure as my tyre is the famous-road-roarer Yokohama C drive due to its wet-handling characteristic. but no more roar from this 'tiger' =D
the sound of door closing (i keep open/close my door to hear the sound LOL) and external sound reduced so much until i nid to lower my pioneer type-r volume. (IMHO, i nid to tune up my woofer bass)
My car is no more tin-milo, its much pleasant to drive, wat others said is true, kevin don't treat those voice with just 1kind of material, that should b the way!! keep up the good work bro!!

Hi, suggestion for my wife non existence nvh p2 viva at all, really loud until thinking wanna sell this car , what will u do to improve the nvh and cost? My place near to u so can drop by anytime if price ok and definitely improve the nvh, even the rooftop really like zinc when rain drop...

hi bro... may i know appx how long will it takes to install the mat?I'm driving a SAGA BLM.

This post has been edited by synex: Mar 25 2012, 12:50 AM

just soundproofed kia forte koup using STP gold and STP mat.. doors now feel so solid!!! really better feel than german cars d hahaha.. thanks kevin! SEE U SOON for another poison ;P HAHAH

Bro, for vitara 2door is d same pricing for myvi type car?

And normally takes how long?


This post has been edited by daiboken: Mar 24 2012, 06:25 PM

3 hours plus minus.

thanks bro! of coz very solid coz original cars is all empty or small piece only. make a huge different for door closing noise and more solid.

vitara not same price. please drop by for a proper quotation.

usually 2 to 3 hours if 2 doors, or 3 to 4 hours if 4 doors (usually faster then estimated)

PM me price for proton savvy

eveyrbody got pm!

bro for neo how much?
izzit half the price of normal sedan..cz it's 2 doors though..hahahha
pm me

bro what's the package for myvi now? still the same as above? pm me thanks.

bro, forgot to ask u abt dashboard treatment d other day while at ur shop. can explain to me a bit tru PM? thanks!