You'd probably lose root. Dont worry too much. For now, root ur phone and enjoy it to max. You can always flash stock ROM back later.When ICS comes out, somehow someone will figure out how to root it then ( if its not already known now).

So go ahead. ENjoy ur rooted phone.

just back up ur personal stuff like sms , contacts and apps. there are tonnes of apps for that. including titanium backup.

U can always flash ROM. some people do have full rom backup. But i've never needed it...so.

Go read the instruction for Juffo properly in xda.
Its impossible to mix up.

Put the zip file in ur phone mass memory ( the built in memory - SD card) not the external card.

U are at wrong subforum. Go find one thats only for I9100. We cannot suggest to u any kernel to use.

But basics are same. U can use other rooted kernel to flash over. Since u now have root access, install K tool ( go find in market) and u can try out a few kernels without using Odin. Learn to use K tool . its fast. Just transfer over the Zimage into ur internal SD card and try. But make sure the Zimage come from kernel for ur phone.

But i doubt r kernel is causing ur display not to be vibrant. Really (!!?)

Anyway, u can always flash back stock using ODIN. Just ensure u know what u are doing by checking out the relevant forum for ur phone.

Good Luck.

Yes.go ahead and try kernels.the best battery saver kernel I have used over stock Rom is superkernel v 1.1 .on outset its governor is "powersave "

For battery life u can also get into setcpu and juicedefender .see post 817 page 41 .

If there is time I d try put together a guide.I agree battery life of 8 hours is no go.I don't like extended battery or spare battery or carry around charger too

For flash kernel u can use creezalird guide.look at his signature

If u find lag with powersave go for conservative .some folks say powersave lag though I don't see it .conservative is ok to for battery saving. Read up setcpu user guide .all the best

Anyone manage to connect to KIES when using SUPER ROM, any version. Used to have this problem before, now after being in stock for some time, flashed with superROM v 2+ samsung apps 1.1( the one left out) +ICS theme...cannot connect back to KIES. odd.


---------------------------------------------------------------------

Odd. Resolved by clear dalvik cache. Now okay ready.

This post has been edited by premk71: Jan 24 2012, 08:35 AM

Yes obviously

Yellow triangle easy.... read the guide or see few pages before.. already got stock DZKL3 kernel...can flash over after flashing with rooted kernel. But Binary counter....for now no way...

Sure got some crazy guy to try one even already mention high risk. There are many here. Just hope they dont come back and ask for solution after brick the phone.

Actually,i used both DZKJ2 and DZKL3, not much different. If people worry about binary counter, they should stick to KJ2.

Or go try the galaxyROM RC2.... i am using it now, so far so good.

come on fauzi..... be the first.... we support your adventure from the back.You can do it.....

Ha ha .sorry I was just kidding bro .I also on same combination like u .so far so good.juicedefender auto disable fixed by uninstall n reinstall .looking forward to finalized release

---

Added on January 26, 2012, 7:25 pmSo far kl3 cannot be rooted with doomlord .pls read last 12 pages.u can flash rooted kernel .also got way to remove yellow triangle but no SAFE way to reset binary counter.(thanks to creezalird info).
If that bothers u pls downgrade back to dzkj2 or some other custom rom .many of us now excited about galaxyRom rc2. Read up a few pages back .good luck

This post has been edited by premk71: Jan 26 2012, 07:25 PM

Glad to see ur patience to still answer man....

Boy, oh boy..... " purchase" ........ with "....."

---

Added on March 5, 2012, 11:45 amRegistered your phone with www.samsungdive.com ? know how to wipe your phone remotely? of course pin, pattern display is first level protection, but ur SGS2 can be wiped remotely...,

This post has been edited by premk71: Mar 5 2012, 11:45 AM

Sorry to read this and to ask, which provider are u on? This is first time I am hearing drop calls when switch to H.

About the using *#301279#, I did the same thing on my phone on Maxis, and no H come on back even though i was using it for internet speed test ( my build.prop has a ro.ril.hsxpa=1 when i tried this)

Maybe u can try to add a ro.ril.hsxpa=0 in ur build.prop file to keep it to 3G only.

I read stuff here.
http://forum.xda-developers.com/showthread.php?t=837716

All the best.

what is ur specific problem? pls give details.
Have u read creezalird's guide? If u not sure, look up creezalird, he is a forummer here and look at this signature , there is a link to his guide. Most complete guide u can find. If u use that, sure no problem.

I think u are having problem because DZKL3 is not rootable with normal Doomlord method.
I suggest you
1.Downgrade back to DZKJ2 using ODIN.
2.Then root with Doomlord.
3.Install Mobile Odin
4.Download DZKL3 firmware.
5. Download superatmos kernel 2.1.1 ( based on DZKL3)
6.Install K-tool and use it to flash superatmos kernel 2.1.1
7.Use Mobile Odin to pre-root and install the DZKL3.

And u will have a DZKL3 that is rooted and also able to use KIES to check for updates

Of course if u have USB jig u can skip some steps like # 2 and straight away flash superatmos kernel 2.1.1 and use jig to remove yellow triangle and binary counts.

Try the above. I used it as well. Running rooted DZKL3 now with CWM recovery too.


If u wondering where to get all the above, files, join this group in FB
http://www.facebook.com/#!/groups/203703389724143/
and look up their docs. All the best .

---

Added on March 13, 2012, 1:50 amFirst I suggest as per the other good forummer suggest. Install Better Battery Stats to understand what is eating up your battery. I think its some kernel wakelock or partial wake lock

http://forum.xda-developers.com/showthread.php?t=1179809

There is a free complete edition there.

Once u know what is causing it, its easier to troubleshoot and fix.

Also may i recommend u to use

1. Juice defender Ultimate - u can find many articles on how to set it up. Some people say it doesnt help, but if u got ur data on all the time, its a good tool to enhance ur battery life.
You can refer here for a start on how to set it up but feel free to experiment
http://www.villainrom.co.uk/forum/threads/...-ultimate.4872/

2. CPU Master Pro from AnTuTu. - i find it better that setcpu, which I had bought.:-)


I think there is some kernel wakelock that is causing ur problem. But yes, calibrate your battery and give it a try for 1-2 days before usage / battery life can be stable. Sometimes, even weak reception of signal can cause battery drain....




This post has been edited by premk71: Mar 13 2012, 01:50 AM

If u have a USB jig, then u can go ahead and flash superatmos kernel. Use the jig to remove yellow triangle and binary counter. If u dont care about the yellow triange or counter, then USB jig doesnt matter.
Yes, sometimes doomlord just doesnt work. you can try memory crash method. Restart ur pc, kill every single process that is associated with mobile phone that is runnig in background on ur pc, e.g. adb,KIES, modaco, android injector etc etc ( see ur task manager in pc).


The put ur phone in debugging mode, open enough programs on the phone to keep the ram at 500MB ++ connect to pc and run the doomlord batch file ( run as administrator) and give doomlord a go again.

Since i have usb jig, i just flash kernel directly.

Have u got any cpu limiting software like setcpu or cpu master on? Usually i'd face this kinda problem when set to powersave governor on some ROMs. Usually that's the thing. Now I limit myself to conservative governor and not try to squeeze the daylights out of the battery. Also any conflicting controls on ur cpu? e.g u have JuiceDefender and also SetCpu/CpuMaster controlling the same thing?

I have tried many custom ROMs, eventually all of them will have one issue or the other. hence i am back and happily using KL3 deodexed and make my own tweaks there.