pixel wise, the density of pixel on sensation is higher than SII, infact it is almost as high as retinal display...the reason why it seems longer is because of the aspect ratio. Both of them are actually 4.3'. The aspect ratio for sensation is 16:9(QHD) while SII has 16:10(WVGA)

---

Added on January 17, 2012, 3:28 pm

class determine the transfer speed. If you are into Full HD movie recording, then you probably need a faster card, if you only install games, or just listen to music from your card, then class 4 is more than enough.

as for the 64GB, according to this LINK, sensation should have no problem detecting it

Urm, what I mean is the area of screen for a wider screen is more than a longer screen.
S II has a larger area than Sensation. You can try doing some math.
I believe 64GB shouldn't be a problem. Android(Linux) can understand 64GB card. (though you may need to format the card to FAT32). When your games for example are installed in your microSD, having a higher class is definitely better performance.
I was listening to music the other day and playing a game off the microsd the other day while downloading an app, the in-box class 4 microsd can't handle it. My music paused and jerk all along.
Get Sanyo Eneloop. I don't want to do advertisement but lots of forummer selling and it has been used by many people(LYN forummers)

---

Added on January 17, 2012, 9:06 pm
Area wise, S II is larger. A wider screen will have a larger surface area. Try drawing out on a paper with different aspect ration and you will realize it.

hi guys, i need some help here. At first my gf sensation wifi is working fine. when she tried to update the firmware it fail to update and keep re doing it still fail.  now she unable to online even though the wifi is stated connected. what is the problem with it? pls help and many thanks =)

Use Patriot 32GB Class 10 nia... its like running on ron97 V Power

i'm using 16G

Kingston Class 4 16G

writing: 4.8
reading 15.0

second test: 4.4/15.8

Problem solve, due to her lagging modem after restart no problem edi XDDD
anyway thanks for the suggestion =)

My original Sandisk
Writing 5.8
Reading 18.9

2nd test
Writing 5.2
Reading 19.2

WTF !?

Every disk behaves differently, as long as it achieves the minimum rating it should not be cause for concerns. Class 4 =  Minimum 4 MB/s write speed. If it writes faster then you have a good card.

For those considering getting Kingston, I would advise against that brand in terms of MicroSD cards, I posted some links way back about their production quality from their plant in China, there's a few major issues regarding their chip production. For the time being Sandisk would be your best bet in terms of quality.

I'm not sure if any of you noticed, but if you look around lowyat forum for those selling MicroSD cards, you will notice that Kingston cards sells for a considerably lower price compared to other brands. Not sure if this applies to computer stores though.

Just my 2 cents.

READ ABOUT THE ISSUES WITH KINGSTON and decide for yourself.

EDIT: For the time being the site above is inaccessible as the blog creator is protesting the SOPA and PIPA, as with Wikipedia English and various other sites.

I applied the IDefense Pro Screen Coverage for my XE last night, after that i left my XE dry overnight. This morning i turn on my phone i got some wet mark under my screen  . Will the wet mark disappear later on ?

For other things should be okay, just particularly MicroSD and maybe USB Flashdrives. Personally I'm using Kingston RAMs and a few other storage cards, never had problems. Lifetime warranty for me is not really an issue, because if your item functions properly in the first few months of usage you're probably not going to have issues with it in the future. Besides, it may say lifetime warranty, but terms and conditions of claiming warranty might be limited, not sure about this but best to read up on the terms and conditions of claim. Besides, you're not really going to use it till you die right?, most probably after 3-4 years you'll be using something new and better.
It does cover the whole screen very well, and since it is wet application, it sticks to the edges. Unfortunately for my case I was not happy with the product itself, Its probably a good/okay knock off of Zagg Invisishield, you try and visit the website, all it shows is the contact email and nothing else, looks pretty dodgy to me, and the pictures used by forumers selling the product is taken from Zagg Invisishield site.

First problem was micro-dust and lint, unless you're applying it in a steam room with high humidity to make sure no dust or lint or particles in the air, the stuff will stick to the protector when you peel it off the plastic and before spraying the solution on it.

Secondly, it gives an orange feel effect, greatly reduces our Sensations awesome touchscreen feeling.

Thirdly, you will still see adhesive marks (lines) after it has dried and trust me, if you're a person that can't stand your screen not looking nice and shiny when the screen is off, you're gonna be very disturbed by the many small imperfections.

Fourth, there were some imperfections on my first SP, had it changed via warranty claim, the replacement had the same problem, applied it, was not happy, took it off and poke with fork (it does resist penetration pretty well) then threw it away. Went back to HTC specialist store and got the clear OEM SP (FYI in Kota Kinabalu that piece of plastic costs RM40-50). It has bubbles on the edges, but I can live with that, since it's barely noticeable because I'm using Case Mate Tough which covers the edges of the screen nicely.

if htc sense fc, try to check if any app installed at sd card, if so move them to internal memory. this reported solving the htc sense fc issue.

no offense but you can curse me for being stubborn to stick to leedroid despite slow update, his initial release on android 4.0.3 has not giving me a single htc sense fc after running of 27 hrs.

once he tweaks n adding his mods...  gonna be supersensationalllllll

btw, bear in mind that some of the app isnt compatible with ICS yet, it's not ICS problem.

@celicaizpower:
my 1st experience with ICS (4.0.1) is the changed of display / interface at setting. if you try aosp ics roms, you'll find it is a totally different experience. simple and straight forward. now i am back to 4.0.3 with sense 3.6, perhaps it is much easy for me to pick up the change of interface as comparing to GB

i personally thinks that htc sense is somehow spoiling ics a bit by integrating sense in it. ahh.. i cant live without mail widget.. so.. cant ditch sense for aosp yet

Guys.. quick question here..

I'm about to buy a used HTC Sensation XL shortly..

I need to know, how can i differentiate between the original Beats earphone and the fake one? i need to be cautious, because its a used item, i'm afraid if the seller take out the ori Beats and replace with a fake one.

Why don't you try Virtuous Inquisition v3.0?There's very little (non)Sense left on it,runs smooth and cool as well.

Hi, i just got my new Sensation XE today..

but there is one problem, the bottom part of the phone (near the "menu" and "back" button is very hot when i turn on wifi or charging.. anyone got this problem??

is this defect or what?

Bro, i used to have Desire HD, but don't have this heating problem at all.. that's why i am a bit worried..

If most of the Sensation owner have this issue, i guess is not a problem, just afraid only mine have this problem..

Running on Leedroid supersensational V6.0.0-ICS for more than 12 hours, very smooth and nice, battery life also improve from previous V4.3.0.

Defender is super addictive until I sent my phone in for repair and had all my data wiped.

It happens. Desire HD is Single Core
Sensation is dual core
Most dual core phones will get hot. Nothing bad will happen, Don't worry.

My Sensation XE heating problem is at the home button area, not at the back. I noticed it will heat up after 15-20minutes after i on wifi and go Android Market for "shopping", however no heating problem if i on wifi and leave it idle..   
maybe like what bro Deathsongx3 say, is dual core proc running too fast.. 

so u suggest i send it back to check, probably can change a new unit? because only one day

the display does get warm, its normal. kinda like how lcd tv screen generates heat as well.

but if its frying your fingers, then thats another story.

I feel that HTC aluminium body more easily to get scratched compare to plastic body of SGS2 despite the body is stronger as made of aluminium.

Not any part of the screen, only around "menu" and "back" button..

And the difference of the temperature between idle and running is quite serious.. I will bring it back to the seller later..

I went back to the shop, the sales girl say it is normal to have this problem, i almost fainted but she said come back on Monday, she will ask the technician to check.. btw, i am in Cambodia, i bought this unit in local shop, is the warrranty different? 

i tried to email htc.com, pop up error " internal server error", speechless.. 

---

Added on January 27, 2012, 3:32 pmand printed on the box "Made in China" !!!