Red = air cond hose/piping.. Blue = O2sensor.. Ignition coil is located right on top of the engine..

cut the plastic panel beside the foglamp la. black plastic there also no use then put cai there. 
I wait for boss to say only klee/hammie ?

If u cut the plastic panel next to the foglamp, ur foglamp got nothing to support then will fall easily lah. Futhermore if u put it too low to the ground, when heavy rain/a bit of flood u risk the CAI sucking in water into ur engine bay. That time u prepare cash for total rebuild/overhaul lah.

where is the ignition coil ah?? XD
i notice u wrap up something at near the brake fluid there the pipe??
wat is it ah??

True what + fully chromed Lamborg
How did you smoke yours?

u check it while the plug in and turn on light...... if your meter light also gone it should be burn fuse aldy , always try don't check whatever equipment when it connect to the car it will have chance to burn our ECU .....since nowdays more electronic item in the car .....are u sure your center console know faulty aldy ?

In the black box located at the right top of your engine bay.

now is too dark to check liao...try lookunder the steering near the door fuse box there or inside the engine fuse box i also dunno which one but try pull out and check don't pull out the ECU , btw car accesories shop can help check also tomorrow sure got one is open.

P shape rubber? thanx 

guys, wanna ask about disc brake conversion..

can we convert our PE using evo3,wira rear disc brake?

http://www.mudah.my/Disk+Brake+belakang+La...G91-7251570.htm

No trade-in value. I used my previous Conti Contact 1 till my front worn out becoming semi-slick tire while my rear tire becoming near F1 tire. No patterns at all lol  The CC1 tires lasted me only 30,000km Hope Michelin XM2 last me at least 40,000km

I changed in Melaka 

yes it is 128 now I wanna buy 1 to keep......

Esso FTW. Another Esso supporter. Don't kacau Maivee lah. Let them turtle by themself.
Why cover only ah?

what? u wan me to scan page by page ah?

kesian me 

I want the centrespread lah.. hehe..
Ya lah.. But too bad extra 20% of the movie price will be going to the gomen to fund their next belly dancing trip to saudi arabia later..

kepada yang hamsap hamsap;

when is your next TT?

sumua mau tengok centerspread, I cannot selfish oni see myself de mah

I am not a fishmonger, I no selfish one.

i also think like you, thats why i buy 7.90/pcs at diy shop , but it last 2 week then start jumping when sweep .

---

Added on October 10, 2011, 7:06 pm
  but it was 2 door car only.

Ummm the shop used to be along National Semiconductor/Infineon Batu Berendam road there.
Corner shop beside Sungai Putat. Then they relocated beside Giant Hypermarket, same road as Nasi Padang Kota.

Those install the chassis foam...how izit? improve or not?

I am unsing denso now, I buy one to keep since it is good price if any one ask me to sell i will sell it at 160-180.....  
jump alot lah , like hitting my wind screen ....i buy fro Mr. DIY also 7.90/pcs brand GAP...
How is your centre control unit ? and the meter illumination light.... repaired ?

---

Added on October 11, 2011, 10:37 am
you can make friend with them actually, they can help you success in your courier in the company.
lol....how u wanna send regards, Xan will tell them "Hi bro and sis, Lee miss u much, if got time go find him lah" .......

"Hi bro and sis, Lee miss u much, if got time go find him lah" .......
sit "ON" his car......

  This the the best thing that can do by Persona......

---

Added on October 11, 2011, 10:47 am
that is only the cheap foam that no so hard as compare with KL auto foam, but some said it is good to not so hard, so the car will not feel so bumpy.....but generally NVH got improve (you might not feel the silence if your muffler and extractor modded to blast sporty vroom), and conering was more stiff. Can also getting Sam and Vccy review on that.

I've paid my down payments everything for one week. The SA said, now the cars stuck in Tg Malim there and cannot release the car yet due to that place screw up with some records. Till now, I still can't get my car :'(

hmm...judging from ur spark plug color and condition it looks like my normal SP from the SC that is overused. i tot denso SP lasts??
how long have u been using??
sometimes u never know whether it is caused by the SP. (it will be normal for ppl to say that when ppl say the problem is spark plug u will say u are using denso, sometimes denso spark plug also might have error just like even a lambo can burn down or a bmw can have some defect during manufacturing.)

Pertaining the water go in from the front door i also found it this morning after rain but it was not overflow in side my carpet,
[attachmentid=2480918]
i found that it was because the water came in from the door rubber that look too short to cover the from edge, if stick another 3 inch rubber to extend wil it be better? but where to get the exact type and size of the rubber?
[attachmentid=2480919]

is the ori one is p tube ? after stick on will it look same like the original?

my second picture tell wat to solve, just looking for the same rubber to stick on.

Then is better install piggyback.plan to change d muffler to ori on next month.maybe midbox oso use bec ori.nw prefer comfort drive.

What happen...why....just only said the car not enough speed, but now wan demod....

Since you have change the extractor, if you use back the original midbox and muffler the "tin kosong" sound will appear, that time it will be more noisy.

I'm wondering, if we use thermal wrap at the extractor, will it eliminates the empty can sound? Hmm..

Guess I will use back my Denso SP...just ask the workshop to clean it back only right?
Same also..thinking what oil to use...but oil man use Petronas synthium wor..thought of trying...i asked CoSE yesterday they selling for RM103 semi sync

Powarrrrrrzone!!!!!
the empty can sound not coming from the extractor, extractor normally not produce any sound is the mid box, bullet that make the empty sound.

hmm...so it is not recommended. arghh~~i hate to find shops to mod. they always give me all those faces that i am a kid and they think i dunno anything and no money so dun wanna layan me. so at the end of coz no business for them also lor.
hard to find a shop that have good customer service and quality. damn.
yup. aiming for it too.
but hotbit is the best or there is better??(if not comparing in term of price)

i know a bit Hakka not Hakka at all, Lim Peh Hokkien Lang
Diaoooooo!!!
Diao=Diao nya gai diao lor.......
Zeng propose to take over the Toyota spare parts delership.

this carbon fiber intake system is for wat geh??

tak tau also.. better air intake? haha

Just came back from seeing skypee83 whose selling the p-shaped rubber stuff.. He installed at 1 door for demo.. It seems that the door become too tight to shut.. Maybe need to adjust a bit the hinges.. The seller also driving a persona..

    yalo don't want lah Maivee club is there oso 

Nasi Lemak 2.0 also highlight oredi.

Heh. U got hangout at Starworld casino High Limit Zone during weekends (friday, saturday, sunday) before? Makehaiiii.... The PRCs there.. Hot till ur boner also can break ah.. No kidding.. Everytime I pass by that place I sure end up with a boner wan.. Kns...

---

Added on October 13, 2011, 11:49 pm

Laugh die meee...

nobody want mod car this month?

Vccy, your car is auto/manual?

Why ur stainless Steel air filter no good?

Atf cooler is to improve what?

I still thinking apa mau mod , coz budget aside 1.2k for ICE.

Extractor SS also ready RM780 , carbon air intake 499... pokai d.
Then see crank pulley.. adui...
Okay lo can survey survey... hahaha... but mana survey dulu?