Mar 12 2012, 02:24 PM
Makita Rotary Hammer/ Combination Hammer with AVT
HR2611FT - comes with Quick Change Drill Chuck
• Anti-Vibration Technology (AVT) actively counteracts vibration of tool for greatly reduced transmission to operator
• Torque Limiter stops bit rotation if bit jams for increased operator safety and enhanced tool protection
• High Durability design with Zig-Zag Armature Varnish, Enhanced Sealing, Improved Impact Bolt and Impact Reducing Cushion Ring
• Reverse Rotation System using Brush Holder Unit provides the same amount of power in forward and reverse and extends life of carbon brushes
• Improved Bit Guide for increased bit stability during drilling applications
• Re-Located Operating Mode Lever for increased protection and durability
• Variable Speed Trigger allows operator to adjust speed based on materials or application
• 40 Angle Bit Positions enable chisels to be positioned at optimum angle of operation
• One-Touch Sliding Chuck for easy bit installation and removal
• LED Job Light illuminates work area
• Ergonomic Soft Rubber Grip for vibration absorption and comfortable operation
Bit Type : SDS-PLUS
Capacities:
Concrete : 26 mm
Core Bit : 68mm
Diamond core bit (dry type) : 80mm
Steel : 13 mm
Wood : 32 mm
No Load Speed : 0 - 1,200 RPM
Blows Per Minute : 0 - 4,600 BPM
Impact Energy : 2.9 J (2.1 ft. lbs.)
Vibration Level : 10.5 m/s2
Noise Level : 90 dB
Overall Length (with SDS-PLUS Chuck) : 385 mm
Net Weight : 3.0 kg
AVT Techonology demonstration & introduction
This post has been edited by jeffreylam: Mar 12 2012, 02:29 PM
Quote
0.0769sec
0.53
7 queries
GZIP Disabled