Planing to rob a bank

How thick is the wall you plan to drill? Hand coring is not going to be easy.

then any rotary hammer can do the job.

lol...he probably want to rob an ATM.....lol....

Hi all sifus, i need recommendation.

I plan to drill thru wall -> concrete i believe. For LAN cable laying. Kindly answer my inquiries as follow:

1. How much power needed?
2. Hand drill, rotating hammer or Impact drill?
3. Any brand that can last long?
4. Budget?
5. Drill bit. How many mm is suitable for the LAN cable to go thru?
6. Which dealer is goodingz?

http://csmhardwarecity.blogspot.com (here u can get A -> Z items)



This post has been edited by Xploit Machine: Aug 26 2013, 01:49 PM

normal hammer drill for concrete kenot la.. very tough...
just watch the vid posted here by TS.. it is on the 1st page 1st post...

get rotary hammer...

This post has been edited by H2D: Aug 26 2013, 01:53 PM

Hmm bro,

i not using any case.
will not have this cap

So if Makita HR2470, what is the current price for it?

The second tool he is using very powderful yo!~

not the RJ-45 cap / case .. i mean the cables u will be running in a PVC case or else? impact drill enuf not rotary hammer

Nope. Runs Naked. I plan to get the drill that versatile to most of all the situation that for DIY job in house. One of my hobby too to DIY my cabling and all sort of fitting. So i wanted to know which to get....


Hitachi Rotary Hammer 2 Mode, 800W, 24mm, 1050rpm, 2.3kg DH24PB3 this seems sexy and the price also good too!
Makita Rotary Hammer SDSPlus 3modes 780W 1100rpm 2.6kg HR2470 more exp @_@

So which one better?

u wana diy one time, or u doing biz?

u wana drill 'tebok lubang' on concrete or install plugs to lay cable??

now cap ayam rotary oso very cheap liao if u wana use it one time...

wana find out price just call the hardware shop , or google online, for csm, ct etc etc..

not sure exact pricing, even for DIY and business purpose we run SKILL 500W and Bosch 500W impacts sufficient unless im using rotary hammer for larger holes and breaking wall purpose

usually, i just use wall type C-clip rather then drilling, install plu n screw .. to much hassle for naked wired, else i just use normal impacts to installe white PVC case to run 5 or 10 cables at a time

Drill THRU concrete wall to lay LAN cable. I also like install plugs on wall.

Cap ayam not dare use leh.

Hmm, i hope can get 1 in 200~300 bucks. RM400 bucks is a little tight budget for me.

SKIL Rotary Hammer 3 modes, 550W, 1550rpm, 2.2kg, 1715 enough for the job?

its a good deal

cap ayam alot of ppl swear by it oso, if u r not pro n dun use it everyday...
the cheapest 'branded' with back up is DCA...

skil tho cheaper version, it has back up frm bosch, their service is good, so u no nid to worry...

umm umm. i will go check out. See which i can get la. I now know why i can't get the drill into the wall ad....rupa rupa nya, i need to use Rotary hammer.

Really not dare to buy those leh. Think i just get SKIL la. Or save more money get Makita HR2470.

200-300 RM only can buy 2nd hand bosch drill.. new one is about 750RM

2nd hand ar? @_@ I think i opt for SKILL or Hitachi la....do the research....

MAKITA 2470 RM550 can get. If sales price RM460 lor....
SKiL 1715 RM300
HITACHI DH24PB3 RM380

Bosch too exp...no dare to think as i looking for some entry level powderful to drill tru walls. got any lubangs?

rotary hammer cannot drill 180mm...

this is getting really confusing.

Actually, 180mm is for kitchen ducting hole and the other 4x 100mm is for exhaust fan exit. Thinking of buying this drill and pay 2 workers to drill for me...

The wetworks contractor is charging me RM 200 for 180mm and RM 500 for the other 4x 100mm holes... If I buy this drill and bits around RM 700 also... But I pay the workers la... N I keep the drill