Hey sup guys

I want to do my first PSU sleeving, and I got a few questions to you experts

Well, I need to know the sleeve size for the ATX and also for the 4-molex pin wire. Will the sleeving look nicer if use different size, or practically more or less the same? The ATX pin does have more wires compared to the 4-molex pin (obviously 4), so I need a sleeve size recommendation for both ATX and the molex

And also the heatshrink size

****I browsed through these threads, may be purchasing from them
http://forum.lowyat.net/topic/314238
http://forum.lowyat.net/index.php?showtopic=327972

This post has been edited by :3mushy:3: Aug 30 2008, 10:47 PM

Sleeving Size :

For Sleeving ATX = use the 12mm Sleeving
For Heatshrink ATX = use the 25mm heatshrink

For Sleeving Molex,Sata,FDD,6 pin and 8 pin GC = use the 6mm Sleeving
For Heatshrink Molex,Sata,FDD,6 pin and 8 pin GC = use the 10mm heatshrink

Whut PSU u Gonna Sleeve it? If Got Long Cable like Huntkey PSU, I use This Measure :

For Sleeving ATX = use 1Metre (for caution if not enough) 12mm Sleeving
For Heatshrink ATX = use 20cm (if got mistake can cover for it) the 25mm heatshrink

For Sleeving Molex,Sata,FDD,6 pin and 8 pin GC = use bout 5Metres (for caution if not enough) the 6mm Sleeving
For Heatshrink Molex,Sata,FDD,6 pin and 8 pin GC = use bout 1 metre (for caution if not enough) the 10mm heatshrink




This post has been edited by MildLO: Aug 30 2008, 11:20 PM

Hey thanks a lot~

FYI I'm using CoolerMaster Real Power 550w

another info,if u rajin ,u measure for each of your cables length(sata,fdd,molex) (ATX) and write it down,calculate the length,so u can know exactly how much u need for sleeving and heatshrink, better u get more sleeving lenght for caution if not enough,i dunno how long cables for CM real power 550

Off topic :
Got Bendera at My name,

This post has been edited by MildLO: Aug 30 2008, 11:28 PM

what to do after this? how to take out the wire?

Yes, just pull it out.

ya,just take it out,very2 easy one.hehe

gud luck in ur first sleeving attempt then

ok...m lazy to read liao...btw...y sum ppl sleeve looks so loose and some so fit and tight?any reason?or any technique to do so?plz guide me

tight is definitely better. why would you want to have a loose sleeve?

measure it nicely,cut it,use zip tied(dunno how to spell it ) at the end of each sleeving to keep it fit,use heatshrink to cover it,done

how much is the vantec molex kit and sleeve kit?

it's difficult to find vantec.
vizo cost RM35 in sricomp.

buy from forumer la..very cheap and u can mixed with any kind of sleeving and heatshrink color too

u can also buy sleeving in custom length for your PSU

This post has been edited by MildLO: Oct 15 2008, 12:43 AM

not just cheap

the quality is better

got more colors of choice

especially the mix colors thread

Hello, where can I find coloured sleeves? 3mm,7mm, 12mm? thanks

go to garage sell,using the search button, type sleeving, got lots of seller like xcoolpc,mycasemod,niclasteoh many more,hehe

Can find at Jalan Pasar?

i dunno,u can ask another forumer,im not familiar at jalan pasar.. ,u can buy at forumer also, i also buy from them

anyone selling 3mm Black Cable Sleeve ??????????????
i went Jalan Pasar last SAT and found nothing !!!

only came back with a lot of Heat Shrink Tube....