Been Call up Maxis customer service asking for the Public IP ..But now Both User > *****@home.maxis.com.my + *****@public.maxis.com.my ALSO CAN'T log in anymore Keep getting (Authentication failed)
Any one been try using other then Thomson TG784n Router ?? I don't see any of my Router have >> HSI(GPON)+VoIP !!

Can i change the Primary and Secondary DNS to 8.8.8.8 and 8.8.4.4?
Please advice.

you can't change it by default... you have to 'hack' the router in order to do that..

---

Added on July 26, 2012, 9:58 pmDid you call customer service?


This post has been edited by benlye: Jul 26 2012, 09:58 PM

Can anyone tell me how to hack maxis ThomsonTG784n inorder to change its dns address?

you will probably need to telnet and perform the change.

reason why you got authentication failed is because under @public.maxis.com.my do not configured your id xxxxx, so you wont get your id authenticate success from AAA server. so basically you have to call to maxis to change to public domain.

I just done my cctv port forward setting and public ip problem from a guy with some charges.
he provide onsite service.
contact him at histreamzone@gmail.com

just call maxis and tell them you need public access for the router...
they will fix for you...

here's my screenshot.. with user MaxisBB ...
i also had the problem login with Administrator ...
with the password behind my router




Attached thumbnail(s)

Why I cannot login with my access key?

i tried to setup my asus as a wifi router and retained thompson as the router for phone. No luck yet. Did you manage to setup your asus router?

Any luck with TG784n v3 Administrator password? Mine just won't allow me to log in using the access key as password.

--
Update: Okay, sorry, it seems that I mistook S with 5, tried this again and it seems to work fine. But still no way to change the DNS servers setting

This post has been edited by wiraone: May 8 2013, 09:32 PM

Maxis fiber router is very unsecure, easily can steal your voip account or simply wipe your device in a second. There is another username behind the router like Operator/Management on Unifi router.

for the username/password, its case sensitive eg. Administrator different from administrator. access key just take from bottom of the modem, also case sensitive.

for the dns, follow below command and it will never show the router ip as 1st dns again. works on mine TG784n V3. now i only get 2 dns that i set.

The default configuration uses DHCP to assign the router IP address (192.168.1.254) as the DNS resolver.
This method allows DHCP to assign different DNS settings to different DHCP pools.
In this case we use Google DNS for the LAN.
This method can also be used to have different DNS settings on the basic DMZ and advanced DMZ networks.

This will not work on computers set to use a static IP address.

Telnet Commands
Commands

dhcp server pool list (view available DHCP pools, to help choice)
dhcp server config state=disabled (disable DHCP)
dhcp server pool config name=LAN_private state=disabled
dhcp server pool config name=LAN_private primdns=8.8.8.8 secdns=8.8.4.4 localdns=disabled (set the LAN to use google DNS)
dhcp server pool config name=LAN_private state=enabled
dhcp server config state=enabled (enable DHCP)
saveall (make permanent)

hope this help...

This post has been edited by tcleng: Dec 5 2013, 03:08 AM


Attached thumbnail(s)

Thanks but solved it quite a while back and ditch the router altogether now .. using Buffalo + OpenWRT router now and my voip phone going straight to the BTU.

I can confirm that this works.
However, you will need to restart your Technicolor Router in order for the configuration to be saved.
Technicolor Gateway > Restart my Technicolor Gateway

Thank you for your sharing your knowledge, tcleng, cheers for you man!
regards

what router can i use to replace the thomson ?

Anyone can help ? I set my house cctv over maxis thomson router it said http connection failed. Is what happen? Last time using tm router no problem so easy to set.