Hi,

I tried the hairpinNAT but cannot seems to get it to work.

Mail server Virtualbox running XP with ip 192.168.0.237
RB750GL IP is 192.168.0.1
I already have Dynamic DNS working and I can access using dyndns url from the WAN side to access the POP but cannot seems to access from the LAN side. Can you have a look at the line below to see where I went wrong.

/ip firewall nat add chain=srcnat src-address=192.168.0.0/24 \ dst-address=192.168.0.237 protocol=tcp dst-port=110 \ out-interface=ether2-master-local action=masquerade

Thanks.

Solved with example from this

Mikrotik Forum


This post has been edited by jackdon: Jun 5 2012, 11:46 PM

Hi,

Currently I am on Unifi 5MB home package and using a RB750GL setup with klseet blog instruction. I follow his instruction to the dot. It works well I had add some port forwarding using the existing rules as a template. Also setup QOS using the Simple Queue.

Recently I had added a StrongVPN interface on to my RB750GL using their recommended setup.
Mikrotik RouterOS PPTP Setup it works very well and I do not have to use an additional router to services my newly Roku 3 and the old Apple TV 2.

Right now I find that the existing 5MB may not be enough as my kids sometimes does stream their own YouTube and also does some bittorrent download. I plan to upgrade to 10MB then does some bandwidth management like limiting the internet to a max of 5MB and also assign the StrongVPN to QS_1 which has a higher priority. Been trying using the existing template but cannot seem to mangle the source (strongvpn) to the right Queue.

Any idea.

jackdon

Hi,

Any sifu can help with IPv6 setup.
I have setup the IPv6 package.
At router level the IPv6 is working fine. But no IPv6 address is available for my pcs and handphone on the LAN side. Looks like the network discovery is not working.

Appreciated any help I can get here