wow RB1200

Oh my Rb751U-2HnD. It's kinda happening again. For the last 5 mins or so, I was watching the Flash process in Profiler fluctuating between 20 & 80%. Now it seems to have stopped. No entries were written to the log. Sector writes in Resources did not increase. Nothing on the network stressing the router. No downloads going on.

How is your NAT setup? and are you using Class C? Sometime Class B or A can stress the router.

If all else fail downgrade

My NAT just got 1 srcnat for masquerade and 1 dstnat for port forwarding to my FTP server. At the moment there 33 other UPnP dynamic entries in my NAT table. I think mostly BT. Traffic isn't very high at the moment.

I just noticed in Profiler, an unclassified process going from 0-20% periodically. Anyone know what this is?

I thought classes didn't matter anymore with subnet masks. I'm using 10.0.1.0/24. Yeah, I know it used to be a Class A but mine's a /24. Shouldn't matter right?

/24 should be good. Unless Mikrotik got buy treat 10.xxx.xxx.xxx as default Class A.

33 is low. I can reach few thousand sometime.

I just checked with Hunt they are free gift from the Mikrotik MCTNA Training

Rb751U-2HnD

So nice.

hope they encounter the cpu bug ahahhaa i mean the high flash utilization when they testing it out hahahhahaha

They using 5.6 right

I going to get my cisco 1921, will give it a run soon.

yeah hope they are the newer batch and not running 5.06, then they will curse ahahhaha

cisco 1921 for home use ? thats OVERKILL RIGHT ?

cisco for home = overkill^overkill for me

There's a reason they're giving that out for free. :-) More people using it the better. Hope someone finds out what's wrong with it.

What's wrong with it ?

Want to build a mini lab

---

Added on March 6, 2012, 5:03 pmI doubt it have physical h/w problem. Maybe just OS / firmware.

This post has been edited by weikee: Mar 6 2012, 05:03 PM

did you test it with 5.06 firmware ?

cpu utilization , flash process seem to makan alot of cpu time causing whole router to slow/hang/drop packet/wifi cannot connect

Maybe you'll want to find good reason to upgrade to RB751G-2HnD

rather wait for the SME class one, the red colour one.. which i pasted a few pages back

---

Added on March 6, 2012, 10:31 pmRB2011L-IN

http://routerboard.com/RB2011L-IN

99 USD

brochure http://routerboard.com/pdf/390/rb2011L-IN.pdf



This post has been edited by JinXXX: Mar 6 2012, 10:32 PM

I am going to get a mikrotik router for bandwidth control at home.
Do you recommend RB750GL?

ps: I will plug my existing router dir-615 for wifi purpose.

This post has been edited by lara_: Mar 6 2012, 11:57 PM

Not yet. Maybe later this week. Strangely my friend's RB751U is now 6days uptime. No probs yet. Also on 5.14.

---

Added on March 7, 2012, 1:41 amHighly recommended. For its price, nothing else really comes close. It's very flexible.

This post has been edited by soonwai: Mar 7 2012, 01:41 AM

you try compare settings between your 751u and his one line by line...

I hope so too. Quite confident that an OS update will solve the problem.