saw some car with it .. erm.... looks funny .... lolz

U can go EON and ask them to order the switch ... like rublik did .. around RM13x ++ ..
but it takes 2 months to arrive.. so u can order first

When i install my GT wing that time i got ask the same thing too ..
RM80 with aluminum mesh .. nice one ..
but no time to sit there and wait ... maybe next time

GUYS!!!

LOOK WHAT I JUST DID TO MY 1.8 MANUAL !!!!!





Finally !!

need more time for other things ..
need to perfect out the cruise first
trial and error and finally (thou still need to fine tune the settings)

I think green bcoz of my lousy phone gua

---

Added on September 18, 2011, 8:27 pmI think green bcoz of my lousy phone gua

This post has been edited by K3nnYkl82: Sep 18 2011, 08:27 PM

Ya.. saw tat..

haha .. bro .. i dun have the defination for the whole ECU la ..
it just codes being stored in the ECU ..
i know where SETTING data is on .. and i compare against lancer world wide .. to pin down the bit to enable the cruise...
if we wan to do other things .. first have to find a ROM that already has that something working in it.. then only can pin down the setting ...

No just manage to get the cruise function up like 30 minutes ago... i will prder together with otroman

Program wise.. all the ecu coding same. worldwide... (lancer i mean ).. So the cruise function is already there.. u just have to know which address and enable it..

once the CRUISE comes online means the system is ready to cruise. the brake switch is always active switch.. the ecu get feed back from it knowing u have not press the brake.. if u press it will disengage cruise..

Our current brake switch only 2 pin. always off @ open circuit. when u press brake .. it close so ur brake light lights up.. but there isnt another 2 pin for the cruise. thats why we have to change..

as for clutch switch.. its always off.. When u depress it will close sending a signal to disable cruise .. its ok if dun have this.. But remember dun press clutch when cruising... :-P

shd be working d
but no brake switch to test it out ... let otroman do the testing

Sure will
but cable not mine .... i already pass back to the respective owner

tada ...
u free ? maybe u can drop by EON to check it out then

8614A018 <-- clutch switch
MB435457 <-- brake switch
8602A008 <-- Cruise control Panel

that one i dunno ..
but logic thinking .. u would want to do cruising at 160 km/h ... gua ...
that one call speeding .. u shd focus .. not relax

Aiseh.. Driving 180km/h .. Sure makan abit ge lo.. haha.. Ranked heavy footed..mine 1.8 mt as well doing like average 9.2l / 100km .. self calculate.. dun trust thr average meter reading ..

Yup.. mivec taking over ma..
Summore in the ecu . going 4.5k above. proton set the ratio to be quite rich.. Extreme condition (max rpm + 50%> Load).. the AFR can go as lo as 10.2 .. Get the Obd2 reader.. U can see what is the ratio ur ecu commanded

Tratics not mine ...

The bluettooth 1 is good enuf to do monitoring..
U only need tratrix for tuning or flashing the ecu..

i doubt the SC knows how to enable our cruise as well
lolz ...
during TT a member complain that they dun even know how to reset the service reminder ...

if u dun take care it .. yes it will
but can polish back geh ...

if u dun wash ur car often .. dun take white

those woofer got long time ago jo .. power so so only.. thats why not many ppl want ...
do like rublik one la..