My cabling


Sleeved all cables except the 8-pin to 4-pin converter...so hard to remove and the sata cables.

This post has been edited by [KY]: May 12 2007, 05:44 PM

Not that quiet though. The fan on my GC isn't running smoothly and causes grinding sounds.

It's spinning only at 60%. Not much of intention of getting 3rd party cooler as the temps now are great idling around 50 degrees in air-cond room.

It's the stock fan on the GC. Even running at 60% there is the grinding sound.

No there's no plastic cover...there never was since i bought it

OT: Does all 8800GTS comes with a plastic coer at the stock fan? Mine didn't. These days i'm confused and worried because i am afraid i bought a used GC, because the shop only quoted me 1 year warranthy from Galaxy meanwhile Galaxy says their GC comes with 2 years warranthy. And i can't find my serial number on my GC.

How do i extent cables without cutting/soldering in the process(do not want to void warranthy)?

ooo nice...

I actually have some plans already but now my PSU not very right and fear may need to RMA. After warranthy habis which my rig maybe use as secondary rig or sell alrdy i intend to mod my cables. Now i currently using 2 Sata and no molex cables. So i intend to remove all the Y-split for the sata power cable, extend it, and keep only 2 sata cables directly from the PSU so that it will be neater.

Strider why?

It's long but in between the last connector on the cable and the PSU, there is 2 Y-split cables which looks untidy since i want to only use 2 of the end connectors.

Aihz...may need to remove my sleeves to send for rma

Nothing but sometimes there's a buzzing sound coming out of it and it gets loud. Since there is a silverstone service centre locally it wouldn't take a long time hopefully.

Owh i'm not very sure yet...i got my strider from moderno. Will inform you once i get an answer from him.

Sleeve the cables 1st. So that the cables will look less.

I've got a LL PC-7 too. And the cable seems to be hard for me to manage. The only possible way for me to manage nicely would be drilling holes to my case. But scared will ruin it

If i put there then my 24pin mb power cable very hard to route to the mb section.

If i were to buy a 24pin or molex connector will they come with the metal conductor in it?

I intend to make a few extension myself and if they don't come with the metal conductor inside i can't do it.

I was hoping somewhere around Subang Jaya...

Anyway thanks alot.

Do you have the name of the shop and the address? The pin is like normal 24pin or do i have to mod them?

OT: Do they sell acrylic there too?

Thanks.

Owh okay thanks.

I think he meant go in between the 2 hdd tray to the back of the case and comes out and the meeting of the 2 fans.