Personally I would not recommend 30 weighted lube for Campro without CPS, as lube might be too thin for this revvy engine. Stick with the lube viscosity within the recommended range. That is 40 weighted. Forget abt 50, I think proton just follow old and safest spec last time without considering balance of safety and fuel economy. Even SC using weighted 40 for non CPS campro liao.

Ya, for H line only at the beginning the brake a bit noisy. After that, it is quite smooth and good.
Eh, can ask Talk Cock King aka dorinyeah mah. He also using manual.
Orang Minyak say cannot is cannot. 30 weight oil viscosity is lower and your car engine is not exactly new.
So, why take the risk?

Go look at ur rear bumper at the wheel arch.. there's a screw/bracket on the part connecting ur rear bumper to the car metal body.. If u're using 16/17 inch rims, the tyre may hit the bracket regularly when there's load in ur car, or when u're driving fast over uneven surface..

---

Added on August 22, 2011, 1:49 pm
I try before mah with the Castrol Edge 5-30.. Ok lah..

Anyone wan TT? Zeng/hammie?

read it.nice entry 

Actually I also don't if W30 really can use for Campro but based on everyone here, Campro running a bit hot. And its a high rev engine rather than the FC based designed engine.

As most ppl know usually high rev engine require at least 40 weight due to it....so-called high rev nature that usually runs more commonly into the higher range temperature. Weight 30 does not do so well at high temp. Although FS can tolerate high temp more but ours only Group 3+ FS, not true FS, not so sure if 30 can withstand constant high temp.

CPS version used 30 liao. So I guess they alter the design, or cooling system and other specs to lower the temp or rpm ratio, etc. Our cam tak pro unfortuntely still recommend to use 40 and above. I had doubt abt our engine production tolerance after ckdenion and others case....so not dare to take risk at all.

yup try search back the CPS engine info, there are a extra round blue colour thing for cooling the engine oil.

---

Added on August 22, 2011, 5:38 pm
he test only 5k km mah ...where got side effect, Zeng now are using Edge 0w-30 .....?

Sob   when broken I also dunno only notice when my father told me , there's a huge crack line on the fog light . There's just line and can feel using fingernail. Would it let water in ?    should I replace it or leave it since not broken just crack . Damn I hate flying rocks 
How much ori foglight?

Wah,  Xan. Every few months you change your target. Forgotten your 159 oredi ah? Oh, maybe the Porsche is not yours?

no lah.. I'll never be able to afford anything more than 200k lo..

Er, then he will have only RM199,001 and still can't afford 200k car.

Guys,.. nah see....... tell you guys don't install aftermarket ARB nomether what braded brand you install it will spoil the original chasis this fella install 23mm ARB with adjs. absober...   end up GG.com 

[attachmentid=2400410]
[attachmentid=2400411]
[attachmentid=2400412]

Any good Service Centre around Jln Ipoh/Bt Caves/Kepong for PE service?

Nope.. Edge is 0W-40.. Campro is long stroke engine lah.. Need to use higher viscosity grade engine oil like 40.. 30 then the heat transfer onto the engine block will be too high..
He so pandai go install 23mm.. Max also is 19mm for stock cars.. 16mm is the most ideal.. Anything higher the stock suspension wont be able to take the stress.. Even Audi's also had this problem as most of their car suspension parts are made out of hard ABS plastic.. So when owners installed ARB it just simply tore of the suspension arms..
Yeah very recommended to use Magnatec.. I also used it for my 5k and 10k service..

'guk guk 'or 'kuk kuk' sound appear when cornering left at uneven road.. the sound coming from front left.. already change the absorber by SErdang SC..but after 3 days the sound appear again....car just 3 month

FFK last night.. =.=..
Then buih buih suppose to come out from the exhaust lah.. haha..
Probably u got a small leak somewhere around the tire or the tire valve is faulty and its slowly releasing air. U can go to a tire shop and ask them to check for u.. Changing the valve shd be around RM5-15 with workmanship.. If there is a nail or what, patching the tire only cos RM5 per hole if its not big. The air pressure shd maintain for at least around 1 week and above without changing.
U have to join us for TT ady.. We need to check ur car.. hehe..

Come bring it to the Klang road there.. confirm whatever hidden or not hidden rattling noise all will come out one shot.. hahaha
Hmmm is it good?? I read a few reviews and comparison for it.. It wasnt that good for RP.. They lube is good but the cleaning agent is a bit too harsh. And how much did u get it?

See how lar... If I'm at PJ cheonging then i'll let u knw..

---

Added on August 23, 2011, 2:59 pm


LOL!! 1 letter different oni.. Maybe this is Zeng's secret project

Already reach home macha... then lazy to go out again ma... need early booking only can TT..

v can view the foam 1st at his shop..then juz decide..according the comment from the user,it is good and the product similiar wit autofoam or profoam..dun wori..i will ask his sunday got open or not..if open,then u can join us..

bulk order for EA form:

1)samwongjyhhorng
if 3 car do 2gether,tat is RM180..if more than tat,still can discuss..

---

Added on August 23, 2011, 7:22 pm

my tyre is 17inch,potenze RE001..my tyre oso very noisy lo..still got 70% thread

Damn it.. after warranty only got sound 
Any solution beside replace the black plastic air scope?

i'm not rich..the rich guy is xandras lo..i bought 2nd hand rim and tyre from him lo

---

Added on August 23, 2011, 8:29 pm

ok..

bulk order for EA foam installation:

1)samwongjyhhorng
2)ngeo88
3)vccy(will attend if sunday open)

who else wanna join the bulk

if G-spot i dont mind