Won;t 5000 be overkill? I thought 1000 should be the enough?

where to buy mobil 1?

Uhh mine's ok so far.. Only not dark enough.
Maybe the setting/balancing of your power window inner workings is skewed?..

i noticed too, on all 4 windows but not scratches, more like oil/wax marks, i wipe it with damp fiber cloth & its almost gone. if want to be sure just dropby ecotint shop to verify 

I think u clean ur own right? Got let people clean ur windscreen b4? It might be rough sand orwhen wipe that time got nail scratch through...

Reverse car and bang into a Honda Civic in front of my house....really bad luck this month....first my foot, now my car....must be Hungry Ghost Month punya pasal...

Now no mood liao.....wanna RAGE....

LOL, no no not overkill our engine, but I meant, I heard that 1000 is enough. Won't 5000 mean more than enough? I can reason with 3000, but if anyone compared 3000 vs 5000, and there is a difference, then by all mean it is justified and good to go. If there isn;t any improvement at all........the extra money we throw in might be a waste.

Please bear in mind that I do not know anything about engine oil....I am just using my logic here, as the SC recommends 800, we upgrade it to 1000.  If any of you guys can help me explain, that would be great.

Thanks

Are we allowed to bring in other engine oil like Castrol Magnatex? Or Penzoil?

Its brand new spare slim rim and tyre from mitsu (EON can order from them or u can go directly to mitsu service centre and order)

remove 4 screws to unlock the supportive foam from the boot .. (lancer has these 4 holes too .. if the which to upgrade to fullsize spare rim) ..

The screw that locks the spare wheel is shorter for the slim tires.. i just leave it .. or u can cut something and place it in between like spacer..

BTW, the board fits nicely.. there is 2 hook on the plastic and the board 2 holes fits nicely .

Just remove all of the foam, put in the new slim tyre, cut a small piece from the foam and use back the original screw

U will need the small piece of foam between the tyre and screw as the screw is longer for the original bigger rim

oww, i have exceed 5k already now is already 5300+km. The mechanic wrote there 10k only service. Shud i bring the car to change oil filter only?

Today during lunch break did my 1K service at Proton SC Pandan Indah @ CKL (next to the Store). Full address:

CKL PANDAN INDAH SDN BHD (AUTHORIZED SERVICE CENTRE)
NO. 2 G & M, JALAN PANDAN INDAH 1/23C,
55100 PANDAN INDAH, KUALA LUMPUR ( 03-92747016 )

Opted for Syntium 3000 5W-40. Strangely, after the service, the engine sound very coarse and rough especially when I pressed the accelerator. Couldnt go back to the SC as I got meeting in the afternoon. Will definitely go back tomorrow.

BTW friends, any idea what possibly cause it? Thanks.

i m the new inspira owner. 1.8 manual.  will get my car by next monday... just wondering now still mitsubishi engine?? 

my freind said must change to mitsubishi rims coz lighter and more petrol saving. is it true?

First priority and must : install spoiler < how much? any good place.

Second priority : change logo, rims proton logo to mitsubishi < how much?

Third priority: change the front only , how much ?
I m from pj ss2/damansara jaya.

---

Added on September 6, 2011, 12:02 pmto confirm , now inspira using same engine as lancer right?  but how come i didnt see the MIVEC on inspira engine ???  i know nothing about car.

thank you!  now i google and found it in wikipedia.. hm.. yeah..

hi, i had my inspira wit this pb after my 10k servis... the car like no power.. i ask the technician they aso duno why... and the plug in computer also no code... have u guys facing any of this pb? the car like powerless and no kick.... any solution to this? even proton cant solve this pb....