Nice.

not nandroid la. find the backup in VRTweaks/backup on your sd card. then replace them without the .bak extension in the original folder. example is system/framework. status bar fc is cuz you have clashing mods that you installed previously, related to the same modified file.

litening i think is 4.2 already lol

wifi is stable if you are using CF root, when using nymph kernel the wifi stucks at obtainin ip address step, and unless u change ur ip to static address (which is impossible in my company), your wifi will stuck there forever@@

hehe ya o XD
just now i use the method at page 1 for rooting
Rooting using SuperOneClick
so if now i wan try install custom rom
do i need change kernel ?
cause i read at the page 1 of the villian rom

First of all, if you are upgrading from VillainROM 1.2 or above, just flash this from CF-Root version of CWM. I suggest a backup first. A wipe is not required, but if you have issues, is suggested. I updated without a wipe, and no issues here.

If you are installing from another ROM, or stock ROM, you need to be using the CF-Root kernel, as applicable for your current ROM. You can find CF-Root and instructions ....


i am from custom to root then now i should how ?

Hi guys, what to ask a noob question.
Let said after I flash litening rom or what, if I want to restore it back to original firmware, can I restore it back using nandroid?

this morning charged from a completely empty battery( i take out, put back, on to make sure really empty) to full 100% using the samsung usb cable coz the white cable abit sohai sohai wan and 1 dot gone. p/s using a andida 2k mah

will suggest you to flash thru odin for the CF root. after gain superuser and cwm (will have it automatically after flashing cf root) then wipe ur data and cache, then install villainrom via your cwm; which means put the villain file in you sd or ext_sd, then use cwm boot to recovery and flash it

i thought litening use Ninpo's kernel by default? why would it have problems.

i mean VillainRom. well he's asking me VR's wifi stability

VR got problem with Ninpo's kernel? 99.9% close to impossible to have wifi issues with both of them. and i never got them too.

I use 4.2 before and my wifi seems fine wor. Kernal Ninpo... Maybe lucky?


if you want to install VR do this.

1. if you do not have chain fire root, go xda, download it and install. If you have installed cf earlier then can ignore #1.
2. Now you got cf already. Install VR by, do backup if you want, MUST wipe full, wipe cache and wipe dalvik.
3. Now install VR through CWM. Power Up, Home and Power at same time. Chosoe install from zip and choose the VR file you saved in your sd card or phone memory.
4. Reboot.
5. Install VR tweak and install the updates in there (some are optional so is your choice).
6. Also good if you update the latest modem (link in VR forum), cos sometime it could affect signal, wifi or something.

---

Added on July 30, 2011, 1:18 pmSame. SpeedMod, Ninpo and all those kernal never give me such wifi problem....

This post has been edited by nicregi: Jul 30 2011, 01:18 PM

so now how
since i use superoneclick root my device already
my device now are rooted .....
CFROOT i cant found in page 1 here
or now i need install cwm?
cause my sgs2 just got superuser no cwm

oops!!!!!! edit: its lulz kernel, not nymph@@ sorry for the misleading

if lulz then yes i agree.

paiseh paiseh, nymph's problem for me is the setcpu =.= afterall still prefer CFroot. with nymph kernel the cwm seems got some bug, i cant reflash VR when using nymph kernel

Sorry late reply. I went to sleep just night

I just want to try and modify lil bit. You know once we use Android sure gatal tangan want to change here and there. I wish I can OC a bit to 1.3ghz but it seems it has wifi problem

I thought you already flashed it

o O
ok i go xda http://forum.xda-developers.com/showthread.php?t=1126522
find the chainfire already ^^
but ...
i follow all the rules and steps
it show ...
Indian phone
Phone Version/Baseband = DDKE2
PDA/Kernel = XWKE8
CSE/Build No. = XWKE8
i see back my phone setting > about phone
kenel version 2.6.35.7....XWKDD
baseband DXKF1
build is XWKF1

so is how ?
i stuck there

i dont want to argue with u.. but ive check both graph and it show the same figure.. Flash Batista n than flash the angelom thunderbolt 12.. see it for you self..

if u clever enough.. let u try it.. some rom i flash got that bugs.. but not for angelom.. i'm just sharing.. u can read the angelom changelog for thunderbolt 12.. they highlighted for stability, memory and battery tweak..

now 11 hours with moderate use.. (sms and phone call) still got 91%..

guys.. better try it by yourself.. see it by your own eyes..

This post has been edited by zoule HCo: Jul 30 2011, 01:50 PM

Use this:

http://forum.xda-developers.com/showthread.php?t=1103399

All the links are there. PM me if you need any help.

credit to CF:
Instructions - ODIN (short)
- Flash CF-Root-xxx-vX.X.tar (from the attached zip) as PDA in ODIN, without repartition. Done.

Instructions - ODIN (long)
- Follow these instructions to the letter. Do not touch any buttons or checkboxes that are not listed below to touch!
- Unzip the attached CF-Root-xxx-vX.X.zip
- (USB) Disconnect your phone from your computer
- Start ODIN
- Click the PDA button, and select CF-Root-xxx-vX.X.tar
- Put your phone in download mode
- (USB) Connect the phone to your computer
- Make sure repartition is NOT checked
- Click the START button
- Wait for the phone to reboot
- Done (if it took you more than 30 seconds, you need practise!)

Instructions - If you already have CF-Root
- Copy the zip file to your SD card
- Stop sharing SD card with computer over USB, unplug the cable, etc
- Applications -> CWM -> Flash kernel. Select the ZIP file on your SD card.
- Done

This post has been edited by nicregi: Jul 30 2011, 01:48 PM

just got my sgs2 exchange for a new unit once again...
everything looks good on this unit... hope it will stay on this condition....

Wa...you chance how many time le? Twice? Janji can get new one ok lo...hehe