alamak...   sad case. i thought can do bot on then happy dy. haih

I think you're getting confuse that 0W and 5W cold viscosity means both will start cold at their respective sub-zero temperature. What the number indicates is 0W can go over -35C while 5W can go up to 30C pour point. Both will remain fluid for easier engine start at subzero temperature.

However our temperature practically never go below 20C, so 0W to 20W have practically same cold start performance at the temperature.

What you have to watch out is extending the mileage. The bigger the difference in hot and cold viscosity, the more addictives and viscosity improver (VI) are used. Ie 0W40 had way more addictives and VI vs 15W40. Addictives and VI breaks down way faster than the oil itself. So when addictives wears out, the oil will not remain in grade meaning, if the base stock is actually a 30 weighted oil and VI is used to increase / decrease viscosity, losing addictives will mean the oil are unable to lower it viscosity to needed cold start or thicken them to 40 weight. It will start to stay at weight 30 only and thats not good for the engine.

True FS base VI without addictives is very high already. So even when losing some addictives, it will still remain in grade near its natural wide VI range rather than the artificial VI addictives. FS natural VI does not break down fast vs addictive VI that breaks down very easily. Our group 3+ VS has higher natural VI than mineral and semi thus its VII breaks down slower than mineral and semi. Thats why some try to extend the mileage. Unfortunately its still not true FS thus the addictives and VI will still breaks down as same rate as mineral/semi. Just that these FS will lessen damage to engine vs mineral/semi at same mileage. Still damage will be done if extend too long thus recommended change at 5K before any chances of VI truly wearing off.

You really the Oil Man here, every time any one mention about oil sure you apear to reply,,,,,,salut bro   ....just like stanby here 24/7 to answer anyting about oil...are you working or buisness at oil related company ?

how mcuh it cost and when launching oh?dunno proton will launch the package to BOT for our PE or not

Try CC5 

can..alot of campro engine BOT at xenonsport ady..quite reliable..can get around 170whp for stage 1 without change piston and block..stage 2 not suit for auto,bcoz too high horsepower..around can get 220-240whp for stage 2..

Try CC5 

---

Added on August 16, 2011, 10:26 am

I asked this to the technician as well..
He said our car not suit to install turbo because something in engine using alloy..
Alloy can't stand the pressure..
While new engine are using metal..

Bro your are really good in lub explanation. Really appreciate having you here. 
Oil Man.    Should call lub man. 
You think to much that proton will launch the package. 
CC5  . Using it now.
After BOT makan minyak or not?

CC5 good? And how much per piece for our stock tyre size?

How long you been using CC5?
Many shop recommend me to use CC5..
Currently got promotion RM 240 per pcs

saw carefour selling castrol magnatech 10-40w for RM85, but sold out already

anyone know where i can get it for cheap? used to get it at tesco for RM105... not cheap enough.

this year only change used about 1.5 months. RM 240 per piece is ok. New price. Last rime i changed mine or Rm230. LOL

I use CC5 quite good la. Comfortable than stock. Last time mine is Goodyear.

saw carefour selling castrol magnatech 10-40w for RM85, but sold out already

anyone know where i can get it for cheap? used to get it at tesco for RM105... not cheap enough.

btw what is your new job ?

is it...then avoid this lu....
coz i saw a lot ppl go there so just see any member here done their mod at his shop.
Oil Man   may me think about Oil Man in JAV

Try CC5 

---

Added on August 16, 2011, 10:26 am

I asked this to the technician as well..
He said our car not suit to install turbo because something in engine using alloy..
Alloy can't stand the pressure..
While new engine are using metal..

can..alot of campro engine BOT at xenonsport ady..quite reliable..can get around 170whp for stage 1 without change piston and block..stage 2 not suit for auto,bcoz too high horsepower..around can get 220-240whp for stage 2..

Sigh... Just got a new pe and have a check on cold start already have the iafm problem....... Damn disappointed, anyone have experience on sc at ss14 subang jaya??

when this happen? should be cavino la....

Aiyo....I never need to rape women wan....so far only women come rape me...so I cover myself with oil to escape them lor, makes me harder to catch hold on....the one in Penang copy cat lar...but he go rape ppl pulak...spoil my local orang minyak reputation...

Honestly tho...I also still learning but now "heng heng" reading up and discuss a lot this subject due to changing to FS abt half year ago.

Some more recently bought Idemitsu FS way cheaper than workshop, so read up to see if can know celup wan or not.

I'm sort of completionist and play safe guy, so when I wanted to use something for long term, I do research kaw kaw on the subject before doing the switch. Even buying my City earlier took me half a year before I buy. Only thing I buy fast fast without delay is rubber.....but then when it comes to strawberry flavor, peppermint, florescent...I stood there for minutes before I decide..

Aiyo....I never need to rape women wan....so far only women come rape me...so I cover myself with oil to escape them lor, makes me harder to catch hold on....the one in Penang copy cat lar...but he go rape ppl pulak...spoil my local orang minyak reputation...

Honestly tho...I also still learning but now "heng heng" reading up and discuss a lot this subject due to changing to FS abt half year ago.

Some more recently bought Idemitsu FS way cheaper than workshop, so read up to see if can know celup wan or not.

I'm sort of completionist and play safe guy, so when I wanted to use something for long term, I do research kaw kaw on the subject before doing the switch. Even buying my City earlier took me half a year before I buy. Only thing I buy fast fast without delay is rubber.....but then when it comes to strawberry flavor, peppermint, florescent...I stood there for minutes before I decide..

go buy black pepper, mushroom, herb, tomyam, kaya, peanut butter sauce la...
pour on the sausage n squeeze on abalone!! sure yummi!! 

Tomyam & black pepper?? Walao.. damn spicy wan leh..

Aiyo....I never need to rape women wan....so far only women come rape me...so I cover myself with oil to escape them lor, makes me harder to catch hold on....the one in Penang copy cat lar...but he go rape ppl pulak...spoil my local orang minyak reputation...

Honestly tho...I also still learning but now "heng heng" reading up and discuss a lot this subject due to changing to FS abt half year ago.

Some more recently bought Idemitsu FS way cheaper than workshop, so read up to see if can know celup wan or not.

I'm sort of completionist and play safe guy, so when I wanted to use something for long term, I do research kaw kaw on the subject before doing the switch. Even buying my City earlier took me half a year before I buy. Only thing I buy fast fast without delay is rubber.....but then when it comes to strawberry flavor, peppermint, florescent...I stood there for minutes before I decide..

yeah rubber got diffrent tread like tyer also mah.....maybe she like the revers screw tread....

Sell backside at Brickfields

gone liao la this thread...

  brickfield is not for new comer it was the territory of ah gua,..... then end up your customer are mostly ah gua