Have you tried to switch off and then on again on both linksys and V10 and then try again?

thanks...

i found out that the 5mins problem is not resolve on V10.. it's still same like wat happen to HDpro, some of the copied file will not copy completely all the detail, and will end on the last 5mins..

This only happen if i off the connection between HDpro/V10 and my PC..

if the connection remain on, so far i never face this problem..

hmm... so weird..

file become 0kb out of sudden never happen after i changed to V10, which it's s common problem in my case for HDpro...

I had the issue when try using USB upgrade and prompt me " no update is found"

---

Added on September 3, 2011, 5:47 pmyangxi,

i've copied the image file to the ROOT of my USB drive and V10 telling me that no latest update available.

and 1 more thing, 1 of my USB port spoil, i didn't realise it till i put in my thumbdrive just now and V10 cant detect anything from the port, another port is working, so now i only got 1 working USB port instead of 2

---

Added on September 3, 2011, 5:48 pm
i've no problem opening Upnp from stock firmware..

---

Added on September 3, 2011, 9:11 pmfirmware updated using reset button, cannot use the menu to upgraded...

firmware 

Date: 26/10/2011

http://www.4shared.com/file/KcUJs0r2/V10_20111026.html
1. Copy install.img to the root directory of a USB flash drive and connect it to any USB host port of the
unit.
2. Press and hold on to the power button on the front panel of the unit.
3. Switch on the main power.
4. Release the power button when the firmware update starts flashing on your display in a moment and
will automatically reboot when update is completed.

**Do not power off the unit during the flashing process!**
password protect.  only my customer can get.

(if i no reply, try contact other forumer here)

Hi,

I have problem download failed the URL attached, do you have other URL for me to download.
Thanks.

kim

firmware 

Date: 26/10/2011

http://www.4shared.com/file/KcUJs0r2/V10_20111026.html
1. Copy install.img to the root directory of a USB flash drive and connect it to any USB host port of the
unit.
2. Press and hold on to the power button on the front panel of the unit.
3. Switch on the main power.
4. Release the power button when the firmware update starts flashing on your display in a moment and
will automatically reboot when update is completed.

**Do not power off the unit during the flashing process!**
password protect.  only my customer can get.

(if i no reply, try contact other forumer here)